Abstract
Pre-operative simulated practice allows trainees to learn robotic surgery outside the operating room without risking patient safety. While simulation practice has shown efficacy, simulators are expensive and frequently inaccessible. Cruff (J Surg Educ 78(2): 379–381, 2021) described a low-cost simulation model to learn hand movements for robotic surgery. Our study evaluates whether practice with low-cost home simulation models can improve trainee performance on robotic surgery simulators. Home simulation kits were adapted from those described by Cruff (J Surg Educ 78(2): 379–381, 2021). Hand controllers were modified to mimic the master tool manipulators (MTMs) on the da Vinci Skills Simulator (dVSS). Medical students completed two da Vinci exercises: Sea Spikes 1 (SS1) and Big Dipper Needle Driving (BDND). They were subsequently assigned to either receive a home simulation kit or not. Students returned two weeks later and repeated SS1 and BDND. Overall score, economy of motion, time to completion, and penalty subtotal were collected, and analyses of covariance were performed. Semi-structured interviews assessed student perceptions of the robotic simulation experience. Thirty-three medical students entered the study. Twenty-nine completed both sessions. The difference in score improvement between the experimental and control groups was not significant. In interviews, students provided suggestions to increase fidelity and usefulness of low-cost robotic home simulation. Low-cost home simulation models did not improve student performance on dVSS after two weeks of at-home practice. Interview data highlighted areas to focus future simulation efforts. Ongoing work is necessary to develop low-cost solutions to facilitate practice for robotic surgery and foster more inclusive and accessible surgical education.
Similar content being viewed by others
Explore related subjects
Discover the latest articles, news and stories from top researchers in related subjects.Avoid common mistakes on your manuscript.
Introduction
Robotic surgery is a positive, enduring innovation that surgeons are increasingly integrating into surgical practice for complex minimally invasive procedures [1]. As robotic surgery has gained relevance to multiple surgical specialties, and particularly in general surgery, urology, and gynecology, it has become an important component of surgical education [2]. Pre-operative simulated practice offers surgical trainees the opportunity to learn robotic surgery outside of the operating room, allowing them to improve their skills without impacting patient safety [2, 3].
Various robotic surgery simulators currently are available, including the da Vinci Skills Simulator (dVSS; Intuitive Surgical Inc., Sunnydale, California, USA) with the SimNow learning program, the dV-Trainer (dVT; Mimic Technologies, Inc., Seattle, Washington, USA), RobotiX Mentor (RM; 3D Systems, Littleton, Colorado, USA), SimSurgery Educational Platform Robot (SEP; SimSurgery, Oslo, Norway), and Robotic Surgical Simulator (RoSS; Simulated Surgical Systems LLC, San Jose, California, USA) [4, 5]. These simulators provide a similar experience to actual robotic surgery by using a robotic console and virtual reality (VR) technology [4]. Practice using VR simulators has been shown to help trainees develop skills that translate to improved operating room performance in robotic surgery [3, 6, 7].
A previous study has shown that dVSS outperforms the other two most commonly used VR simulators (dVT and RM) for content validity [5]. dVSS uses the da Vinci Xi surgeon console along with the computer learning program SimNow to provide the user with 47 basic training exercises and 33 “life-like” simulated robotic-assisted surgical procedures to practice [8]. The basic skill tasks allow the trainee to learn essential robotic surgery skills, including Endowrist manipulation, camera positioning, clutching, needle control and driving, energy, and dissection [8, 9]. Additionally, the program provides the trainee with a score for each task at the end of the exercise based on their path length, which is termed “economy of motion,” as well as the time to complete the exercise [8]. Any penalties, such as instrument collisions or excessive force, are also factored into the final score [5, 8]. A total score of greater than 90% indicates “mastery” of the task [5].
While simulation training sessions that provide hands-on practice for robotic surgery are effective, simulators are expensive and not readily accessible to many community surgeons and students [10, 11]. Furthermore, as multiple modalities of performing surgery have emerged—including open, laparoscopic, endovascular, and robotic—trainees face increasing demands on their training time. Developing an accessible, easily reproducible robotic surgery simulation model for on-demand practice could provide trainees with an additional tool to prepare for robotic surgery.
