Abstract
A study on the development of an effective composition of polymeric antifouling coating based on acrylic copolymer with microencapsulated extract of natural origin and superdispersed polytetrafluoroethylene was carried out. A Raman spectroscopy study of the bacterial extract composition showed that the main component was a polyene pigment with 5 conjugated bonds. Encapsulation of ethyl acetate extract of Pseudoalteromonas piscicida 2202 was carried out, two types of microcapsules containing the microbial extract were obtained, and their morphology and efficiency of antifouling action in the coating were studied. Comprehensive studies of antifouling, anticorrosion, and mechanical properties of the coatings allowed identification of the most effective composition providing long-term protection in combination with satisfactory mechanical properties. It is shown that the use of silica nanocapsules with microbial extract in the coating is more effective for enhanced antifouling and mechanical performance.
Graphical Abstract
Similar content being viewed by others
References
Nir, S, Reches, M, “Bio-inspired Antifouling Approaches: the Quest Towards Non-Toxic and Non-Biocidal Materials.” Curr. Opinion Biotechnol., 39 48–55 (2016)
Almeida, JR, Vasconcelos, V, “Natural Antifouling Compounds: Effectiveness in Preventing Invertebrate Settlement and Adhesion.” Biotechnol. Adv., 33 343–357 (2015)
Tian, L, Yin, Y, Jin, H, Bing, W, Jin, E, Zhao, J, Ren, L, “Novel Marine Antifouling Coatings Inspired by Corals.” Mater. Today Chem., 17 100294 (2020)
Qian, P-Y, Xu, Y, Fusetani, N, “Natural Products as Antifouling Compounds: Recent Progress and Future Perspectives.” Biofouling, 26 223–234 (2010)
Qian, P-Y, Li, Z, Xu, Y, Li, Y, Fusetani, N, “Mini-Review: Marine Natural Products and Their Synthetic Analogs as Antifouling Compounds: 2009–2014.” Biofouling, 31 101–122 (2015)
Wang, K-L, Wu, Z-H, Wang, Y, Wang, C-Y, Xu, Y, “Mini-Review: Antifouling Natural Products from Marine Microorganisms and Their Synthetic Analogs.” Marine Drugs, 15 266 (2017)
Xu, Y, He, HP, Schulz, S, Liu, X, Fusetani, N, Xiong, HR, Xiao, X, Qian, PY, “Potent Antifouling Compounds Produced by Marine Streptomyces.” Bioresour. Technol., 101 1331–1336 (2010)
Newby, BZ, Cutright, T, Barrios, CA, Xu, Q, “Zosteric Acid—An Effective Antifoulant for Reducing Fresh Water Bacterial Attachment on Coatings.” J. Coat. Technol. Res., 3 69–70 (2006)
Mokrini, R, Ben Mesaoud, M, Daoudi, M, Hellio, C, Maréchal, JP, El Hattab, M, Ortalo-Magné, A, Piovetti, L, Culioli, G, “Meroditerpenoids and Derivatives from the Brown Alga Cystoseira baccata and Their Antifouling Properties.” J. Nat. Prod., 71 1806–1811 (2008)
Melander, C, Moeller, PDR, Ballard, TE, Richards, JJ, Huigens, RW, Cavanagh, J, “Evaluation of Dihydrooroidin as an Antifouling Additive in Marine Paint.” Int. Biodeter. Biodegrad., 63 529–532 (2009)
Ong, G, Kasi, R, Subramaniam, R, “A Review on Plant Extracts as Natural Additives in Coating Applications.” Prog. Org. Coat., 151 106091 (2021)
Angarano, MB, McMahon, RF, Hawkins, DL, Schetz, JA, “Exploration of Structure-Antifouling Relationships of Capsaicin-like Compounds that Inhibit Zebra Mussel (Dreissena polymorpha) Macrofouling.” Biofouling, 23 295–305 (2007)
Perez, M, Garcia, M, Blustein, G, Stupak, M, “Tannin and Tannate from the Quebracho Tree: an Eco-Friendly Alternative for Controlling Marine Biofouling.” Biofouling, 23 151–159 (2007)
