Abstract
Deep learning approaches have emerged as promising solutions for vibration-based damage assessment. Although these approaches have shown great potential, further investigations are required to apply them to real-world problems, as most studies have been limited to training with experimental and numerical simulation data. To address this, this study examines the feasibility of employing a one-dimensional convolutional neural network (1D-CNN) for damage assessment by utilizing both simulated data and field applications on an actual truss bridge. Extensive parametric studies were conducted to investigate the performance of the model under various architectural configurations, sensor quantities, sensor locations, and degrees of damage. The results of the hyperparameter optimization show that a moderate number of optimizable parameters is essential for the universal applicability of optimized hyperparameters across different situations or configurations. Comparative studies with other machine learning and deep learning algorithms have validated the superior performance of the 1D-CNN in vibration-based damage detection. Finally, the field application demonstrated the robust potential of the 1D-CNN for real-world scenarios, achieving an impressive F1-score of 90.58% even with single-channel measurements.
Similar content being viewed by others
References
Abdeljaber O, Avci O (2016) Nonparametric structural damage detection algorithm for ambient vibration response: Utilizing Artificial Neural Networks and Self-Organizing Maps. Journal of Architectural Engineering 22(2), DOI: https://doi.org/10.1061/(asce)ae.1943-5568.0000205
Abdeljaber O, Avci O, Kiranyaz MS, Boashash B, Sodano H, Inman DJ (2018) 1-D CNNs for structural damage detection: Verification on a structural health monitoring benchmark data. Neurocomputing 275:1308–1317, DOI: https://doi.org/10.1016/j.neucom.2017.09.069
Abdeljaber O, Avci O, Kiranyaz S, Gabbouj M, Inman DJ (2017) Realtime vibration-based structural damage detection using one-dimensional convolutional neural networks. Journal of Sound and Vibration 388:154–170, DOI: https://doi.org/10.1016/j.jsv.2016.10.043
Abellan-Nebot JV, Romero Subirón F (2010) A review of machining monitoring systems based on artificial intelligence process models. In International Journal of Advanced Manufacturing Technology 47(1–4):237–257, DOI: https://doi.org/10.1007/s00170-009-2191-8
Almutairi M, Nikitas N, Abdeljaber O, Avci O, Bocian M (2021) A methodological approach towards evaluating structural damage severity using 1D CNNs. Structures 34:4435–4446, DOI: https://doi.org/10.1016/j.istruc.2021.10.029
Avci O, Abdeljaber O, Kiranyaz S, Hussein M, Inman DJ (2018) Wireless and real-time structural damage detection: A novel decentralized method for wireless sensor networks. Journal of Sound and Vibration 424:158–172, DOI: https://doi.org/10.1016/j.jsv.2018.03.008
Azimi M, Eslamlou AD, Pekcan G (2020) Data-driven structural health monitoring and damage detection through deep learning: State-of the- art review. Sensors (Switzerland) 20(10), DOI: https://doi.org/10.3390/s20102778
Carden EP, Fanning P (2004) Vibration based condition monitoring: A review. In Structural Health Monitoring 3(4):355–377, DOI: https://doi.org/10.1177/1475921704047500
Cha YJ, Choi W, Büyüköztürk O (2017) Deep learning-based crack damage detection using convolutional neural networks. Computer-Aided Civil and Infrastructure Engineering 32(5):361–378, DOI: https://doi.org/10.1111/mice.12263
Cortes C, Vapnik V, Saitta L (1995) Support-vector networks editor. In Machine Leaming (Vol. 20). Kluwer Academic Publishers
de Lautour OR, Omenzetter P (2010) Damage classification and estimation in experimental structures using time series analysis and pattern recognition. Mechanical Systems and Signal Processing, 24(5):1556–1569, DOI: https://doi.org/10.1016/j.ymssp.2009.12.008