One prior report from Cruff [10] described a low-cost home simulation model for learning the hand movements required for robotic surgery [10]. The author detailed the creation of hand controllers that mimic the feel of the master tool manipulators (MTMs) on the da Vinci robot, allowing for accessible practice in any location at any time [10]. However, this descriptive paper did not assess outcomes related to the use of this model [10]. The purpose of our study is to evaluate whether practice with a low-cost home simulation model can improve trainees’ performance on the robotic surgery simulators. Additionally, we sought to understand novices’ experiences practicing with the home simulation model to evaluate if it is a user-friendly and effective tool for trainees learning robotic surgery.
Materials and methods
Development of home simulation kits
The controllers in the home simulation kits were designed to mimic the MTMs on the dVSS and were modeled from those described by Cruff [10]. Five different models of the hand controllers were assessed by experienced robotic surgeons at our institution who have interacted with the robotic hand controls over hundreds of robotic operations. The final model was made by taking a fine point tweezer and affixing two small Velcro loops as finger slots (Fig. 1). The ends of the metal tweezers were cut to widen the surface area to make it easier to grasp objects and to match the MTMs more closely. In addition to the two controllers, the home simulation kit also included a peg transfer board, sutures, and a sponge.
The peg transfer board allowed trainees to practice an exercise that mimicked the Sea Spikes 1 task on the SimNow program. The Sea Spikes 1 task requires the trainee to virtually grasp a series of rings and place them on the color concordant cone [8]. To model this exercise with the home simulation kits, the participants in the experimental group were instructed to use the model controller in their left hand to grasp each of the six triangles on the pins oriented in a circle on the peg transfer board. Then, they were to transfer each triangle individually to the controller in their right hand and place it down on the pins oriented in a rectangle on the right side of the pegboard. This exercise was adapted from its laparoscopic correlate described in the Fundamentals of Laparoscopic Surgery (FLS) [12].
The home simulation kits also included a sponge and suturing needles. These materials allowed the participants to practice needle driving with the hand controllers in a manner intended to mimic the Big Dipper Needle Driving task on SimNow. The Big Dipper Needle Driving task is a virtual suturing exercise on a foam suture pad, in which the trainee must drive the needle through a sequence of holes [8]. A series of dots were drawn on the sponge included in the home simulation kit to closely resemble the holes on the virtual suturing pad of the Big Dipper Needle Driving task. Using the home simulation kit, participants were able to practice driving the needle in and out of the different marks on the sponge to replicate the same pattern as the task in the simulator.
Study design and participants
Volunteer medical students who were novices to robotic surgery were recruited to participate in this study. The University of California, San Francisco (UCSF) Institutional Review Board determined this study to be exempt (IRB22-36266). All participants completed a pre-study survey on general demographics and factors that may affect their performance on the robotic simulator exercises, including video game experience [13] and surgical experience (Supplemental File 1). All participants then completed a baseline session on dVSS using SimNow, in which they completed two exercises (Sea Spikes 1 and Big Dipper Needle Driving).
After completion of this baseline SimNow session, participants were randomly assigned to either receive a robotic home simulation kit with instructions for practice or to receive no home simulation kit. Participants in the experimental group received their home simulation kit immediately following the baseline SimNow session and were instructed to practice with the hand controllers using the peg transfer board and suture supplies for 15 min each day for 2 weeks. Studies have shown that learning a task can be done more effectively when practice sessions are shorter and more frequent [14,15,16]. The practice time of 15 min every day for two weeks was chosen based on the efficacy of the distributed practice model and expectations of student commitment to practice.
Furthermore, these students received instructional video supplements that outlined proper technique for the peg transfer and needle driving exercises to facilitate correct practice with the home simulation kits. Students in the experimental group were also provided a daily log to detail the specific activities and the time they spent practicing. Two weeks after the baseline SimNow session, all participants returned for another session using the SimNow program on dVSS to repeat the Sea Spikes 1 and Big Dipper Needle Driving tasks (Fig. 2).
Main study parameters
After each trial of a task, SimNow produces a score report that provides an overall score (out of 100) for the trainee’s performance. In addition to the overall score for each task, the score report is also broken up into various components. The pre-specified performance parameters examined in this study included: (1) time taken to complete the exercise, (2) economy of motion, and (3) penalty sub-score.
