Abstract
This study investigated the magnitude and distribution of the earth pressure on the support system in a jointed rock mass, due to the different joint inclination angles, joint shear conditions, and rock types. The study mainly focused on the sensitivity of the joint inclination angles on the earth pressure. Based on a physical model test (Son and Park, 2014), extended numerical parametric studies were conducted considering rock-structure interactions based on the discrete element method, which can consider the rock and joint characteristics of rock mass. The results of numerical tests were compared with an analytical method based on a wedge theory. The comparison showed that the earth pressure was highly influenced by the joint inclination angles, together with different rock types. The study indicated that the effect of joint inclination angle was particularly more significant when a rock type was harder and a joint was under the condition of joint sliding. The test results were also compared with Peck’s earth pressure, which has been frequently used for soil ground. The comparison showed that the earth pressure in a jointed rock mass can be significantly different from that in soil ground depending on the joint inclination angles and rock types.
This is a preview of subscription content, log in via an institution to check access.
Similar content being viewed by others
References
Bjerrum, L., Frimann Clausen, C. J., and Duncan, J. M. (1972). “Earth pressure on flexible structures: A state-of-the-art-report.” Proc. 5th European Conf. Soil Mech., Madrid, 2, pp. 169–196.
Chae, Y. S. and Moon, I. (1997). Earth pressure on retaining wall by considering local soil condition. Korean Geotechnical Society’ 94 fall conference paper, pp. 129–138.
Coulomb, C. A. (1776). “Essai sur une application des regles des maximis et minimis a quelques problemes de statique relatifs a l’architecture.” Vol. 7. Paris: Mem Math Phys Acad Roy Sci par divers Savants.
Haahash, Y. M. A. and Whittle, A. J. (2002). “Mechanism of load transfer and arching for braced excavations in clay.” Journal of Geoteh. and Geoenviron. Eng., Vol. 128, No. 3, pp. 187–197, DOI: 10.1061/(ASCE)1090-0241(2002)128:3(187).
Itasca Consulting Group, Inc. (2004). Universal distinct element code, User’s Manual, Minneapolis, Minnesota, U.S.A
Jeong, E. T. and Kim, S. G. (1997). “Case study of earth pressure distribution on excavation wall of multi-layered soil.” Korean Geotechnical Society’ 97 spring conference paper, pp. 78–80.
Koo, J. K., Kim, W. K., Choi, J. H., You, Y. H., and Jeang, Y. K. (2004). “Study on soil properties and Earth pressure at domestic multilayer.” Hankyong National University Journal, Vol. 36, pp. 157–171.
Lambe, T. W. and Whitman, R. V. (1978). Soil mechanics, SIversion, John Wiley & Sons Inc., New York.
Laio, S. S. C. and Neff, T. L. (1990). “Estimating lateral earth pressure for design of excavation support.” Proceedings, Design and Performance of earth retaining structures, ASCE special conference, Ithaca, New York, pp. 489–509.
Peck, R. B. (1969). “Deep excavations and tunneling in soft ground. State-of-the-Art report.” Proceedings of the 7th International Conference on Soil Mechanics and Foundation Engineering, Mexico City, State-of-the Art Volume, pp. 225–290.
Potts, D. M. and Fourie, A. B. (1986). “A numerical study of the effect of wall deformation on earth pressures.” Intern. Journal of Numerical Ana. Methods in Geomech., Vol. 10, No. 4, pp. 383–405, DOI: 10.1002/nag.1610100404.
Prakash, S. and Saran, S. (1966). “Static and dynamic earth pressures behind retaining walls.” Proc., 3rd Symposium on Earthquake Engineering, University of Roorkee, Roorkee, Vol. 1, pp. 277–288.
Son, M. (2013). “Earth pressure on the support system in jointed rock mass.” Canadian Geotech. Journal, Vol. 50, No. 5, pp. 493–502, DOI: 10.1139/cgj-2012-0147.
Son, M. and Park, J. (2014). “Physical model test and numerical simulation of excavation walls in jointed rock masses.” Canadian Geotech. Journal, Vol. 51, No. 5, pp. 554–569, DOI: 10.1139/cgj-2013-0081.
Son, M. and Yoon, C. (2011). “Characteristics of the earth pressure magnitude and distribution in a jointed rockmass.” Journal of the Korean Society of Civil Engineer, Vol. 31, No. 6, pp. 203–212.
Tschebotarioff, G. P. (1973). Foundations, Retaining and Earth Structures, 2nd Ed., MGH.
Wong, I. H., Poh, T. Y., and Chuah, H. L. (1997). “Performance of excavations for depressed expressway in Singapore.” Journal of Geoteh. and Geoenviron. Eng., Vol. 123, No. 7, pp. 617–625, DOI: 10.1061/(ASCE)1090-0241(1997)123:7(617)).
Worden, F. T. and Achmus, M. (2013). “Numerical modeling of threedimensional active earth pressure acting on rigid walls.” Computer and Geotechnics, Vol. 51, pp. 83–90, DOI: 10.1016/j.compgeo.2013.02.004.
Yoo, C. S. and Kim, Y. J. (2000). “Deep excavation in soil, including rock with layers on retaining wall and apparent horizontal displacement of earth pressure.” Journal of Korean Geotechnical Society, Vol. 16, No. 4, pp. 43–45.
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Son, M., Adedokun, S. Effect of joint inclination angles on the earth pressure against the support system in a jointed rock mass. KSCE J Civ Eng 20, 1259–1266 (2016). https://doi.org/10.1007/s12205-015-0487-9
Received:
Revised:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s12205-015-0487-9