Xu, Y, He, H, Schul, ZS, Liu, X, Fusetani, N, Xiong, X, Xiao, X, Qian, P-Y, “Potent Antifouling Compounds Produced by Marine Streptomyces.” Bioresour. Technol., 101 1331–1336 (2010)
Chen, L, Xia, C, Qian, P-Y, “Optimization of Antifouling Coatings Incorporating Butenolide, a Potent Antifouling Agent via Field and Laboratory Tests.” Prog. Org. Coat., 109 22–29 (2017)
Lejars, M, Margaillan, A, Bressy, C, “Fouling Release Coatings: a Nontoxic Alternative to Biocidal Antifouling Coatings.” Chem. Rev., 112 4347–4390 (2012)
Nurioglu, AG, Esteves, ACC, de With, G, “Non-toxic, Non-Biocide-Release Antifouling Coatings Based on Molecular Structure Design for Marine Applications.” J. Mater. Chem. B, 3 6547–6570 (2015)
Chambers, LD, Stokes, KP, Walsh, FC, Wood, RJK, “Modern Approaches to Marine Antifouling Coatings.” Surf. Coat. Technol., 201 3642–3652 (2006)
Yebra, DM, Kiil, S, Dam-Johansen, K, “Antifouling Technology – Past, Present and Future Steps Towards Efficient and Environmentally Friendly Antifouling Coatings.” Prog. Org. Coat., 50 75–104 (2004)
Silva, ER, Ferreira, O, Ramalho, PA, Azevedo, NF, Bayon, R, Igartua, A, Bordado, JC, Calhorda, MJ, “Eco-Friendly Non-Biocide-Release Coatings for Marine Biofouling Prevention.” Sci. Total Environ., 650 2499–2511 (2019)
Xie, QY, Pan, JS, Ma, CF, Zhang, GZ, “Dynamic Surface Antifouling: Mechanism and Systems.” Soft Matter, 15 1087–1107 (2019)
Selim, MS, El-Safty, SA, Shenashen, MA, Higazy, SA, Elmarakbi, A, “Progress in Biomimetic Leverages for Marine Antifouling by Nanocomposite Coatings.” J. Mater. Chem. B, 8 15 (2020)
Chen, L, Duan, Y, Cui, M, Huang, R, Su, R, Qi, W, He, Z, “Biomimetic Surface Coatings for Marine Antifouling: Natural Antifoulants, Synthetic Polymers and Surface Microtopography.” Sci. Total Environ., 766 144469 (2021)
Chasse, KR, Scardino, AJ, Swain, GW, “Corrosion and Fouling Study of Copper-Based Antifouling Coatings on 5083 Aluminum Alloy.” Prog. Org. Coat., 141 105555 (2020)
Kharchenko, U, Beleneva, I, Karpov, V, “Antifouling and Anticorrosion Potential of Pseudoalteromonas piscicida Extract.” J. Coat. Technol. Res., 17 887–896 (2020)
Kharchenko, U, Zemnukhova, L, Yarusova, S, Beleneva, I, Egorkin, V,Vyaliy, I, Hung, N, Karpov, V, Sinebryukhov, S, Gnedenkov S, “Use of Silicate By-Products in Water Treatment Processes and Development of Eco-Friendly Self-Polishing Antifouling Coatings.” Int. J. Environ. Sci. Technol., https://doi.org/10.1007/s13762-021-03557-y (2021)
Egorkin, VS, Gnedenkov, SV, Sinebryukhov, SL, Vyaliy, IE, Gnedenkov, AS, Chizhikov, RG, “Increasing Thickness and Protective Properties of PEO-Coatings on Aluminum Alloy.” Surf. Coat. Technol., 334 29–42 (2017)
Ruggiero, L, Crociani, L, Zendri, E, El Habra, N, Guerriero, P, “Incorporation of the Zosteric Sodium Salt in Silica Nanocapsules: Synthesis and Characterization of New Fillers for Antifouling Coatings.” Appl. Surface Sci., 439 705–711 (2018)
Ruggiero, L, Bartoli, F, Fidanza, MR, Zurlo, F, Marconi, E, Gasperi, T, Tuti, S, Crociani, L, Di Bartolomeo, E, Caneva, G, Ricci, MA, Sodo, A, “Encapsulation of Environmentally-Friendly Biocides in Silica Nanosystems for Multifunctional Coatings.” Appl. Surface Sci., 514 145908 (2020)
Raman, NK, Anderson, MT, Brinker, CJ, “Template-based Approaches to the Preparation of Amorphous, Nanoporous Silicas.” Chem. Mater., 8 1682–1701 (1996)
