Abstract
The study reports successful synthesis of [Co(NH3)2(C2H8N2)2]Cl3 photoadduct and its subsequent use as a filler in polyaniline (PANI) matrix to form PANI/photoadduct nanocomposite by chemical oxidative polymerisation method. The photo-induced exchange of ligands between the hexamine metal complex and ethylenediamine solution on photo irradiation resulted in the formation of photoadduct. FTIR and UV–Vis analysis show a significant interaction developed between the photoadduct and the PANI chains and hence successful nanocomposite formation. Optical band gap determination from Tauc plot shows higher value of band gap in case of PANI/photoadduct nanocomposite than that of PANI. The structural characteristics of the PANI/photoadduct nanocomposite as observed from XRD show crystalline nature of the nanocomposite. SEM analysis shows photoadduct particles lying embedded in the polymer matrix. The porous sponge like surface morphology of the nanocomposite shows potential of material to act as a catalyst. Electrical measurement of the nanocomposite revealed its less conducting nature than PANI which is attributed to charge carrier scattering by embedded photoadduct particles. This is in consistent with the higher value of band gap energy obtained in case of PANI/photoadduct nanocomposite. The thermal analysis shows improvement in the thermal stability of PANI nanocomposite with incorporated filler photoadduct, which holds the polymer chains tightly bound to each other and hence confers some extra stability to the polymer against thermal degradation.
![](http://media.springernature.com/m312/springer-static/image/art%3A10.1007%2Fs11696-016-0093-4/MediaObjects/11696_2016_93_Fig1_HTML.gif)
![](http://media.springernature.com/m312/springer-static/image/art%3A10.1007%2Fs11696-016-0093-4/MediaObjects/11696_2016_93_Fig2_HTML.gif)
![](http://media.springernature.com/m312/springer-static/image/art%3A10.1007%2Fs11696-016-0093-4/MediaObjects/11696_2016_93_Fig3_HTML.gif)
![](http://media.springernature.com/m312/springer-static/image/art%3A10.1007%2Fs11696-016-0093-4/MediaObjects/11696_2016_93_Fig4_HTML.gif)
![](http://media.springernature.com/m312/springer-static/image/art%3A10.1007%2Fs11696-016-0093-4/MediaObjects/11696_2016_93_Fig5_HTML.gif)
![](http://media.springernature.com/m312/springer-static/image/art%3A10.1007%2Fs11696-016-0093-4/MediaObjects/11696_2016_93_Fig6_HTML.jpg)
![](http://media.springernature.com/m312/springer-static/image/art%3A10.1007%2Fs11696-016-0093-4/MediaObjects/11696_2016_93_Fig7_HTML.gif)
![](http://media.springernature.com/m312/springer-static/image/art%3A10.1007%2Fs11696-016-0093-4/MediaObjects/11696_2016_93_Fig8_HTML.gif)
Similar content being viewed by others
References
Ameen S, Akhtar MS, Ansari SG, Yang OB, Shin HS (2009) Electrophoretically deposited polyaniline/ZnO nanoparticles for p–n heterostructure diodes. Superlattices Microstruct 46:872–880. doi:10.1016/j.spmi.2009.09.007
Anand J, Palaniappan S, Sathyanarayana DN (1998) Conducting polyaniline blends and composites. Prog Polym Sci 23:993–1018
Gangopadhyay R, De A (2000) Conducting polymer nanocomposites: a brief overview. Chem Mater 12:608–622. doi:10.1021/cm990537f
Guo H, Zhu H, Lin H, Zhang J (2008) Polyaniline/Fe3O4 nanocomposites synthesized under the direction of cationic surfactant. Mater Lett 62:2196–2199. doi:10.1016/j.matlet.2007.11.047
Hull TR, Kandola BK (2009) Fire retardancy of polymers: new strategies and mechanisms. Royal Society of Chemistry, London, UK
Jang SH, Han MG, Im SS (2000) Preparation and characterization of conductive polyaniline/silica hybrid composites prepared by sol–gel process. Synth Met 110:17–23. doi:10.1016/S0379-6779(99)00176-9
Jia W, Segal E, Kornemandel D, Lamhot Y, Narkis M, Siegmann AA (2002) Polyaniline–DBSA/organophilic clay nanocomposites: synthesis and characterization. Synth Met 128:115–120. doi:10.1016/S0379-6779(01)00672-5
Jiang J, Li L, Xu F (2007) In situ synthesis and characterization of LiNi0.5La0.08Fe1.92O4–polyaniline core–shell nanocomposites. J Phys Chem Solids 68:1656–1662. doi:10.1016/j.jpcs.2007.04.007
Jiang J, Li L, Zhu M (2008) Polyaniline/magnetic ferrite nanocomposites obtained by in situ polymerization. React Funct Polym 68:57–62. doi:10.1016/j.reactfunctpolym.2007.10.010
Khairy M, Gouda ME (2015) Electrical and optical properties of nickel ferrite/polyaniline nanocomposite. J Adv Res 6:555–562. doi:10.1016/j.jare.2014.01.009
