Skip to main content
Log in

Permanent Deformation Characteristics of Warm Asphalt Binders under Reduced Aging Conditions

  • Highway Engineering
  • Published:
KSCE Journal of Civil Engineering Aims and scope

Abstract

Warm Mix Asphalt (WMA) technologies allow a 20 to 40°C reduction in production temperatures of asphalt mixes. These technologies are often synergistically combined with modified asphalt binders to tackle the increased production temperature requirements with these binders. Because of lower production temperatures, the asphalt binders containing WMA additives undergo reduced short-term aging and thus need to be examined for permanent deformation behavior at different reductions in production temperatures. The present study evaluates permanent deformation characteristics of warm asphalt binders as function of short-term aging temperature, modified binder type, and various dosages of a wax-based WMA additive: Sasobit. Experimental variables included are: three short-term aging temperatures (163°C, 143°C, and 123°C), two modified asphalt binders (polymer, and crumb rubber modified), and three contents of WMA additive (1%, 2%, and 3%). Warm binders as well as control binders are characterized in terms of viscosity, failure temperature, temperature sweep, frequency sweep, and multiple stress creep and recovery tests. WMA additive compensates the reduced stiffness of binders on being aged at lower temperatures, as rheological parameters of warm binders aged at 143°C and 123°C compare well with control binders. Statistical models for the rheological parameters as function of the experimental variables are also developed.

This is a preview of subscription content, log in via an institution to check access.

Access this article

Price excludes VAT (USA)
Tax calculation will be finalised during checkout.

Instant access to the full article PDF.

Similar content being viewed by others

References

  • American Association of State Highway and Transportation Officials (2010). Standard Specification for Performance-Graded Asphalt Binder Using Multiple Stress Creep Recovery (MSCR) Test (AASHTO MP 19), AASHTO., Washington, D.C. United States.

  • Abbas, A. R., Nazzal, M., Kaya, S., Akinbowale, S., Subedi, B., Arefin, M. S., and Abu Qtaish, L. (2016). “Effect of aging on foamed warm mix asphalt produced by water injection.” Journal of Materials in Civil Engineering, Vol. 28, No. 11, 04016128:1-11, DOI: 10.1061/(ASCE)MT.1943-5533.0001617.

    Article  Google Scholar 

  • Akisetty, C. K., Gandhi, T., Lee, S. J., and Amirkhanian, S. N. (2010). “Analysis of rheological properties of rubberized binders containing warm asphalt additives.” Canadian Journal of Civil Engineering, Vol. 37, No. 5, pp. 763–771, DOI: 10.1139/L10-020.

    Article  Google Scholar 

  • Arega, Z., Bhasin, A., Motamed, A., and Turner, F. (2011). “Influence of warm-mix additives and reduced aging on the rheology of asphalt binders with different natural wax contents.” Journal of Materials in Civil Engineering, Vol. 23, No. 10, pp. 1453–1459, DOI: 10.1061/(ASCE)MT.1943-5533.0000315.

    Article  Google Scholar 

  • ASTM International (2012). Standard Test Method for Effect of Heat and Air on a Moving Film of Asphalt (Rolling Thin-Film Oven Test) (ASTM D2872–12e1), DOI: 10.1520/D2872-12E01, ASTM International, West Conshohocken, PA, USA.

  • ASTM International (2015). Standard Test Method for Viscosity Determination of Asphalt at Elevated Temperatures Using a Rotational Viscometer (ASTM D4402/D4402M–15), DOI: 10.1520/D4402_ D4402M-15, ASTM International, West Conshohocken, PA, USA.

  • ASTM International (2010). Standard Test Method for Multiple Stress Creep and Recovery (MSCR) of Asphalt Binder Using a Dynamic Shear Rheometer (ASTM D7405–10a), DOI: 10.1520/D7405-15, ASTM International, West Conshohocken, PA, USA.

  • Biro, S., Gandhi, T., and Amirkhanian, S. (2009). “Midrange temperature rheological properties of warm asphalt binders.” Journal of Materials in Civil Engineering, Vol. 21, No. 7, pp. 316–323, DOI: 10.1061/(ASCE)0899-1561(2009)21%3A7(316).

    Article  Google Scholar 

  • Brown, E. R., Kandhal, P. S., Roberts, F. L., Kim, Y. R., Lee, D. Y., and Kennedy, T. W. (2009). Hot mix asphalt materials, mixture design, and construction, 3rd ed., TRB, Washinston, D.C., United States.

    Google Scholar 

  • D’Angelo, J. A. (2009). “The relationship of the MSCR test to rutting.” Road Materials and Pavement Design, Vol. 10, 2009 -Issue sup1, pp. 61–80, DOI: 10.1080/14680629.2009.9690236.