Maia, F, Silva, AP, Fernandes, S, Cunha, A, Almeida, A, Tedim, J, Zheludkevich, ML, Ferreira, MGS, “Incorporation of Biocides in Nanocapsules for Protective Coatings used in Maritime Applications.” Chem. Eng. J., 270 150–157 (2015)
Maia, F, Tedim, J, Lisenkov, AD, Salak, AN, Zheludkevich, ML, Ferreira, MGS, “Silica Nanocontainers for Active Corrosion Protection.” Nanoscale, 4 1287–1298 (2012)
Mirabedini, SM, Esfandeh, M, Farnood, RR, Rajabi, P, “Amino-silane Surface Modification of Urea-Formaldehyde Microcapsules Containing Linseed Oil for Improved Epoxy Matrix Compatibility. Part I: Optimizing Silane Treatment Conditions.” Prog. Org. Coat., 136 105242 (2019)
Szabó, T, Molnár-Nagy, L, Bognár, J, Nyikos, L, Telegdi, J, “Self-Healing Microcapsules and Slow Release Microspheres in Paints.” Prog. Org. Coat., 72 52–57 (2011)
Zotiadis, C, Patrikalos, I, Loukaidou, V, Korres, DM, Karantonis, A, Vouyiouka, S, “Self-Healing Coatings Based on Poly(urea-formaldehyde) Microcapsules: In Situ Polymerization, Capsule Properties and Application.” Prog. Org. Coat., 161 106475 (2021)
Li, H, Ma, Y, Li, Z, Cui, Y, Wang, H, “Synthesis of Novel Multilayer Composite Microcapsules and Their Application in Self-Lubricating Polymer Composites.” Compos. Sci. Technol., 164 120–128 (2018)
ASTM G59–97 Standard Test Method for Conducting Potentiodynamic Polarization Resistance Measurements ASTM International, West Conshohocken, PA (2009)
Shi, Z, Liu, M, Atrens, A, “Measurement of the Corrosion Rate of Magnesium Alloys Using Tafel Extrapolation.” Corros. Sci., 52 579–588 (2010)
Shi, Z, Atrens, A, “An Innovative Specimen Configuration for the Study of Mg Corrosion.” Corros. Sci., 53 226–246 (2011)
Cao, F, Shi, Z, Hofstetter, J, Uggowitzed, PJ, Song, G, Liu, M, Atrens, A, “Corrosion of Ultra-High-Purity Mg in 3.5% NaCl Solution Saturated with Mg(OH)2.” Corros. Sci., 75 78–99 (2013)
Wang, D, Xu, J, Yang, J, Zhou, S, “Preparation and Synergistic Antifouling Effect of Self-Renewable Coatings Containing Quaternary Ammonium-Functionalized SiO2 Nanoparticles.” J. Colloid Interface Sci., 563 261–271 (2020)
Schaffer, HE, Chance, RR, Silbey, RJ, Knoll, K, Schrock, RR, “Conjugation Length Dependence of Raman Scattering in a Series of Linear Polyenes: Implications for Polyacetylene.” J. Chem. Phys., 94 4161 (1991)
Fernandes, RF, Maia, LF, Couri, MRC, Costa, LAS, de Oliveira, LFC, “Raman Spectroscopy as a Tool in Differentiating Conjugated Polyenes from Synthetic and Natural Sources.” Spectrochimica Acta Part A: Mol. Biomol. Spectrosc., 134 434–441 (2015)
Miyaoka, R, Hosokawa, M, Ando, M, Mori, T, Hamaguchi, H, Takeyama, H, “In Situ Detection of Antibiotic Amphotericin B Produced in Streptomyces nodosus using Raman Microspectroscopy.” Mar. Drugs, 12 2827–2839 (2014)
Duan, H, Yan, C, Wang, F, “Effect of Electrolyte Additives on Performance of Plasma Electrolytic Oxidation Films Formed on Magnesium Alloy AZ91D.” Electrochim. Acta, 52 3785–3793 (2007)
Yebra, DM, Kiil, S, Dam-Johansen, K, Weinell, C, “Reaction Rate Estimation of Controlled-Release Antifouling Paint Binders: Rosin-Based Systems.” Prog. Org. Coat., 53 256–275 (2005)
Bressy, C, Margaillan, A, Faÿ, F, Linossier, I, Réhel, K, “Tin-free Self-Polishing Marine Antifouling Coatings.” In: Hellio, C, Yebra, D (eds.) Advances in Marine Antifouling Coatings and Technologies, pp. 445–491. Woodhead Publishing, UK (2009)
Leyland, A, Matthews, A, “On the Significance of the H/E Ratio in Wear Control: A Nanocomposite Coating Approach to Optimized Tribological Behavior.” Wear, 246 1–11 (2000)