Statistical analysis
Descriptive statistics regarding the demographics of the participants, including their year in medical school, gender, age, video game use, handedness, and experience in the OR, as well as with laparoscopic surgery and robotic surgery, were assessed using R version 4.1.3. The groups were compared on these demographics using Fisher’s exact test and t tests. A paired t test was used to compare the experimental group participants’ scores from the first session and the second session for both the sea spikes 1 task and the big dipper needle driving task. The same was completed for the control group. An ANCOVA controlling for pre-score was conducted using SPSS version 28 to compare the differences in SimNow final scores adjusting for baseline between students who did (experimental group) and who did not (control group) practice with the home simulation kit. Significance level was set at 0.05.
Qualitative interviews
Following the second SimNow session, all the students from the experimental and control groups participated in semi-structured debriefing interviews with RW regarding their experience using the robotic surgery simulator during the first and second simulator sessions. As a medical student, RW was chosen to conduct the interviews to allow for the most open and frank discussion with interviewees. Participants in the experimental group were asked additional questions to learn about their experience using the home simulation kit (Supplemental File 2). All interviews were recorded with participant consent and responses were transcribed. The primary goal of these interviews was to understand how specific skills, movements, and knowledge gained from the use of the home simulation kit applied to the robotic surgery simulator exercises on SimNow. The secondary goal of the interviews was to identify common challenges that participants faced when practicing with the home simulation kit and to find any improvements that could be made to the design.
All the transcripts were reviewed by two readers (RW and RB) independently and codes were identified using an inductive approach. The readers came to a consensus on developing the codebook. All transcripts were then double-coded, and the codes were reconciled. Themes were identified among coded data. In this analysis and to identify themes, RW brought her perspective as a medical student with no robotic surgery experience, and RB brought his perspective as a surgical resident with robotic surgery experience.
Results
Demographics
Overall, 33 participants completed the first dVSS session, of whom 29 participants completed both dVSS sessions (Fig. 2). Of these 29 participants, 15 participants (51.7%) received a home simulation kit and instructions for practice initially after the baseline robotic simulation session and 14 participants (48.3%) did not. Based on practice logs, experimental group participants practiced with the home simulation kits for a mean time of 138 min (66% of the practice goal), with a standard deviation of 86.3 min. Baseline characteristics of the control and experimental group did not differ significantly (Table 1).
SimNow performance
At the second trial, the experimental group improved their mean overall score by 30.26 points with a standard deviation of 25.82 points for sea spikes 1 (Table 2). The average improvement in the control group’s overall score was 14.28 points with a standard deviation of 27 points. The difference between the two groups was not significant by an ANCOVA controlling for pre-score.
For the Big Dipper Needle Driving task, both the experimental and control groups showed significant improvements during the second trial in their overall score, economy of motion, and time to completion. There were no significant differences between the experimental and control groups in the outcomes for Big Dipper Needle Driving between the first and second dVSS sessions. Furthermore, there were no significant associations between changes in score and practice time.
Qualitative interviews
All 29 students who returned for the second robotic simulator session completed the post-session interview immediately following the second task. Through the participant interviews, we identified three main themes of student experience: (1) Novices encounter initial challenges with the robotic simulator that improve with exposure, (2) Practice with the home simulation kit impacts the robotic simulator experience, and (3) The fidelity of the home simulation kit could be improved (Table 3).
Novices encounter initial challenges with the robotic simulator that improve with exposure
Students experienced challenges upon initial exposure to the robotic simulator in three areas: (1) familiarity, (2) technical skills, and (3) visuospatial skills. These challenges framed subsequent experiences with home simulation.
Many participants found it difficult to orient themselves to the robot and the tasks, as well as understanding the rules and goals of each exercise.
“I would say at first the most challenging is just being intentional with all of my hand movements. I wasn’t fully cognizant of all the rules and also just conceptually figuring out how to use the clutch, when to use it, and how to orient yourself while you’re using it was a little bit tricky for me.” (Experimental Participant #18)
Even after they became familiar with the simulator, the participants noted that they struggled with using the robot to perform the technical skills required to complete the SimNow tasks, including body positioning, instrument control, and needle handling. Concerning body positioning, students reported difficulties determining how they should orient their arms in physical space under the console of the machine to most effectively and comfortably complete each task on the simulator.
