Abstract
For enhancing the corrosion resistance of polyurethane coatings, the behavior of strontium aluminum polyphosphate (SAPP) and sodium molybdate (SM) on bare galvanized steel was investigated by DC polarization after 24 h of immersion. The synergetic effect of SAPP and SM, at different ratios, was studied and evaluated for up to 24 h. The obtained results show that the ideal mixture had the lowest icorr; therefore, the lowest corrosion rate. Moreover, the morphological properties of the samples were reviewed via scanning electron microscope, energy-dispersive X-ray analysis, and atomic force microscope that concurred the generation of barrier on the surface. Results revealed that samples were immersed in a mixture of pigments with a uniform texture covering the main galvanized layer. A polyurethane coating containing a mixture of SAPP and SM was prepared at the optimum ratio with the optimal λ for this mixture. This coating was applied to galvanized steel, and then, samples were immersed in 3.5 wt% NaCl solution for 60 days and were further studied by electrical impedance spectroscopy (EIS). Moreover, gloss, hardness, and laboratory tests were measured within 60 days. An appropriate relationship between EIS results and non-destructive tests was obtained. There is a reasonable correlation in decreasing hardness and gloss of samples, their physical properties, and Rc, their corrosion resistance over time.
This is a preview of subscription content, log in via an institution to check access.
Similar content being viewed by others
References
Al U, Station N, Dhabi A (1996) Mechanism of corrosion inhibition by sodium molybdate. Desalination 107:29–43
Alibakhshi E, Ghasemi E, Mahdavian M (2014) Sodium zinc phosphate as a corrosion inhibitive pigment. Prog Org Coat 77:1155–1162. https://doi.org/10.1016/j.porgcoat.2014.03.027
Bierwagen G (2008) The physical chemistry of organic coatings revisited—viewing coatings as a materials scientist. J Coat Technol Res 5:133–155. https://doi.org/10.1007/s11998-007-9066-4
Buxbaum G (1998) Industrial inorganic pigments. Wiley-VCH, New Jersey
Deflorian F, Rossi S (2006) An EIS study of ion diffusion through organic coatings. Electrochim Acta 51:1736–1744. https://doi.org/10.1016/j.electacta.2005.02.145
Deyá M, Di Sarli AR, Del Amo B, Romagnoli R (2008) Performance of anticorrosive coatings containing tripolyphosphates in aggressive environments. Ind Eng Chem Res 47:7038–7047. https://doi.org/10.1021/ie071544d
Emad SGR, Zhou X, Morsch S et al (2019) Progress in Organic Coatings How pigment volume concentration (PVC) and particle connectivity affect leaching of corrosion inhibitive species from coatings. Prog Org Coat 134:360–372. https://doi.org/10.1016/j.porgcoat.2019.05.008
Habibpour S, Um JG, Jun Y, seok, et al (2021) Structural impact of graphene nanoribbon on mechanical properties and anti-corrosion performance of polyurethane nanocomposites. Chem Eng J 405:126858. https://doi.org/10.1016/j.cej.2020.126858
Heydarpour MR, Zarrabi A, Attar MM, Ramezanzadeh B (2014) Progress in Organic Coatings Studying the corrosion protection properties of an epoxy coating containing different mixtures of strontium aluminum polyphosphate ( SAPP ) and zinc aluminum phosphate ( ZPA ) pigments. Prog Org Coat 77:160–167. https://doi.org/10.1016/j.porgcoat.2013.09.003
Kandeloos AJ, Attar MM (2019) The diffusion and adhesion relationship between free films and epoxy coated mild steel. Prog Org Coat. https://doi.org/10.1016/j.porgcoat.2019.105405
Liu Y, Li H, Li Z (2013) EIS investigation and structural characterization of different hot-dipped zinc-based coatings in 3.5% NaCl solution. Int J Electrochem Sci 8:7753–7767
Liu Y, Zhou X, Lyon SB et al (2017) An organic coating pigmented with strontium aluminium polyphosphate for corrosion protection of zinc alloy coated steel. Prog Org Coat 102:29–36. https://doi.org/10.1016/J.PORGCOAT.2016.02.020