Kavouras, P, Trompeta, AF, Larroze, S, Maranhão, M, Teixeira, T, Beltri, M, Koumoulos, EP, Charitidis, CA, “Correlation of Mechanical Properties with Antifouling Efficacy of Coatings Containing Loaded Microcapsules.” Prog. Org. Coat., 136 105249 (2019)
Monfared, H, Sharif, F, “Design Guidelines for Development of Tin-Free Antifouling Self-Polishing Coatings Using Simulation.” Prog. Org. Coat., 63 79–86 (2008)
Behzadnasab, M, Esfandeh, M, Mirabedini, SM, Zohuriaan-Mehr, MJ, Farnood, RR, “Preparation and Characterization of Linseed Oil-Filled Urea–Formaldehyde Microcapsules and Their Effect on Mechanical Properties of an Epoxy-Based Coating.” Colloids Surf. A: Physicochem. Eng. Aspects, 457 16–26 (2014)
Li, H, Ma, Y, Li, Z, Cui, Y, Wang, H, “Synthesis of Novel Multilayer Composite Microcapsules and Their Application in Self-Lubricating Polymer Composites.” Compos. Sci. Technol., 164 120–128 (2018)
Mashlyakovskii, LN, Koz’mina, NS, Egorova, NA, Khomko, EV, “Epoxy Coatings with Low Surface Energy from Powdered Compounds Modified with Finely Dispersed Polytetrafluoroethylene Particles.” Russian J. Appl. Chem., 91 629–640 (2018)
Acknowledgments
The authors wish to thank colleagues from the Joint Vietnam-Russia Tropical Science and Technology Research Center in Nha Trang (Vietnam) for invaluable assistance during field experiments.
Funding
The work was financially supported by the RFBR, project number 19–29–13020. The work was also performed as part of the research project Ecolan T-1.2, task 1 on “Full-scale tests of modern structural materials, steels, welded joints and protective equipment for resistance to marine corrosion and fouling” and Ecolan T-1.4 “Development of physico-chemical approaches to the formation of effective coatings with antifouling properties based on biologically active metabolites of marine microorganisms.”
Author information
Authors and Affiliations
Contributions
All authors contributed to the study conception and design. Material preparation, data collection, and analysis were performed by Uliana Kharchenko, Irina Beleneva, Nikolay Izotov, Igor Vyaliy, and Alexander Karpenko. Funding acquisition was performed by Nguen Van Chi. Alexander Tsvetnikov provided materials for the study and Vladimir Egorkin supervised the overall investigation. The first draft of the manuscript was written by Uliana Kharchenko and all authors commented on previous versions of the manuscript. All authors read and approved the final manuscript.
Corresponding author
Ethics declarations
Conflict of interest
The authors have no competing interests to declare that are relevant to the content of this article.
Additional information
Publisher's Note
Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.
Rights and permissions
Springer Nature or its licensor holds exclusive rights to this article under a publishing agreement with the author(s) or other rightsholder(s); author self-archiving of the accepted manuscript version of this article is solely governed by the terms of such publishing agreement and applicable law.
About this article
Cite this article
Kharchenko, U., Beleneva, I., Egorkin, V. et al. Preparation of PEO/polymer coatings on aluminum alloy with antifouling properties. J Coat Technol Res 20, 763–779 (2023). https://doi.org/10.1007/s11998-022-00706-x
Received:
Revised:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s11998-022-00706-x