“The first time it was hard to maintain both of the arms of the robot in a distance so they don't collide with themselves, that was challenging. I think I did that a couple times and…I was penalized.” (Control Participant #1)
Regarding instrument control, most students specified they had initial difficulties with effectively using the clutch on the MTMs to complete the tasks.
“Just getting used to the clutch was really hard. I usually forgot to engage the clutch and so I would twist myself into like 35 positions, which made it hard.” (Experimental Participant #27)
Students also found needle handling difficult in their initial exposure to the robotic simulator.
“I had a really hard time figuring out orientation for the needle…so that I could insert it correctly, and that it came out exactly where I wanted it to, because I would put the needle into the sponge and pretty much have no idea how to turn my hand or where it was basically in the surface.” (Control Participant #16)
Students initially experienced challenges with their visuospatial skills, such as depth perception. Many students found it hard to perceive the environment through the VR robotic console and felt they did not have a precise idea of the movements they were making.
“I feel like just getting used to the disconnect between what you’re seeing and then where your hands are, because not seeing your actual hands while you’re doing something.” (Control Participant #22)
Participants in both the experimental and control groups identified that their abilities changed from the first SimNow session to the second SimNow session. During the second session, they were more familiar with the interface and activities, felt more comfortable with basic skills, and had improved understanding of the depth perception and use of visual cues.
Practice with the home simulation kit impacts the robotic simulator experience
Within the experimental group, participants attributed a variety of experiences during the second SimNow session to their practice with the home kit, including both technical skills and understanding of the robotic console.
In terms of technical skills, participants felt that practicing needle manipulation with the controllers provided with the home simulation kits was useful to develop their dexterity and improve their needle handling and wristed movements.
“[The home simulation kit was] helpful to do the motion; just have your fingers in the right place and kind of pick things up and put things down. The sponge was helpful in judging the needle orientation, and the hand motions you need to do the scoop.” (Experimental Participant #12)
“[The kit helped] needle control and kind of determining which ways I needed to twist my wrist and my fingers in order to get [the needle] to drive through, which definitely translated over here [at the robotic simulator].” (Experimental Participant #17)
Others stated that the home simulation kit helped improve their ambidexterity, a helpful skill for many tasks on the robotic surgery simulator.
“Just being a little bit more ambidextrous with how I did the needle driving activity and trying to use the other hand because I’m predominantly right-handed and I think for the first time I was using predominantly my right hand, but I was…more conscious of which hand I was using [during the second session].” (Experimental Participant #18)
When probing specifically about how the home simulation kit affected the participants’ haptic feedback, or sense of touch, on the robotic simulator, students highlighted the differences between the haptic sensation in the home kit and that of the robotic simulator.
“It's definitely a different haptic feeling. I felt like it was harder to drive the needle through the sponge than it is to drive the needle through the fake robotic sponge. But, just having the haptic feedback was helpful and that is something you get with the home kit.” (Experimental Participant #12)
Finally, participants also communicated that the home simulation kit improved their sense of familiarity with the tasks and allowed them to strategize to complete the tasks more efficiently.
“I learned how to go about the needle driving activity most efficiently, how to angle my hands so that I could basically just put the needle through very easily and seamlessly.” (Experimental Participant #18)
“I think that I was a little bit like, I wouldn’t say slower, but more kind of methodical, and that's something that came from the practice.” (Experimental Participant #4)
The fidelity of the home simulation kit could be improved
While participants found the home kits to be helpful in improving their skills and comfort with the robotic simulator, they also had some suggestions for refining the kits for future use. Their suggestions focused on model design transferability to the robotic simulator, as well as on the mechanical challenges they experienced.
Regarding model design transferability, despite the usefulness of the sponge to learn to judge needle orientation and to practice the wrist motions to drive the needle, it had a different feeling than the robotic simulator. In general, participants expressed that using a sponge for the needle driving activity in the home kit produced more resistance than the robotic simulator. Students reported that this difference made it challenging to understand exactly how much pressure should be used when driving the needle on the robotic simulator. Some suggested using another material with less resistance to better mimic the virtual foam and its lack of haptic feedback on the robotic simulator.
“If you’re actually threading the needle through the real sponge, you’re going to feel resistance, but here [on the robotic simulator], you don’t feel anything.” (Participant #14)
Participants also suggested that it would be helpful to include something on the home kit that would closely resemble the clutch of the robotic simulator.
