Abstract
The study investigated how simulated notches within concrete-filled steel tube (CFST) columns affect their mechanical performance. It aimed to understand the impact of notch length, orientation, and location within the steel tubes on the behavior of these circular columns. Study conducted compressive tests on a total of 32 CFST specimens, varying in thickness (3 mm and 6 mm) and filled with High-Strength Concrete (HSC) or Normal-Strength Concrete (NSC). Four control specimens without notches served as reference points. Results indicated that CFST columns with notches exhibited reduced mechanical performance compared to those without notches. Notch parameters played a crucial role in this reduced performance. Notch length and orientation had a more significant influence than notch location. It also highlighted that the thickness of the steel tube was a paramount factor, surpassing the importance of concrete type. In summary, the study emphasized that presence of notches in CFST columns significantly impacted their load-bearing capacity, buckling behavior, and failure modes. Length and orientation of notches were identified as critical factors, with steel tube thickness being a dominant factor in determining overall mechanical performance of these columns. These findings provide valuable insights for structural engineers and designers working with CFST columns in various construction applications.
Similar content being viewed by others
References
Alfawakhiri F (1997) Behavior of high strength concrete filled circular steel tube beam-columns. University of Ottawa, Canada
ASTM:C617/C617M-15 (2015) Standard practice for capping cylindrical concrete specimens, ASTM International, West Conshohocken, PA., USA
ASTME8/E8M-16 (2016) Standard test methods for tension testing of metallic material ASTM International. West Conshohocken, PA 19428–2959, USA
Ding F, Wen B, Liu X, Wang H (2017) Composite action of notched circular CFT stub columns under axial compression. Steel and Composite Structures, An International Journal 24(3):309–322, DOI: https://doi.org/10.1016/j.tws.2017.02.018
Faxing D, Lei F, Zhiwu Y, Gang L (2015) Mechanical performances of concrete-filled steel tubular stub columns with round ends under axial loading. Thin-Walled Structures 97:22–34, DOI: https://doi.org/10.1016/j.tws.2015.07.021
Ghannam S (2016) Flexural strength of concrete-filled Steel tubular beam with partial replacement of coarse aggregate by granite. International Journal of Civil Engineering and Technology 7(5)
Giakoumelis G Lam D (2004) Axial capacity of circular concrete-filled tube columns. Journal of Constructional Steel Research 60(7): 1049–1068, DOI: https://doi.org/10.1016/j.jcsr.2003.10.001
Guo L, Huang H, Jia C, Romanov K (2020) Axial behavior of square CFST with local corrosion simulated by artificial notch. Journal of Constructional Steel Research 174:106314, DOI: https://doi.org/10.1016/j.jcsr.2003.10.001
Han L-H, Li W, Bjorhovde R (2014) Developments and advanced applications of concrete-filled steel tubular (CFST) structures: Members. Journal of Constructional Steel Research 100:211–228, DOI: https://doi.org/10.1016/j.jcsr.2014.04.016
Huang H, Guo L, Qu B, Jia C, Elchalakani M (2021) Tests of circular concrete-filled steel tubular stub columns with artificial notches representing local corrosions. Engineering Structures 242(May): 112598, DOI: https://doi.org/10.1016/j.engstruct.2021.112598
Lai Z, Varma AH, Zhang K (2014) Noncompact and slender rectangular CFT members: Experimental database, analysis, and design. Journal of Constructional Steel Research 101:455–468, DOI: https://doi.org/10.1016/j.jcsr.2014.06.004
Li B, Ding F, Yu Y, Zhang J, Huang Q, Gong C, Wang H (2022) Research on confinement effect of the outer steel tube in notched square CFST columns. Materials 15(15):5161, DOI: https://doi.org/10.3390/ma15155161
Li GC, Yang ZJ, Lang Y, Fang C (2013) Behaviour of high strength concrete filled square steel tubular columns with inner CFRP circular tube under bi-axial eccentric loading. Advanced Steel Construction 9:231–246
Ratio W, Hong G, Kim W, Choi I, Chung K (2013) Structural performance of high strength concrete filled steel tube with the structural performance of high strength concrete filled steel tube with the width-to-thicknessratio. September 2014, DOI: https://doi.org/10.4028/www.scientific.net/AMM.284-287.1390
Tao Z, Uy B, Liao F-Y, Han L-H (2011) Nonlinear analysis of concrete-filled square stainless steel stub columns under axial compression. Journal of Constructional Steel Research 67(11):1719–1732, DOI: https://doi.org/10.1016/j.jcsr.2011.04.012
Wang Q, Peng K, Guo Y-H, Shao Y (2022) Experimental study on hysteretic behavior of concrete-filled square carbon fiber-reinforced polymer steel tubular beam-column. ACI Structural Journal 119(3): 67–80, DOI: https://doi.org/10.14359/51734491
Zeghiche J, Chaoui K (2005) An experimental behaviour of concrete-filled steel tubular columns. Journal of Constructional Steel Research 61(1):53–66, DOI: https://doi.org/10.1016/j.jcsr.2004.06.006
Zhu H, Zhang H, Liu L (2021) Experimental study on cyclic lateral loaded circular CFST Members with initial imperfections. KSCE Journal of Civil Engineering v25(8)3064–3074, DOI: https://doi.org/10.1007/s12205-021-1931-7
Acknowledgments
Not Applicable
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Mohammed, M., Hasan, M.F., Hasan, H.F. et al. Axial Compression Tests for Circular Concrete-Filled Steel Tube (CFST) Columns with Notch Imperfection. KSCE J Civ Eng (2024). https://doi.org/10.1007/s12205-024-1183-4
Received:
Revised:
Accepted:
Published:
DOI: https://doi.org/10.1007/s12205-024-1183-4