Doebling SW, Farrar CR, Prime MB (1998) A summary review of vibration-based damage identification methods. The Shock and Vibration Digest 30(2):91–105, DOI: https://doi.org/10.1177/058310249803000201
Figueiredo E, Park G, Farrar CR, Worden K, Figueiras J (2011) Machine learning algorithms for damage detection under operational and environmental variability. Structural Health Monitoring 10(6):559–572, DOI: https://doi.org/10.1177/1475921710388971
Flah M, Ragab M, Lazhari M, Nehdi ML (2022) Localization and classification of structural damage using deep learning single-channel signal-based measurement. Automation in Construction, 139, DOI: https://doi.org/10.1016/j.autcon.2022.104271
Ghiasi R, Torkzadeh P, Noori M (2016) A machine-learning approach for structural damage detection using least square support vector machine based on a new combinational kernel function. Structural Health Monitoring 15(3):302–316, DOI: https://doi.org/10.1177/1475921716639587
Gomez-Cabrera A, Escamilla-Ambrosio PJ (2022) Review of machine-learning techniques applied to structural health monitoring systems for building and bridge structures. In Applied Sciences (Switzerland) 12(21), MDPI, DOI: https://doi.org/10.3390/app122110754
Gui G, Pan H, Lin Z, Li Y, Yuan Z (2017) Data-driven support vector machine with optimization techniques for structural health monitoring and damage detection. KSCE Journal of Civil Engineering 21(2):523–534, DOI: https://doi.org/10.1007/s12205-017-1518-5
Ince T, Kiranyaz S, Eren L, Askar M, Gabbouj M (2016) Real-time motor fault detection by 1-D convolutional neural networks. IEEE Transactions on Industrial Electronics 63(11):7067–7075, DOI: https://doi.org/10.1109/TIE.2016.2582729
Khodabandehlou H, Pekcan G, Fadali MS (2019) Vibration-based structural condition assessment using convolution neural networks. Structural Control and Health Monitoring 26(2), DOI: https://doi.org/10.1002/stc.2308
Kilichev D, Kim W (2023) Hyperparameter optimization for 1D-CNN-based network intrusion detection using GA and PSO. Mathematics 11(17), DOI: https://doi.org/10.3390/math11173724
Kim B, Cho S (2019) Image-based concrete crack assessment using mask and region-based convolutional neural network. Structural Control and Health Monitoring 26(8), DOI: https://doi.org/10.1002/stc.2381
Kim C-W, Zhang F-L, Chang K-C, McGetrick PJ, Goi Y (2021) Ambient and vehicle-induced vibration data of a steel truss bridge subject to artificial damage. Journal of Bridge Engineering 26(7), DOI: https://doi.org/10.1061/(ASCE)BE.1943-5592.0001730
Kiranyaz S, Ince T, Gabbouj M (2016) Real-time patient-specific ECG classification by 1-D convolutional neural networks. IEEE Transactions on Biomedical Engineering 63(3):664–675, DOI: https://doi.org/10.1109/TBME.2015.2468589
Lee J, Kim S (2007) Structural damage detection in the frequency domain using neural networks. Journal of Intelligent Material Systems and Structures 18(8):785–792, DOI: https://doi.org/10.1177/1045389X06073640
Li X, Guo H, Xu L, Xing Z (2023) Bayesian-based hyperparameter optimization of 1D-CNN for structural anomaly detection. Sensors 23(11), DOI: https://doi.org/10.3390/s23115058
Liberatore S, Carman GP (2004) Power spectral density analysis for damage identification and location. Journal of Sound and Vibration 274(3–5):761–776, DOI: https://doi.org/10.1016/S0022-460X(03)00785-5
Lin YZ, Nie ZH, Ma HW (2017) Structural damage detection with automatic feature-extraction through deep learning. Computer-Aided Civil and Infrastructure Engineering 32(12):1025–1046, DOI: https://doi.org/10.1111/mice.12313
Maia NMM, Almeida RAB, Urgueira APV, Sampaio RPC (2011) Damage detection and quantification using transmissibility. Mechanical Systems and Signal Processing 25(7):2475–2483, DOI: https://doi.org/10.1016/j.ymssp.2011.04.002
Mehrjoo M, Khaji N, Moharrami H, Bahreininejad A (2008) Damage detection of truss bridge joints using Artificial Neural Networks. Expert Systems with Applications 35(3):1122–1131, DOI: https://doi.org/10.1016/j.eswa.2007.08.008