Khanna PK, Singh N, Charan S, Viswanath AK (2005) Synthesis of Ag/polyaniline nanocomposite via an in situ photo-redox mechanism. Mater Chem Phys 92:214–219. doi:10.1016/j.matchemphys.2005.01.011
Kickelbick G (2003) Concepts for the incorporation of inorganic building blocks into organic polymers on a nanoscale. Prog Polym Sci 28:83–114. doi:10.1016/S0079-6700(02)00019-9
Kim BH, Jung JH, Hong SH, Joo J, Epstein AJ, Mizoguchi K, Choi HJ (2002) Nanocomposite of polyaniline and Na+-montmorillonite clay. Macromolecules 35:1419–1423. doi:10.1021/ma010497c
Long Y, Chen Z, Duvail JL, Zhang Z, Wan M (2005) Electrical and magnetic properties of polyaniline/Fe3O4 nanostructures. Phys B 370:121–130. doi:10.1016/j.physb.2005.09.009
MacDiarmid AG (2001) “Synthetic metals”: a novel role for organic polymers. Curr Appl Phys 1:269–279. doi:10.1016/S0379-6779(01)00508-2
Mo TC, Wang HW, Chen SY, Yeh YC (2008) Synthesis and dielectric properties of polyaniline/titanium dioxide nanocomposites. Ceram Int 34:1767–1771. doi:10.1016/j.ceramint.2007.06.002
Mouritz AP, Gibson AG (2006) Fire reaction properties of composites. Fire Prop Polym Compos Mater 143:59–101. doi:10.1007/978-1-4020-5356-6_3
Najar MH, Majid K (2013) Synthesis, characterization, electrical and thermal properties of nanocomposite of polythiophene with nanophotoadduct: a potent composite for electronic use. J Mater Sci Mater Electron 24:4332–4339. doi:10.1007/s10854-013-1407-8
Posudievsky OY, Biskulova SA, Pokhodenko VD (2002) New polyaniline–MoO3 nanocomposite as a result of direct polymer intercalation. J Mater Chem 12:1446–1449. doi:10.1039/B107909C
Rafiqi FA, Rather MS, Majid K (2013) Doping polyaniline with copper bisglycinate [Cu(gly)2]—synthesis, characterization and thermal study. Synth Met 171:32–38. doi:10.1016/j.synthmet.2013.03.009
Rahman MA, Kumar P, Park DS, Shim YB (2008) Electrochemical sensors based on organic conjugated polymers. Sensors 8:118–141. doi:10.3390/s8010118
Ramya G, Renugadevi C, Rao CR, Trivedi DC (2008) Investigations on pyridine-3-sulphonic acid doped polyaniline and polypyrrole: metal loading through dopant molecules. React Funct Polym 68:701–709. doi:10.1016/j.reactfunctpolym.2007.11.009
Rather MS, Majid K, Wanchoo RK, Singla ML (2013) Nanocomposite of Polyaniline with the photoadduct of potassium hexacyanoferrate and pyridine ligand: structural, electrical, mechanical and thermal study. Synth Met 179:60–66. doi:10.1016/j.synthmet.2013.07.010
Rather MS, Majid K, Wanchoo RK, Singla ML (2014) Role of photoadduct of K4Fe(CN)6 and C3H4N2 in improving thermal stability of polyaniline composite. J Therm Anal Calorim 117:611–619. doi:10.1007/s10973-014-3834-z
Sathiyanarayanan S, Azim SS, Venkatachari G (2007) Preparation of polyaniline–TiO2 composite and its comparative corrosion protection performance with polyaniline. Synth Met 157:205–213. doi:10.1016/j.synthmet.2007.01.012
Shi L, Wang X, Lu L, Yang X, Wu X (2009) Preparation of TiO2/polyaniline nanocomposite from a lyotropic liquid crystalline solution. Synth Met 159:2525–2529. doi:10.1016/j.synthmet.2009.08.056
Song F, Shen X, Liu M, Xiang J (2011) Preparation and magnetic properties of SrFe12O19/Ni0.5Zn0.5 Fe2O4 nanocomposite ferrite microfibers via sol–gel process. Mater Chem Phys 126:791–796. doi:10.1016/j.matchemphys.2010.12.042
Stejskal J, Sapurina I, Trchová M (2010) Polyaniline nanostructures and the role of aniline oligomers in their formation. Prog Polym Sci 35:1420–1481. doi:10.1016/j.progpolymsci.2010.07.006
Stilwell DE, Park SM (1988) Electrochemistry of conductive polymers III. Some physical and electrochemical properties observed from electrochemically grown polyaniline. J Electrochem Soc 135:2491–2496. doi:10.1149/1.2095364
Wang H, Yi G, Zu X, Qin P, Tan M, Luo H (2016) Photoelectric characteristics of the p–n junction between ZnO nanorods and polyaniline nanowires and their application as a UV photodetector. Mater Lett 162:83–86. doi:10.1016/j.matlet.2015.09.128
Xu JC, Liu WM, Li HL (2005) Titanium dioxide doped polyaniline. Mater Sci Eng C 25:444–447. doi:10.1016/j.msec.2004.11.003
Yu S, Xi M, Han K, Wang Z, Yang W, Zhu H (2010) Preparation and photoelectrocatalytic properties of polyaniline/layered manganese oxide self-assembled film. Thin Solid Films 519:357–361. doi:10.1016/j.msec.2004.11.003
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Naqash, W., Majid, K. Structural, optical, electrical, and thermal properties of PANI/[Co(NH3)2(C2H8N2)2]Cl3 nanocomposite. Chem. Pap. 71, 525–533 (2017). https://doi.org/10.1007/s11696-016-0093-4
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s11696-016-0093-4