“Maybe put some type of pad for the clutch, because this basically felt slightly different…I got used to pressing with my finger curled up and when I was like, ‘Oh wait, where’s the clutch?’ and I had to re-find the clutch.” (Experimental Participant #26)
Regarding mechanical challenges, participants noted that certain parts of the home kit were less comfortable to use or needed to be reinforced to prevent any breakage, interfering with their ability to use the practice kits as directed. Particularly, many students mentioned the difficulties they experienced with the stiffer grip of the tweezers used to design the hand controllers in the home simulation kits.
“The tips of the tweezers didn’t have much grip either, and so you’re… pressing really, really hard to hold the needle in place, because otherwise it was just slipping out of place. So I guess maybe swap to a different type of tweezer that might have more grip.” (Experimental Participant #17)
Discussion
Given the need to provide practice opportunities to prepare learners to use new surgical technologies, this study evaluated home practice for robotic surgery. Overall, low-cost robotic surgery home simulation kits did not lead students to better performance on dVSS compared to control students, though interview data highlighted the potential of home simulation and future directions for simulator development. The score increase in both groups between simulation sessions likely reflects task familiarity on dVSS gained during the first session. Challenges with physical fidelity of the home robotic simulation kits, as discussed by many participants in interviews, may have limited additional skill gains in the home practice group. Furthermore, many participants did not meet the practice goal, likely because home practice was unsupervised and unscheduled. Additionally, the duration of practice was self-reported, which may have been inaccurate and did not account for how correctly the participants practiced. Finally, since medical students are not expected to perfect their robotic surgical skills, they may have less motivation to practice compared to, for example, surgical residents who will be expected to master these skills.
For future iterations of the home simulation kit, participants noted the importance of addressing the haptics of the model and choosing appropriate practice tasks. While this feedback from medical students will be important in planning future studies, it would also be helpful to include surgical residents with more experience in further trials. Prior experience with the robot may allow trainees to focus home practice on the most useful skills, while also practicing with better technique, leading to greater overall improvement.
There remains a need for a low-cost simulation model to facilitate engagement and accessible practice for robotic surgery. Many trainees do not have formal robotic surgery simulation training curricula in place at their institutions [17, 18]. Common barriers to including robotic simulation in programs are cost and access to simulator facilities [17]. Although low-cost models may not replace VR simulators, prior work has shown the promise of simulators representing a range of physical fidelities, including in robotic surgery [19, 20]. Simulation may be most educational and cost-effective when a coordinated progression of simulator fidelity is thoughtfully introduced [21]. Optimizing a low-cost robotic simulation model could provide a helpful bridge to practice for early trainees who have more limited access to the robotic simulators.
This study begins to address this need by describing important considerations for low-cost robotic simulator development. Improvements to model design transferability, such as fine-tuning the resistance of the controllers or including a clutch, could potentially lead to more efficacious practice and greater improvements in performance. It was apparent that a number of students in the experimental group showed strong motivation to practice their skills with the home simulation kits. Some students spent several hours practicing with the home kits and found them to be an excellent way to engage with robotic surgical skills. Having additional time to practice at home can be an important component of learning when there is limited student exposure to robotic surgery [22, 23]. Thus, further refining this intervention may increase early trainees’ engagement with robotic surgery. In the future, it may also be more helpful to focus on developing the specific technical skills necessary for success in robotic surgery, rather than replicating the specific simulated tasks. Previously, expert robotic surgeons have deconstructed robotic surgery into seven key elements: pick and place, two-handed transfer, wrist manipulation, camera control, clutching, suturing, and energy use [24, 25]. An ideal home simulation kit can provide specific practice for the technical skills of pick and place, two-handed transfer, and wrist manipulation. Future work with the home kits can specifically target these transferable skills to potentially lead to greater improvement in performance.
In conclusion, the home simulation kits will need to be further refined to better represent the robotic surgery controllers and the practice tasks should be modified to optimize user skill acquisition in the future. However, work with home simulation kits represents the beginning of a needed innovation in robotic surgery. The development of creative, low-cost solutions to practice surgical techniques is essential to reach more potential trainees and foster more inclusive and accessible surgical education.
Data availability
The data that support the findings of this study are available on request from the corresponding author, RW.