Nogueira F (2014) Bayesian optimization: Open source constrained global optimization tool for Python
Pourbasheer E, Riahi S, Ganjali MR, Norouzi P (2009) Application of genetic algorithm-support vector machine (GA-SVM) for prediction of BK-channels activity. European Journal of Medicinal Chemistry 44(12):5023–5028, DOI: https://doi.org/10.1016/j.ejmech.2009.09.006
Sattarifar A, Nestorović T (2022) Damage localization and characterization using one-dimensional convolutional neural network and a sparse network of transducers. Engineering Applications of Artificial Intelligence, 115, DOI: https://doi.org/10.1016/j.engappai.2022.105273
Sharma S, Sen S (2020) One-dimensional convolutional neural network-based damage detection in structural joints. Journal of Civil Structural Health Monitoring 10(5):1057–1072, DOI: https://doi.org/10.1007/s13349-020-00434-z
Sohn H, Farrar CR, Hemez FM, Shunk DD, Stinemates DW, Nadler BR, Czarnecki JJ (2003) A review of structural health monitoring literature: 1996–2001. Los Alamos National Laboratory, USA 1:16
Sony S, Dunphy K, Sadhu A, Capretz M (2021) A systematic review of convolutional neural network-based structural condition assessment techniques. In Engineering Structures (Vol. 226). Elsevier Ltd., DOI: https://doi.org/10.1016/j.engstruct.2020.111347
Sony S, Gamage S, Sadhu A, Samarabandu J (2022) Vibration-based multiclass damage detection and localization using long short-term memory networks. Structures 35:436–451, DOI: https://doi.org/10.1016/j.istruc.2021.10.088
Teng S, Chen G, Yan Z, Cheng L, Bassir D (2023) Vibration-based structural damage detection using 1-D convolutional neural network and transfer learning. Structural Health Monitoring 22(4):2888–2909, DOI: https://doi.org/10.1177/14759217221137931
Tran VL, Vo TC, Nguyen TQ (2023) One-dimensional convolutional neural network for damage detection of structures using time series data. Asian Journal of Civil Engineering, DOI: https://doi.org/10.1007/s42107-023-00816-w
Wu R-T, Jahanshahi MR (2018) Data fusion approaches for structural health monitoring and system identification: Past, present, and future. Structural Health Monitoring 19(2):552–586, DOI: https://doi.org/10.1177/1475921718798769
Xu Y, Wei S, Bao Y, Li H (2019) Automatic seismic damage identification of reinforced concrete columns from images by a region-based deep convolutional neural network. Structural Control and Health Monitoring 26(3), DOI: https://doi.org/10.1002/stc.2313
Yan YJ, Cheng L, Wu ZY, Yam LH (2007) Development in vibration-based structural damage detection technique. Mechanical Systems and Signal Processing 21(5):2198–2211, DOI: https://doi.org/10.1016/j.ymssp.2006.10.002
Yuen KV, Lam HF (2006) On the complexity of artificial neural networks for smart structures monitoring. Engineering Structures 28(7):977–984, DOI: https://doi.org/10.1016/j.engstruct.2005.11.002
Zhang G-Q, Wang B, Li J, Xu Y-L (2022) The application of deep learning in bridge health monitoring: A literature review. Advances in Bridge Engineering 3(1), DOI: https://doi.org/10.1186/s43251-022-00078-7
Acknowledgments
This work was supported by the 2021 Research Fund of the University of Seoul for Sunjoong Kim. Also, this work was supported by National Research Foundation of Korea (NRF) grants funded by the Korea government (MSIT) [grant numbers RS-2023-00213436] for Soyeon Park (First Author). The datasets used in Section 4 are available in the following data depository link: https://data.mendeley.com/datasets/sc8whx4pvm/2
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Park, S., Kim, S. Enhancing Vibration-based Damage Assessment with 1D-CNN: Parametric Studies and Field Applications. KSCE J Civ Eng (2024). https://doi.org/10.1007/s12205-024-1994-3
Received:
Revised:
Accepted:
Published:
DOI: https://doi.org/10.1007/s12205-024-1994-3