Abstract
This paper presents the effect on compressive strength and self-healing capability of bacterial concrete with the addition of calcium lactate. Compared to normal concrete, bacterial concrete possesses higher durability and engineering concrete properties. The production of calcium carbonate in bacterial concrete is limited to the calcium content in cement. Hence calcium lactate is externally added to be an additional source of calcium in the concrete. The influence of this addition on compressive strength, self-healing capability of cracks is highlighted in this study. The bacterium used in the study is bacillus subtilis and was added to both spore powder form and culture form to the concrete. Bacillus subtilis spore powder of 2 million cfu/g concentration with 0.5% cement was mixed to concrete. Calcium lactates with concentrations of 0.5%, 1.0%, 1.5%, 2.0%, and 2.5% of cement, was added to the concrete mixes to test the effect on properties of concrete. In other samples, cultured bacillus subtilis with a concentration of 1×105 cells/mL was mixed with concrete, to study the effect of bacteria in the cultured form on the properties of concrete. Cubes of 100 mm×100 mm×100 mm were used for the study. These cubes were tested after a curing period of 7, 14 and 28 d. A maximum of 12% increase in compressive strength was observed with the addition of 0.5% of calcium lactate in concrete. Scanning electron microscope and energy dispersive X-ray spectroscopy examination showed the formation of ettringite in pores; calcium silicate hydrates and calcite which made the concrete denser. A statistical technique was applied to analyze the experimental data of the compressive strengths of cementations materials. Response surface methodology was adopted for optimizing the experimental data. The regression equation was yielded by the application of response surface methodology relating response variables to input parameters. This method aids in predicting the experimental results accurately with an acceptable range of error. Findings of this investigation indicated the influence of added calcium lactate in bio-concrete which is quite impressive for improving the compressive strength and self-healing properties of concrete.
Similar content being viewed by others
References
Muhammad N Z, Keyvanfar A, Majid M Z A, Shafaghat A, Mirza J. Waterproof performance of concrete: A critical review on implemented approaches. Construction & Building Materials, 2015, 101: 80–90
Rapoport J, Aldea C M, Shah S P, Ankenman B, Karr A. Permeability of cracked steel fiber-reinforced concrete. Journal of Materials in Civil Engineering, 2002, 14(4): 355–358
Jonkers H, Schlangen E. Development of a bacteria-based self healing concrete. In: Walraven J C, Stoelhorst D, eds. Tailor Made Concrete Structures. London: CRC Press, 2008, 109
De Muynck W, De Belie N, Verstraete W. Microbial carbonate precipitation in construction materials: A review. Ecological Engineering, 2010, 36(2): 118–136
Andalib R, Majid M Z A, Hussin M W, Ponraj M, Keyvanfar A, Mirza J, Lee H S. Optimum concentration of Bacillus megaterium for strengthening structural concrete. Construction & Building Materials, 2016, 118: 180–193
Luo M, Qian C X, Li R Y. Factors affecting crack repairing capacity of bacteria-based self-healing concrete. Construction & Building Materials, 2015, 87: 1–7
Siddique R, Nanda V, Kunal E H, Kadri M, Iqbal Khan M, Singh M, Rajor A. Influence of bacteria on compressive strength and permeation properties of concrete made with cement baghouse filter dust. Construction & Building Materials, 2016, 106: 461–469
De Muynck W, Cox K, De Belie N, Verstraete W. Bacterial carbonate precipitation as an alternative surface treatment for concrete. Construction & Building Materials, 2008, 22(5): 875–885
Talaiekhozani A, Keyvanfar A, Andalib R, Samadi M, Shafaghat A, Kamyab H, Majid M Z A, Zin R M, Fulazzaky M A, Lee C T, Hussin M W. Application of Proteus mirabilis and Proteus vulgaris mixture to design self-healing concrete. Desalination and Water Treatment, 2014, 52(19–21): 3623–3630
Jonkers H M, Schlangen E. A two component bacteria-based selfhealing concrete. Cultures, 2009, 215–220
Siddique R, Chahal N K. Effect of ureolytic bacteria on concrete properties. Construction & Building Materials, 2011, 25(10): 3791–3801
Sangadji S, Wiktor V, Jonkers H, Schlangen E. Injecting a liquid bacteria-based repair system to make porous network concrete healed. In: Proceedings of the 4th International Conference on Self- Healing Materials. Ghent, 2013, 118–122
Wiktor V, Jonkers H M. Case studies in construction materials field performance of bacteria-based repair system: Pilot study in a parking garage. Case Studies in Construction Materials, 2015, 2: 11–17
Jonkers H M, Thijssen A, Muyzer G, Copuroglu O, Schlangen E. Application of bacteria as self-healing agent for the development of sustainable concrete. Ecological Engineering, 2010, 36(2): 230–235
Bang S S, Galinat J K, Ramakrishnan V. Calcite precipitation induced by polyurethane-immobilized Bacillus pasteurii. Enzyme and Microbial Technology, 2001, 28(4–5): 404–409
Vijay K, Murmu M, Deo S V. Bacteria based self healing concrete—A review. Construction & Building Materials, 2017, 152: 1008–1014
BIS. 8112, Indian Standard 43 Grade Ordinary Portland Cement—- Specification, Bureau of Indian Standards. 1989
BIS. 383, Specifications for Coarse and Fine Aggregates from Natural Sources for Concrete. 1970
Khaliq W, Ehsan M B. Crack healing in concrete using various bio influenced self-healing techniques. Construction & Building Materials, 2016, 102: 349–357
BIS. 10262, Guidelines for Concrete Mix Design Proportioning, Bureau of Indian Standards. 2009
Alsanusi S, Bentaher L. Prediction of compressive strength of concrete from early age test result using design experiments (RSM). World Academy of Science, Engineering and Technology International Journal of Civil and Environmental Engineering, 2011, 9(12): 978–984
Vu-Bac N, Silani M, Lahmer T, Zhuang X, Rabczuk T. A unified framework for stochastic predictions of mechanical properties of polymeric nanocomposites. Computational Materials Science, 2015, 96(Part B): 520–535
Vu-Bac N, Rafiee R, Zhuang X, Lahmer T, Rabczuk T. Uncertainty quantification formultiscale modeling of polymer nanocomposites with correlated parameters. Composites. Part B, Engineering, 2015, 68: 446–464
Vu-Bac N, Lahmer T, Zhuang X, Nguyen-Thoi T, Rabczuk T. A software framework forprobabilistic sensitivity analysis for computationally expensive models. Advances in Engineering Software, 2016, 100: 19–31
Vu-Bac N, Lahmer T, Keitel H, Zhao J, Zhuang X, Rabczuk T. Stochastic predictions of bulk properties of amorphous polyethylene based on molecular dynamics simulations. Mechanics of Materials, 2014, 68, 70–84
Vu-Bac N, Lahmer T, Zhang Y, Zhuang X, Rabczuk T. Stochastic predictions of interfacial characteristic of polymeric nanocomposites (PNCs). Composites. Part B, Engineering, 2014, 59: 80–95
Badawy M F, Msekh M A, Hamdia K M, Steiner M K, Lahmer T, Rabczuk T. Hybrid nonlinear surrogate models for fracture behavior of polymeric nanocomposites. Probabilistic Engineering Mechanics, 2017, 50: 64–75
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Vijay, K., Murmu, M. Effect of calcium lactate on compressive strength and self-healing of cracks in microbial concrete. Front. Struct. Civ. Eng. 13, 515–525 (2019). https://doi.org/10.1007/s11709-018-0494-2
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s11709-018-0494-2