Abstract
A building may be subjected to multiple accidental loads during its service-life. Partially precast concrete (PC) beam is a primary force-bearing member. When subjected to an impact load, its impact resistance will significantly affect the overall safety of the structure. In this study, five PC beams were designed and manufactured, and drop-hammer impact tests were performed. The influences of impact mass and impact height on the failure mode and the dynamic response of the component under different loading conditions were examined. The typical failure mode of the test beam under a dynamic load was derived from the failure mode and crack distribution. The dynamic responses such as impact force, supporting reaction force, and displacement-time-history curve were obtained by the test. With increasing impact energy, the peak impact force increased from 3,353 to 3,708 kN, the peak mid-span displacement increased from 33.6 to 47.3 mm, and the residual mid-span displacement increased from 11.9 to 15.1 mm. Subsequently, the law of energy dissipation in the impact process was analyzed using the combined curves of the impact force-mid-span displacement and support reaction force-mid-span displacement. Furthermore, the result obtained by the integration of the reaction force-displacement curve in the middle of the span is more suitable for evaluating the overall energy consumption of the beam. The vibration energy and internal energy of the beam itself account for the primary part of the remaining energy.
Similar content being viewed by others
References
Chung CH, Lee J, Gil JH (2014) Structural performance evaluation of a precast prefabricated bridge column under vehicle impact loading. Structure and Infrastructure Engineering 10:777–791, DOI: https://doi.org/10.1080/15732479.2013.767841
Cotsovos DM, Stathopoulos ND, Zeris CA (2008) Behavior of RC beams subjected to high rates of concentrated loading. Journal of Structural Engineering 134(12):1839–1851, DOI: https://doi.org/10.1061/(ASCE)0733-9445(2008)134:12(1839)
Das AS, Li B (2018) Simplified analytical models to predict low-velocity impact response of RC beams. Practice Periodical on Structural Design and Construction 23(2):04018002, DOI: https://doi.org/10.1061/(ASCE)SC.1943-5576.0000357
Fu YQ, Yu XL, Dong XL, Zhou FH (2020) Investigating the failure behaviors of RC beams without stirrups under impact loading. International Journal of Impact Engineering 137:103432, DOI: https://doi.org/10.1016/j.ijimpeng.2019.103432
GB 50010-2010 (2015) Code for design of concrete structures. GB50010–2010, Ministry of Housing and Urban-Rural Development of the People’s Republic of China, Beijing, China
Guo JL, Cai J, Chen WS (2017) Inertial effect on RC beam subjected to impact loads. International Journal of Structural Stability and Dynamics 17(4):1750053, DOI: https://doi.org/10.1142/S0219455417500535
Guo L, Mao RW, Liu ZF, Li SQ (2020) Dynamic large deflection response of RC beams under low-speed impact loading. Shock and Vibration 2020:8812890, DOI: https://doi.org/10.1155/2020/8812890
Huang ZJ, Chen WS, Hao H, Chen ZY, Pham TM, Tran TT, Elchalakani M (2021) Shear behaviour of ambient cured geopolymer concrete beams reinforced with BFRP bars under static and impact loads. Engineering Structures 231:111730, DOI: https://doi.org/10.1016/j.engstruct.2020.111730
Hwang HJ, Kang THK, Kim CS (2019) Numerical model for flexural behavior of reinforced concrete members subjected to low-velocity impact loads. Aci Structural Journal 116(2):65–76, DOI: https://doi.org/10.14359/51711136
Isaac P, Darby A, Ibell T, Evernden M (2016) Experimental investigation into the force propagation velocity due to hard impacts on reinforced concrete members. International Journal of Impact Engineering 100:131–138, DOI: https://doi.org/10.1016/j.ijimpeng.2016.09.005
JGJ1-2014 (2014) Technical specification for precast concrete structures. JGJ1-2014, Ministry of Housing and Urban-Rural Development of the People’s Republic of China, Beijing, China
Jin L, Xu JD, Zhang RB, Du X (2017) Numerical study on the impact performances of reinforced concrete beams: A mesoscopic simulation method. Engineering Failure Analysis 80:141–163, DOI: https://doi.org/10.1016/j.engfailanal.2017.06.005
Kishi N, Mikami H, Matsuoka KG (2002) Impact behavior of shear-failure-type RC beams without shear rebar. International Journal of Impact Engineering 27(9):955–968, DOI: https://doi.org/10.1016/S0734-743X(01)00149-X
Li H W, Chen W S, Hao H (2019a) Influence of drop weight geometry and interlayer on impact behavior of RC beams. International Journal of Impact Engineering 131:222–237, DOI: https://doi.org/10.1016/j.ijimpeng.2019.04.028
Li HW, Chen WS, Hao H (2019b) Dynamic response of precast concrete beam with wet connection subjected to impact loads. Engineering Structures 191:247–263, DOI: https://doi.org/10.1016/j.engstruct.2019.04.051