Abbreviations
- MTMs:
-
Master tool manipulators
- dVSS:
-
da Vinci skills simulator
- VR:
-
Virtual reality
- SS1:
-
Sea spikes 1
- BDND:
-
Big dipper needle driving
- FLS:
-
Fundamentals of laparoscopic surgery
References
Tan A, Ashrafian H, Scott AJ et al (2016) Robotic surgery: disruptive innovation or unfulfilled promise? A systematic review and meta-analysis of the first 30 years. Surg Endosc 30(10):4330–4352. https://doi.org/10.1007/s00464-016-4752-x
Chen R, Rodrigues Armijo P, Krause C, Siu KC, Oleynikov D, SAGES Robotic Task Force (2020) A comprehensive review of robotic surgery curriculum and training for residents, fellows, and postgraduate surgical education. Surg Endosc. 34(1):361–367. https://doi.org/10.1007/s00464-019-06775-1
Schmidt MW, Köppinger KF, Fan C et al (2021) Virtual reality simulation in robot-assisted surgery: meta-analysis of skill transfer and predictability of skill. BJS Open. 5(2):zraa066. https://doi.org/10.1093/bjsopen/zraa066
Kumar A, Smith R, Patel VR (2015) Current status of robotic simulators in acquisition of robotic surgical skills. Curr Opin Urol 25(2):168–174. https://doi.org/10.1097/MOU.0000000000000137
Hertz AM, George EI, Vaccaro CM, Brand TC (2018) Head-to-head comparison of three virtual-reality robotic surgery simulators. JSLS. 22(1):e2017.00081. https://doi.org/10.4293/JSLS.2017.00081
Radi I, Tellez JC, Alterio RE et al (2022) Feasibility, effectiveness and transferability of a novel mastery-based virtual reality robotic training platform for general surgery residents. Surg Endosc. https://doi.org/10.1007/s00464-022-09106-z
Aghazadeh MA, Mercado MA, Pan MM, Miles BJ, Goh AC (2016) Performance of robotic simulated skills tasks is positively associated with clinical robotic surgical performance. BJU Int 118(3):475–481. https://doi.org/10.1111/bju.13511
Intuitive | Da Vinci SimNow | Robotic Simulator. Accessed August 24, 2022. https://www.intuitive.com/en-us/products-and-services/da-vinci/education/simnow
Tergas AI, Sheth SB, Green IC, Giuntoli RL, Winder AD, Fader AN (2013) A pilot study of surgical training using a virtual robotic surgery simulator. JSLS 17(2):219–226. https://doi.org/10.4293/108680813X13654754535872
Cruff J (2021) Robotic surgical training at home: a low-fidelity simulation method. J Surg Educ 78(2):379–381. https://doi.org/10.1016/j.jsurg.2020.07.021
MacCraith E, Forde JC, Davis NF (2019) Robotic simulation training for urological trainees: a comprehensive review on cost, merits and challenges. J Robot Surg 13(3):371–377. https://doi.org/10.1007/s11701-019-00934-1
Zendejas B, Ruparel RK, Cook DA (2016) Validity evidence for the fundamentals of laparoscopic surgery (FLS) program as an assessment tool: a systematic review. Surg Endosc 30(2):512–520. https://doi.org/10.1007/s00464-015-4233-7
Harbin AC, Nadhan KS, Mooney JH et al (2017) Prior video game utilization is associated with improved performance on a robotic skills simulator. J Robot Surg 11(3):317–324. https://doi.org/10.1007/s11701-016-0657-x
Willis RE, Curry E, Gomez PP (2013) Practice schedules for surgical skills: the role of task characteristics and proactive interference on psychomotor skills acquisition. J Surg Educ 70(6):789–795. https://doi.org/10.1016/j.jsurg.2013.06.014
Baddeley AD, Longman DJA (1978) The influence of length and frequency of training session on the rate of learning to type. Ergonomics 21(8):627–635. https://doi.org/10.1080/00140137808931764
Bilodeau EA, Bilodeau IM (1961) Motor-skills learning. Annu Rev Psychol 12(1):243–280. https://doi.org/10.1146/annurev.ps.12.020161.001331
George LC, O’Neill R, Merchant AM (2018) Residency training in robotic general surgery: a survey of program directors. Minim Invasive Surg 2018:8464298. https://doi.org/10.1155/2018/8464298
Shaw RD, Eid MA, Bleicher J et al (2022) Current barriers in robotic surgery training for general surgery residents. J Surg Educ 79(3):606–613. https://doi.org/10.1016/j.jsurg.2021.11.005
Saito S, Endo K, Sakuma Y, Sata N, Lefor AK (2023) Simulator fidelity does not affect training for robot-assisted minimally invasive surgery. J Clin Med 12(7):2557. https://doi.org/10.3390/jcm12072557