    Article  Google Scholar 

  • Edwards, Y., Tasdemir, Y., and Isacsson, U. (2007). “Rheological effects of commercial waxes and polyphosphoric acid in bitumen 160/220–high and medium temperature performance.” Construction and Building Materials, Vol. 21, No. 10, pp. 1899–1908, DOI: 10.1016/j.conbuildmat.2006.07.012.

    Article  Google Scholar 

  • Gandhi, T., Akisetty, C., and Amirkhanian, S. (2009). “Laboratory evaluation of warm asphalt binder aging characteristics.” International Journal of Pavement Engineering, Vol. 10, No. 5, pp. 353–359, DOI: 10.1080/10298430802342724.

    Article  Google Scholar 

  • Hossain, Z., Lewis, S., Zaman, M., Buddhala, A., and O’Rear, E. (2013). “Evaluation for warm-mix additive-modified asphalt binders using spectroscopy techniques.” Journal of Materials in Civil Engineering, Vol. 25, No. 2, pp. 149–159, DOI: 10.1061/(ASCE) MT.1943-5533.0000562.

    Article  Google Scholar 

  • Huang, S. C. (2008). “Rubber concentrations on rheology of aged asphalt binders.” Journal of Materials in Civil Engineering, Vol. 20, No. 3, pp. 221–229, DOI: 10.1061/(ASCE)0899-1561(2008)20:3(221).

    Article  Google Scholar 

  • Hurley, G. C. and Prowell, B. D. (2005). Evaluation of Sasobit for use in warm mix asphalt, NCAT Report, 5(06), National Center for Asphalt Technology, Auburn, AL.

    Google Scholar 

  • Jamshidi, A., Golchin, B., Hamzah, M. O., and Turner, P. (2015). “Selection of type of warm mix asphalt additive based on the rheological properties of asphalt binders.” Journal of Cleaner Production, Vol. 100, pp. 89–106, DOI: 10.1016/j.jclepro.2015.03.036.

    Article  Google Scholar 

  • Jamshidi, A., Hamzah, M. O., and Aman, M. Y. (2012). “Effects of Sasobit® content on the rheological characteristics of unaged and aged asphalt binders at high and intermediate temperatures.” Materials Research, Vol. 15, No. 4, pp. 628–638, DOI: 10.1590/S1516-14392012005000083.

    Article  Google Scholar 

  • Julaganti, A., Choudhary, R., and Kumar, A. (2017). “Rheology of modified binders under varying doses of WMA additive–Sasobit.” Petroleum Science and Technology, Vol. 35, No. 10, pp. 975–982, DOI: 10.1080/10916466.2017.1297827.

    Article  Google Scholar 

  • Kakar, M. R., Hamzah, M. O., Akhtar, M. N., and Woodward, D. (2016). “Surface free energy and moisture susceptibility evaluation of asphalt binders modified with surfactant-based chemical additive.” Journal of Cleaner Production, Vol. 112, pp. 2342–2353, DOI: 10.1016/j.jclepro.2015.10.101.

    Article  Google Scholar 

  • Kim, H., Lee, S. J., and Amirkhanian, S. N. (2012). “Influence of warm mix additives on PMA mixture properties.” Journal of Transportation Engineering, Vol. 138, No. 8, pp. 991–997, DOI: 10.1061/(ASCE) TE.1943-5436.0000406.

    Article  Google Scholar 

  • Kim, H., Lee, S. J., Amirkhanian, S. N., and Jeong, K. D. (2013). “Quantification of oxidative aging of polymer-modified asphalt mixes made with warm mix technologies.” Journal of Materials in Civil Engineering, Vol. 25, No. 1, pp. 1–8, DOI: 10.1061/(ASCE) MT.1943-5533.0000479.

    Article  Google Scholar 

  • Kumar, A., Julaganti, A., Choudhary, R., and Porwal, S. S. (2016). “Evaluation of state-of-the art (SOA) warm mix asphalt with modified binders.” Journal of Indian Highways, Indian Roads Congress, Vol. 44, No. 12, pp. 23–31.

    Google Scholar 

  • Lamontagne, J., Dumas, P., Mouillet, V., and Kister, J. (2001). “Comparison by Fourier Transform Infrared (FTIR) spectroscopy of different ageing techniques: Application to road bitumens.” Fuel, Vol. 80, No. 4, pp. 483–488, DOI: 10.1016/S0016-2361(00)00121-6.

    Article  Google Scholar 

  • Lu, X. and Isacsson, U. (2002). “Effect of ageing on bitumen chemistry and rheology.” Construction and Building Materials, Vol. 16, No. 1, pp. 15–22, DOI: 10.1016/S0950-0618(01)00033-2.

    Article  Google Scholar 

  • Montgomery, D. C. and Runger, G. C. (2010). Applied statistics and probability for engineers, John Wiley & Sons, NJ, USA.