Mahdavian M, Attar MM (2006) Another approach in analysis of paint coatings with EIS measurement: phase angle at high frequencies. Corros Sci 48:4152–4157. https://doi.org/10.1016/j.corsci.2006.03.012
Manchet SL, Verchère D, Landoulsi J (2016) Effects of organic and inorganic treatment agents on the formation of conversion layer on hot-dip galvanized steel : An X-ray photoelectron spectroscopy study. Thin Solid Films 520:2009–2016. https://doi.org/10.1016/j.tsf.2011.09.064
Manoli Z, Pecko D, Assche V, Manoli Z, Stiens J (2018) Transport of electrolyte in organic coatings on metal. Paint Coat Ind 6:87–114. https://doi.org/10.5772/intechopen.81422
Margarit-Mattos ICP (2020) EIS and organic coatings performance: revisiting some key points. Electrochim Acta 354:136725. https://doi.org/10.1016/j.electacta.2020.136725
Naderi R, Attar MM (2008) Electrochemical assessing corrosion inhibiting effects of zinc aluminum polyphosphate (ZAPP) as a modified zinc phosphate pigment. Electrochim Acta 53:5692–5696. https://doi.org/10.1016/j.electacta.2008.03.029
Naderi R, Attar MM (2009) Electrochemical study of protective behavior of organic coating pigmented with zinc aluminum polyphosphate as a modified zinc phosphate at different pigment volume concentrations. Prog Org Coat 66:314–320. https://doi.org/10.1016/j.porgcoat.2009.08.009
Ramezanzadeh B, Attar MM (2011) Studying the corrosion resistance and hydrolytic degradation of an epoxy coating containing ZnO nanoparticles. Mater Chem Phys 130:1208–1219. https://doi.org/10.1016/j.matchemphys.2011.08.065
Sabet Bokati K, Dehghanian C, Yari S (2017) Corrosion inhibition of copper, mild steel and galvanically coupled copper-mild steel in artificial sea water in presence of 1H-benzotriazole, sodium molybdate and sodium phosphate. Corros Sci 126:272–285. https://doi.org/10.1016/j.corsci.2017.07.009
Wang Z, Li J, Wang Y, Wang Z (2017) An EIS analysis on corrosion resistance of anti-abrasion coating. Surf Interface 6:33–39. https://doi.org/10.1016/j.surfin.2016.11.003
Wicks ZW, Jones FN, Pappas SP, Wicks DA (2006) Organic coatings: science and technology, 4th edn. Wiley, New Jersey
Winter PM, Lanza GM, Wickline SA et al (2012) Encyclopedia of nanotechnology: polymer coatings. Springer, New York, pp 2167–2174
Zarubica AR, Miljkovi MN, Purenovi MM, Tomi VB (2005) COLOUR parameters, whiteness indices and physical features of marking paints for horizontal signalization. Phys Chem Technol 3:205–216
Zhou W, Liu Y, Wang J (2017) Corrosion protection of molybdenum–phosphorus compounds based coating formed on hot dip galvanized steel in a Cl-Ione Environment. Advan Mater Res 752:2017–2020. https://doi.org/10.4028/www.scientific.net/AMR.750-752.2017
Author information
Authors and Affiliations
Corresponding author
Ethics declarations
Conflict of interest
All authors have participated in (a) conception and design, or analysis and interpretation of the data; (b) drafting the article or revising it critically for important intellectual content; and (c) approval of the final version.
Additional information
Publisher's Note
Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.
Rights and permissions
Springer Nature or its licensor (e.g. a society or other partner) holds exclusive rights to this article under a publishing agreement with the author(s) or other rightsholder(s); author self-archiving of the accepted manuscript version of this article is solely governed by the terms of such publishing agreement and applicable law.
About this article
Cite this article
Taleghani, N., Attar, M.M. Corrosion, physical characters, and synergetic effects of SAPP and SM in polyurethane coating on galvanized steel. Chem. Pap. 77, 1497–1506 (2023). https://doi.org/10.1007/s11696-022-02525-1
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s11696-022-02525-1