Li HW, Chen WS, Hao H (2020) Numerical study of precast concrete beam under impact loads. Lecture Notes in Civil Engineering 37:557–568, DOI: https://doi.org/10.1007/978-981-13-7603-0_55
Li HW, Chen WS, Pham TM, Hao H (2021) Analytical and numerical studies on impact force profile of RC beam under drop weight impact. International Journal of Impact Engineering 147:103743, DOI: https://doi.org/10.1016/j.ijimpeng.2020.103743
Oliveira MC, Teles DVC, Amorim DLNF (2020) Shear behaviour of reinforced concrete beams under impact loads by the lumped damage framework. Frattura ed Integrita Strutturale 53:13–25, DOI: https://doi.org/10.3221/IGF-ESIS.53.02
Pham TM, Hao H (2016a) Effect of the plastic hinge and boundary conditions on the impact behavior of reinforced concrete beams. International Journal of Impact Engineering 102:74–85, DOI: https://doi.org/10.1016/j.ijimpeng.2016.12.005
Pham TM, Hao H (2016b) Impact behavior of FRP-strengthened RC beams without stirrups. Journal of Composites for Construction 20(4): 04016011, DOI: https://doi.org/10.1061/(ASCE)CC.1943-5614.0000671
Pham TM, Hao H (2017) Plastic hinges and inertia forces in RC beams under impact loads. International Journal of Impact Engineering 103:1–11, DOI: https://doi.org/10.1016/j.ijimpeng.2016.12.016
Pham TM, Hao H (2018) Influence of global stiffness and equivalent model on prediction of impact response of RC beams. International Journal of Impact Engineering 113:88–97, DOI: https://doi.org/10.1016/j.ijimpeng.2017.11.014
Pham TM, Hao YF, Hao H (2018) Sensitivity of impact behaviour of RC beams to contact stiffness. International Journal of Impact Engineering 2018;112:155–164, DOI: https://doi.org/10.1016/j.ijimpeng.2017.09.015
Saatci S, Vecchio FJ (2009) Effects of shear mechanisms on impact behavior of reinforced concrete beams. ACI Structural Journal 106(1):78–86, DOI: https://doi.org/10.1109/ICNSC.2009.4919362
Yan QS, Sun BW, Liu XM, Wu J (2018) The effect of assembling location on the performance of precast concrete beam under impact load. Advances in Structural Engineering 21(8):1211–1222, DOI: https://doi.org/10.1177/1369433217737119
Yong ACY, Lam NTK, Menegon SJ (2021) Closed-form expressions for improved impact resistant design of reinforced concrete beams. Structures 29:1828–1836, DOI: https://doi.org/10.1016/j.istruc.2020.12.041
Yu Y, Lee S, Cho JY (2021) Deflection of reinforced concrete beam under low-velocity impact loads. International Journal of Impact Engineering 154(1):103878, DOI: https://doi.org/10.1016/j.ijimpeng.2021.103878
Zhao DB, Yi WJ, Kunnath SK (2017) Shear mechanisms in reinforced concrete beams under impact loading. Journal of Structural Engineering 143(9):04017089, DOI: https://doi.org/10.1061/(ASCE)ST.1943-541X.0001818
Zhao DB, Yi WJ, Kunnath SK (2018) Numerical simulation and shear resistance of reinforced concrete beams under impact. Engineering Structures 166:387–401, DOI: https://doi.org/10.1016/j.engstruct.2018.03.072
Zhao WC, Qian J (2018) A new observation on the transient behavior of reinforced concrete beams under impact loading. Structures Conference 332–342, DOI: https://doi.org/10.1061/9780784481349.032
Zhao WC, Qian J (2019) Dynamic response and shear demand of reinforced concrete beams subjected to impact loading. International Journal of Structural Stability and Dynamics 19(8):1950091, DOI: https://doi.org/10.1142/S0219455419500913
Zhao WC, Qian J, Jia P Z (2019) Peak response prediction for RC beams under impact loading. Shock and Vibration 2019(st2):1–12, DOI: https://doi.org/10.1155/2019/6813693
Zhou XW, Wang XY, Zhang RC, Zhang GX (2020a) An experimental study of the effects of different reinforcement ratios on the impact resistance behaviors of reinforced concrete beams. Journal of Testing and Evaluation 48(3):2162–2184, DOI: https://doi.org/10.1520/JTE20190536
Zhou XW, Wang XY, Zhang RC, Zhang W (2020b) Experimental and numerical simulation studies of RC beams under the actions of equal energy impact loads. Advances in Civil Engineering 2020(1):1–14, DOI: https://doi.org/10.1155/2020/8874097
Acknowledgments
The authors would like to acknowledge the financial support from National Natural Science Foundation of China (NO. 51578160), the Science and Technology Planning Project of Fuzhou (NO. 2021-Y-082), the Tianjin University-Fuzhou University Independent Innovation Fund Cooperation Project (NO. TF2021-9), and the Educational Research Project for Young and Middle-aged Teachers of the Education Department of Fujian Province (NO. JAT190430).
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Mao, H., Yan, X., Zong, C. et al. Experimental Research on Impact Resistance of Partially Precast Concrete Beams. KSCE J Civ Eng 26, 4038–4051 (2022). https://doi.org/10.1007/s12205-022-0364-2
Received:
Revised:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s12205-022-0364-2