    MATH  Google Scholar 

  • Oliveira, J. R., Silva, H. M., Abreu, L. P., and Fernandes, S. R. (2013). “Use of a warm mix asphalt additive to reduce the production temperatures and to improve the performance of asphalt rubber mixtures.” Journal of Cleaner Production, Vol. 41, pp. 15–22, DOI: 10.1016/j.jclepro.2012.09.047.

    Article  Google Scholar 

  • Rajan, N. K., Selvavathi, V., Sairam, B., and Krishnan, J. M. (2010). “Influence of asphaltenes on the rheological properties of blended paving asphalts.” Petroleum Science and Technology, Vol. 28, No. 4, pp. 331–350, DOI: 10.1080/10916460802640282.

    Article  Google Scholar 

  • Read, J. and Whiteoak, D. (2003). The shell bitumen handbook, 5th ed., Thomas Telford, London, UK.

    Google Scholar 

  • Roja, K. L., Roy, N., and Krishnan, J. M. (2016). “Influence of aging on the rheological behavior of warm mix asphalt binders.” RILEM book series, Springer, Vol. 11, pp. 497–508, DOI: 10.1007/978-94-017-7342-3_40.

    Article  Google Scholar 

  • Rubio, M. C., Martínez, G., Baena, L., and Moreno, F. (2012). “Warm mix asphalt: An overview.” Journal of Cleaner Production, Vol. 24, pp. 76–84, DOI: 10.1016/j.jclepro.2011.11.053.

    Article  Google Scholar 

  • Sadeq, M., Masad, E., Al-Khalid, H., Sirin, O., and Little, D. (2016). “Rheological evaluation of short-and long-term performance for Warm Mix Asphalt (WMA) binders.” RILEM book series, springer, Vol. 11 pp. 129–139, DOI: 10.1007/978-94-017-7342-3_11.

    Article  Google Scholar 

  • Sasobit Product Information 124 (2006). The Bitumen additive for highly stable easily compactible Asphalts, http://rad.ae/site/images/downloads/brochure/Sasobit_brochure_E.pdf.

  • Vaitkus, A., Cygas, D., Laurinavicius, A., and Perveneckas, Z. (2009). “Analysis and evaluation of possibilities for the use of warm mix asphalt in Lithuania.” The Baltic Journal of Road and Bridge Engineering, Vol. 4, No. 2, pp. 80–86, DOI: 10.3846/1822-427X.2009.4.80-86.

    Article  Google Scholar 

  • Wasiuddin, N., Selvamohan, S., Zaman, M., and Guegan, M. (2007). “Comparative laboratory study of sasobit and aspha-min additives in warm-mix asphalt.” Journal of the Transportation Research Board, Transportation Research Record, Vol. 1998, pp. 82–88, DOI: 10.3141/1998-10.

    Article  Google Scholar 

  • Xiao, F., Amirkhanian, S. N., Karakouzian, M., and Khalili, M. (2015). “Rheology evaluations of WMA binders using ultraviolet and PAV aging procedures.” Construction and Building Materials, Vol. 79, pp. 56–64, DOI: 10.1016/j.conbuildmat.2015.01.046.

    Article  Google Scholar 

  • Yu, X., Wu, J., and Liu, Y. (2011). “The effects of aging on rheological and rutting properties of CRMAs containing warm asphalt additives.” The 2nd international warm-mix conference, Missouri, USA.

    Google Scholar 

  • Zhang, J., Chang, M., Pei, J., Xu, L., and Xu, S. (2015b). “Aging kinetics characteristics of warm mix asphalt binder using softening point and n-pentane asphaltene content as the parameters.” Journal of Testing and Evaluation, Vol. 44, No. 2, pp. 914–920, DOI: 10.1520/JTE20150142Che.

    Google Scholar 

  • Zhang, J., Liu, G., Xu, L., and Pei, J. (2015a). “Effects of WMA additive on the rheological properties of asphalt binder and high temperature performance grade.” Advances in Materials Science and Engineering, Vol. 2015, pp. 1–7, DOI: 10.1155/2015/467891.

    Google Scholar 

Download references

Author information

Authors and Affiliations

Authors

Corresponding author

Correspondence to Rajan Choudhary.

Rights and permissions

Reprints and permissions

About this article

Check for updates. Verify currency and authenticity via CrossMark

Cite this article

Julaganti, A., Choudhary, R. & Kumar, A. Permanent Deformation Characteristics of Warm Asphalt Binders under Reduced Aging Conditions. KSCE J Civ Eng 23, 160–172 (2019). https://doi.org/10.1007/s12205-017-1903-0

Download citation

  • Received:

  • Revised:

  • Accepted:

  • Published:

  • Issue Date:

  • DOI: https://doi.org/10.1007/s12205-017-1903-0

Keywords

Navigation