Lefor AK, Harada K, Kawahira H, Mitsuishi M (2020) The effect of simulator fidelity on procedure skill training: a literature review. Int J Med Educ 11:97–106. https://doi.org/10.5116/ijme.5ea6.ae73
Brydges R, Carnahan H, Rose D, Rose L, Dubrowski A (2010) Coordinating progressive levels of simulation fidelity to maximize educational benefit. Acad Med 85(5):806–812. https://doi.org/10.1097/ACM.0b013e3181d7aabd
Hall ME, Reddy RM (2017) Should every medical student receive exposure to robotic surgery? J Robotic Surg 11(3):375–376. https://doi.org/10.1007/s11701-016-0643-3
Sultan I, Bardi MF, Baatta AM, Almaghrabi S, Mohammed RA (2022) Medical students’ attitude towards robotic surgery: a cross-sectional survey. J Med Educ Curric Dev. https://doi.org/10.1177/23821205211066483
Lee CS, Khan MT, Patnaik R, Stull MC, Krell RW, Laverty RB (2022) Model development of a novel robotic surgery training exercise with electrocautery. Cureus. https://doi.org/10.7759/cureus.24531
Lyons C, Goldfarb D, Jones SL et al (2013) Which skills really matter? Proving face, content, and construct validity for a commercial robotic simulator. Surg Endosc 27(6):2020–2030. https://doi.org/10.1007/s00464-012-2704-7
Funding
Rachel Wile received funding through UCSF’s Summer Explore Program. Riley Brian receives funding through the UCSF-Intuitive Simulation-Based Surgical Education Research Fellowship. Jason Cruff previously received a grant from Intuitive Surgical with plans to perform a similar research project at his home institution but experienced unforeseen problems with study enrollment, and thus the research could not be completed. None of these funds from Intuitive Surgical were used and the grant was returned. Intuitive Surgical was not involved with any part of this project. The remaining authors did not receive support from any organization for the submitted work.
Author information
Authors and Affiliations
Contributions
All authors contributed to the study conception and design. The robotic surgery simulator sessions were run by RW, RB, and NR. Material preparation, data collection and analysis were performed by RW, RB, and PO’S. The first draft of the manuscript was written by RW and RB. All authors had substantial contributions to revising the work and all authors read and approved the final manuscript.
Corresponding author
Ethics declarations
Competing interests
The authors declare no competing interests.
Ethical approval
The University of California, San Francisco (UCSF) Institutional Review Board determined this study to be exempt (IRB22-36266).
Consent to participate
Informed consent was obtained from all individual participants included in the study.
Consent to publish
All individual study participant data included in the manuscript has been anonymized. The manuscript contains no individual identifying details, images, or videos.
Additional information
Publisher's Note
Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.
Supplementary Information
Below is the link to the electronic supplementary material.
Rights and permissions
Open Access This article is licensed under a Creative Commons Attribution 4.0 International License, which permits use, sharing, adaptation, distribution and reproduction in any medium or format, as long as you give appropriate credit to the original author(s) and the source, provide a link to the Creative Commons licence, and indicate if changes were made. The images or other third party material in this article are included in the article's Creative Commons licence, unless indicated otherwise in a credit line to the material. If material is not included in the article's Creative Commons licence and your intended use is not permitted by statutory regulation or exceeds the permitted use, you will need to obtain permission directly from the copyright holder. To view a copy of this licence, visit http://creativecommons.org/licenses/by/4.0/.
About this article
Cite this article
Wile, R.K., Brian, R., Rodriguez, N. et al. Home practice for robotic surgery: a randomized controlled trial of a low-cost simulation model. J Robotic Surg 17, 2527–2536 (2023). https://doi.org/10.1007/s11701-023-01688-7
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s11701-023-01688-7