Skip to main content
SpringerLink
Log in

Core designing of a new type of TVS-2M FAs: neutronics and thermal-hydraulics design basis limits

  • Research Article
  • Published:
Frontiers in Energy Aims and scope Submit manuscript

Abstract

One of the most important aims of this study is to improve the core of the current VVER reactors to achieve more burn-up (or more cycle length) and more intrinsic safety. It is an independent study on the Russian new proposed FAs, called TVS-2M, which would be applied for the future advanced VVERs. Some important aspects of neutronics as well as thermal hydraulics investigations (and analysis) of the new type of Fas are conducted, and results are compared with the standards PWR CDBL. The TVS-2M FA contains gadolinium-oxide which is mixed with UO2 (for different Gd densities and U-235 enrichments which are given herein), but the core does not contain BARs. The new type TVS-2M Fas are modeled by the SARCS software package to find the PMAXS format for three states of CZP and HZP as well as HFP, and then the whole core is simulated by the PARCS code to investigate transient conditions. In addition, the WIMS-D5 code is suggested for steady core modeling including TVS-2M FAs and/or TVS FAs. Many neutronics aspects such as the first cycle length (first cycle burn up in terms of MWthd/kgU), the critical concentration of boric acid at the BOC as well as the cycle length, the axial, and radial power peaking factors, differential and integral worthy of the most reactive CPS-CRs, reactivity coefficients of the fuel, moderator, boric acid, and the under-moderation estimation of the core are conducted and benchmarked with the PWR CDBL. Specifically, the burn-up calculations indicate that the 45.6 d increase of the first cycle length (which corresponds to 1.18 MWthd/kgU increase of burnup) is the best improving aim of the new FA type called TVS-2M. Moreover, thermal-hydraulics core design criteria such as MDNBR (based on W3 correlation) and the maximum of fuel and clad temperatures (radially and axially), are investigated, and discussed based on the CDBL.

This is a preview of subscription content, log in via an institution to check access.

Access this article

Log in via an institution

Price excludes VAT (USA)
Tax calculation will be finalised during checkout.

Instant access to the full article PDF.

Institutional subscriptions

Similar content being viewed by others

References

  1. Bibilashvili Yu K, Kuleshov A V, Mikheev E N, et al. Investigation of thermal-physical and mechanical properties of uranium-gadolinium oxide fuel. In: Proceedings of IAEA Technical Committee Meeting on Improved Fuel Pellet Materials and Designs. Brussels, Belgium, 2003, 85–100

    Google Scholar 

  2. Une K. Thermal expansion of UO2-Gd2O3 fuel pellets. Journal of Nuclear Science and Technology, 1986, 23(11): 1020–1022

    Article  Google Scholar 

  3. Lysikov A V, Kouleshova V, Novikova E A. Results of thermalphysical and mechanical property investigations of modified uranium-gadolinium oxide doped fuel. In: Russian Scientific Conference Materials for Nuclear Technics. Zvenigorod, Russia, 2007, 22–44

    Google Scholar 

  4. Nivikov V, Dolgov A, Molchanov V. In: TopFUEL Conference. Wurzburg, Germany, 2003

    Google Scholar 

  5. Kosourov E, Oleksuk D, Pavlovichev A, Shecherenko A. Optimization of gadolinium distribution in FAs for WWER-1000. In: 10th International Conference on WWER Performance, Modelling and Experimental Support. Sandanski, Bulgaria, 2013

    Google Scholar 

  6. Oka Y, Madarame H, Uesaka M. An advanced course in nuclear engineering: nuclear reactor design. Japan: Springer Press, 2014

    Book  Google Scholar 

  7. Porhemmat M H, Hadad K, Faghihi F. PARCS cross-section library generator; part one: development and verification. Progress in Nuclear Energy, 2015, 78: 155–162

    Article  Google Scholar 

  8. Safaei Arshi S, Mirvakili S M, Faghihi F. Modified COBRA-EN code to investigate thermal-hydraulics analysis of the Iranian VVER-1000 core. Progress in Nuclear Energy, 2010, 52(6): 589–595

    Article  Google Scholar 

  9. Lunin G L, Novikov A N, Pavlov V I, Pavlovichev A M. Development of four-year fuel cycle based on the advanced fuel assembly with uranium-gadolinium fuel and it simple mentation to the operating VVER-1000 units. In: Proceeding of the 10th Symposium of AER. Moscow, Russia, 2000, 1:75–95

    Google Scholar 

  10. Amin Mozafari M, Faghihi F. Design of annular fuels for a typical VVER-1000 core: neutronic investigation, pitch optimization and MDNBR calculation. Annals of Nuclear Energy, 2013, 60: 226–234

    Article  Google Scholar 

  11. Mirvakili S M, Faghihi F, Khalafi H. Developing a computational tool for predicting physical parameters of a typical VVER-1000 core based on artificial neural network. Annals of Nuclear Energy, 2012, 50: 82–93

