Abstract
The shape of the tank plays an important role in the hydrodynamic performance of the agitation. A 3D simulation was done using CFD calculation code (CFX16.0). The study was carried out for large Reynolds number: 104–2.105. Navier–Stokes equations governing the phenomenon are solved by a method of discretization finite volume. The turbulence model used is the k–ε standard type. Our main goal was to study the influence of the shape of the tank mechanically agitated by Rushton turbine. Four configurations were used: cylindrical tank, polygon tank without/with baffles (vertical baffle and circular) and circular baffle cut four sides with the same angle. The effect of the shape of the tank and the baffle shape has been studied. Comparing our results seems favorable and gives very good agreement with the experimental results of the literature (Karcz and Major in Chem Eng Process 37:249–256. https://doi.org/10.1016/S0255-2701(98)00033-6, 1998).
Similar content being viewed by others
Abbreviations
- a :
-
Blade length (m)
- b :
-
Blade height (m)
- B :
-
Width of baffles (M)
- c :
-
Impeller off-bottomed clearance (m)
- C :
-
Torque (N m)
- d :
-
Disc diameter (m)
- D :
-
Impeller diameter (m)
- d S :
-
Shaft diameter (m)
- e :
-
Disc thickness (m)
- H :
-
Vessel tank height (m)
- N :
-
Impeller rotational speed (1/s)
- N P :
-
Power number (dimensionless)
- P :
-
Power (W)
- R :
-
Radial coordinate (m)
- Re :
-
Reynolds number (dimensionless)
- T :
-
Tank diameter (m)
- V :
-
Velocity (m/s)
- V z :
-
Axial velocity (m/s)
- V θ :
-
Tangential velocity (m/s)
- V r :
-
Radial velocity (m/s)
- w :
-
Baffle length (m)
- τ :
-
Shear stress (Pa)
- ρ :
-
Fluid density (kg/m3)
- η :
-
Viscosity (Pa s)
- θ :
-
Angular coordinate (degree)
- ω :
-
Angular velocity (rad/s)
- α :
-
Cut angle (degree)
- CFD:
-
Computational fluid dynamic
- PBT:
-
Pitched blade turbine
- PIV:
-
Particle image velocity
- RRF:
-
Rotating reference frame
- MRF:
-
Multiple reference frame
- LDA:
-
Laser eddy anemometry
- LES:
-
Large eddy simulation
- VB:
-
Vertical baffles
- CHB:
-
Circular horizontal baffle
- CHCB:
-
Circular horizontal cut baffle
References
Ameur H, Bouzit M, Helmaoui M (2011) Numerical study of fluid flow and power consumption in a stirred vessel with a Scaba 6SRGT impeller. Chem Process Eng 32:351–366. https://doi.org/10.2478/v10176-011-0028-0
Aubin J, Sauze NL, Bertrand J, Fletcher DF, Xuereb C (2004) PIV measurements of flow in an aerated tank stirred by a down and an up- pumping axial flow impellers. Chem Eng Sci 28:447–456. https://doi.org/10.1016/j.expthermflusci.2001.12.001
Chtourou W, Ammar M, Driss Z, Abid MS (2014) CFD prediction of the turbulent flow generated in stirred square tank by a Rushton turbine. Energy Power Eng 6:95–110. https://doi.org/10.4236/epe.2014.65010
Deglon DA, Meyer CJ (2006) CFD modeling of stirred tanks: numerical considerations. Min Eng 19:1059–1068. https://doi.org/10.1016/j.mineng.2006.04.001
Devarajulu C, Loganathan M (2016) Effect of impeller clearance and liquid level on critical impeller speed in an agitated vessel using different axial and radial impellers. J Appl Fluid Mech 9(6):2753–2761
Falkovich G (2011) Fluid mechanics—a short course for physicists New York. Cambridge University Press, Cambridge. https://doi.org/10.1017/CBO9780511794353
Hartmann H, Derksen JJ, Montavon C, Pearson J, Hamill IS, van den Akker HEA (2004) Assessment of large eddy and RANS stirred tank simulations by means of LDA. Chem Eng Sci 59:2419–2432. https://doi.org/10.1016/j.ces.2004.01.065
Jenne M, Reuss M (1999) A critical assessment on the use of k-ε turbulence models for simulation of the turbulent liquid flow induced by a Rushton-turbine in baffled stirred-tank reactors. Chem Eng Sci 54:3921–3941. https://doi.org/10.1016/S0009-2509(99)00093-7
Joshi JB, Nere NK, Rane CV, Murthy BN, Mathpati CS, Patwardhan AW, Ranade VV (2011) CFD simulation stirred tanks: comparison of turbulence models. Part I: radial flow impellers. Can J Chem Eng 89:23–82. https://doi.org/10.1002/cjce.20446
Kaminoyama M, Saito F, Kamiwano M (1990) Flow analogy of pseudo- plastic liquid in geometrically similar stirred vessels based on numeri-cal analysis. J Chem Eng Japan 23(2):214–221. https://doi.org/10.1252/jcej.23.214
Kamla Y et al (2017) Effect of the inclination of baffles on the power consumption and fluid flows in a vessel stirred by a Rushton turbine. Chin J Mech Eng 30(4):1008–1016. https://doi.org/10.1007/s10033-017-0158-5
Karcz J, Major M (1998) An effect of a baffle length on the power consumption in an agitated vessel. Chem Eng Process 37:249–256. https://doi.org/10.1016/S0255-2701(98)00033-6
Khopkar AR, Mavros P, Ranade VV, Bertrand J (2004) Simulation of flow generated by an axial-flow impeller: batch and continuous operation. Chem Eng Res Des 82(A6):737–751. https://doi.org/10.1205/026387604774196028
Konfršt B et al (2014) Study of the turbulent flow structure around a standard Rushton impeller. Chem Process Eng 35(1):137–147. https://doi.org/10.2478/cpe-2014-0010
Kresta SM, Wood PE (1991) Prediction of the three-dimensional turbulent flow in stirred tanks. AIChE J 37(3):448–460. https://doi.org/10.1002/aic.690370314
Kumaresan T, Joshi JB (2006) Effect of impeller design on the flow pattern and mixing in stirred tanks. Chem Eng Sci 115:173–193. https://doi.org/10.1016/j.cej.2005.10.002
Kuncewicz CZ, Pietrzykowski M (2001) Hydrodynamic model of a mixing vessel with pitched-blade turbines. Chem Eng Sci 56:4659–4672. https://doi.org/10.1016/S0009-2509(01)00119-1
Kysela B, et al (2014) CFD Simulation of the discharge flow from standard Rushton impeller. Int J Chem Eng :7 (Article ID 706149)
Micheletti M, Baldi S, Yeoh SL, Ducci A, Papadakis G, Lee KC, Yianneskis M (2004) On spatial and temporal variations and estimates of energy dissipation. Trans I Chem E Part A Chem Eng Res Des 82(A9):1188–1198. https://doi.org/10.1205/cerd.82.9.1188.44172
Mohsen K et al (2012) Effects of different mesh schemes and turbulence models in CFD modelling of stirred tanks. Physicochem Probl Min Process 48(2):513–553
Montante G, Lee KC, Brucato A, Yianneskis M (2001) Numerical simulations of the dependency of flow pattern on impeller clearance in stirred vessel. Chem Eng Sci. https://doi.org/10.1016/S0009-2509(01)00089-6
Mosser PA(2012) Comparaison de méthodes de détection du vortex dans des cuves agitées (Mémoire de maîtrise, École Polytechnique de Montréal). https://publications.polymtl.ca/971/
Mounir B et al (2003) Modélisation de l’écoulement turbulent induit par une turbine de Rushton en cuve standard: approche pseudo-stationnaire. Mécanique Industries 4:301–318. https://doi.org/10.1016/S1296-2139(03)00051-4
Ranade VV (1997) An efficient computational model for simulating flow in stirred vessels: a case of Rushton turbine. Chem Eng Sci 52(24):4473–4484. https://doi.org/10.1016/S0009-2509(97)00292-3
Ranade VV (2002) CFD predictions of flow near impeller blades in baffled stirred vessels: assessment of computational snapshot approach. Chem Eng Commun 189:895–922. https://doi.org/10.1080/00986440213134
Ranade VV, Perrard M, Le Sauze N, Xuereb C, Bertrand J (2001) Trailing vortices of Rushton turbine: PIV measurements and CFD simulations with snapshot approach. Chem Eng Res Des 79:3–12. https://doi.org/10.1205/026387601528471
Roy S, Acharya S (2012) Scalar mixing in a turbulent stirred tank with pitched blade turbine: role of impeller speed perturbation. Chem Eng Res Des 90:884–898. https://doi.org/10.1016/j.cherd.2011.10.009
Svensson FJE, Rasmuson A (2004) LDA measurements in a stirred tank with a liquid–liquid system at high volume percentage dispersed phase. Chem Eng Technol 27:335–339. https://doi.org/10.1002/ceat.200401981
Vakili MH, Esfaharry MN (2009) CFD analysis of turbulence in a baffled stirred tank, a three compartment model. Chem Eng Sci 64:351–362. https://doi.org/10.1016/j.ces.2008.10.037
Wu BX (2012) Large eddy simulation of mechanical mixing in anaerobic digesters. Biotechnol Bioeng 109:804–812. https://doi.org/10.1002/bit.24345
Youcefi S et al (2013) Effect of some design parameters on the flow fields and power consumption in a vessel stirred by a Rushton turbine. Chem Process ENG 34(2):293–307. https://doi.org/10.2478/cpe-2013-0024
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Foukrach, M., Bouzit, M., Ameur, H. et al. Influence of the vessel shape on the performance of a mechanically agitated system. Chem. Pap. 73, 469–480 (2019). https://doi.org/10.1007/s11696-018-0606-4
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s11696-018-0606-4