    Article  Google Scholar 

  12. Bagheri S, Faghihi F, Nematollahi M R, Behzadinejad B. Assessment of thermal hydraulics parameters of the VVER-1000 during transient conditions. International Journal of Hydrogen Energy, 2016, 41(17): 7103–7111

    Article  Google Scholar 

  13. Lamarsh J R. Introduction to Nuclear Reactor Theory. New York University: Addison Wesley Publishing Company, 1966

    Google Scholar 

  14. Tong L S, Weisman J. Thermal Analysis of Pressurized Water Reactors. United States Department of Energy, Office of Scientific and Technical Information, OSTI Identifier: 5856843, 1979

    Google Scholar 

  15. Novikov V V, Mikheev E N, Lysikov A V, et al. Property investigations of (U,Gd)O2 fuel with higher content of gadolinium oxide. https://doi.org/www.iaea.org/inis/collection/NCLCollectionStore/_Public/41/081/41081142.pdf

  16. Balestrieri D. A study of the UO2/Gd2O3 composite fuel, IAEA Series. https://doi.org/inis.iaea.org/search/search.aspx?orig_q=RN:290547-47

  17. Todreas N E, Kazimi M S. Nuclear Systems I: Thermal Hydraulics Fundamentals. CRC Press, 2001

    Google Scholar 

  18. Faghihi F, Fadaie A H, Sayareh R. Reactivity coefficients simulation of the Iranian VVER-1000 nuclear reactor using WIMS and CITATION codes. Progress in Nuclear Energy, 2007, 49(1): 68–78

    Article  Google Scholar 

  19. Downar T, Xu Y, Seker V, et al. PARCS v2.7 US NRC Core Neutronics Simulator User Manual. Purdue University, West Lafayette, Ind, USA, 2006

    Google Scholar 

  20. Downar T, Xu Y, Seker V, et al. PARCS v3 US NRC Core Neutronics Simulator User Manual. University of Michigan, Ann Arbor, MI, USA, 2010

    Google Scholar 

  21. Lunin G, Novikov A, Pavlov V, et al. Advanced fuel cycles of VVER-1000 reactors. In: 8th International Conference on WWER Fuel Performance, Modelling and Experimental Support. Helena Resort near Burgas, Bulgaria, 2003

    Google Scholar 

  22. Atomic Energy Organization of Iran. Album of Neutron and Physical Characteristics of the 1st Loading of Boushehr Nuclear Power Plant. BNPP FSAR, 2003

    Google Scholar 

  23. Faghihi F, Saidi nezhad M. Two safety coefficients for a typical 13 × 13 annular fuel assembly. Progress in Nuclear Energy, 2011, 53 (3): 250–254

    Article  Google Scholar 

  24. Erfani Nia A, Faghihi F, Hadad K. Prompt and power reactivity coefficients for the next generation VVER-1000 reactor including hexagonal assemblies and annular fuels. Progress in Nuclear Energy, 2012, 61: 41–47

    Article  Google Scholar 

  25. Driscoll M J, Downar T J, Pilat E E. The Linear Reactivity Model for Nuclear Fuel Management. La Grange Park, Illinois: American Nuclear Society, 1990

    Google Scholar 

Download references

Acknowledgements

Sincere thanks are due to the Shiraz University Research Council for his financial support. Authors are thankful the manager of Shiraz University High Speed Computer Center for their time and efforts during past 4 years ago.

Author information

Authors and Affiliations

  1. Department of Nuclear Engineering, School of Mechanical Engineering, Shiraz University, Shiraz, 71936-16548, Iran

    Saeed Ghaemi & Farshad Faghihi

  2. Radiation Research Center, Shiraz University, Shiraz, 71936, Iran

    Farshad Faghihi

  3. Lonizing and Non-lonizing Radiation Center, Shiraz University of Medical Science, Shiraz, Iran

    Farshad Faghihi

Authors
  1. Saeed Ghaemi
    View author publications

    You can also search for this author in PubMed Google Scholar

  2. Farshad Faghihi
    View author publications

    You can also search for this author in PubMed Google Scholar

Corresponding author

Correspondence to Farshad Faghihi.

Rights and permissions

Reprints and permissions

About this article

Check for updates. Verify currency and authenticity via CrossMark

Cite this article

Ghaemi, S., Faghihi, F. Core designing of a new type of TVS-2M FAs: neutronics and thermal-hydraulics design basis limits. Front. Energy 15, 256–278 (2021). https://doi.org/10.1007/s11708-018-0583-x

Download citation

  • Received:

  • Accepted:

  • Published:

  • Issue Date:

  • DOI: https://doi.org/10.1007/s11708-018-0583-x

Keywords

Search

Navigation