Abstract
The thermal conductivities of as-sprayed yttria-stabilized zirconia thermal barrier coating prepared by atmospheric plasma spraying at different temperatures are investigated based on quantitative microstructural analysis. Multiple linear regression is used to develop quantitative models which describe the relationship between multiple elements such as porosity, grain boundary density, monoclinic phase content, temperature and thermal conductivity. Results reveal that the thermal conductivity of the coating is mainly determined by the porosity and grain boundary density below 300 °C and by the monoclinic phase content above 800 °C. Furthermore, based on the significance testing analysis, the confidence interval under a confidence level of 95% at different temperatures enables researchers to predict the thermal conductivity based on microstructural information.
Similar content being viewed by others
References
M. Belmonte, Advanced Ceramic Materials for High Temperature Applications, Adv. Eng. Mater., 2006, 8(8), p 693-703
N.P. Padture, M. Gell, and E.H. Jordan, Applications Thermal Barrier Coatings for Gas—Turbine Engine, Science, 2002, 296(5566), p 280-284
C.G. Levi, Emerging Materials and Processes for Thermal Barrier Systems, Curr. Opin. Solid State Mater. Sci., 2004, 8(1), p 77-91
S. Guo and Y. Kagawa, Isothermal and Cycle Properties of EB-PVD Yttria-Partially-Stabilized Zirconia Thermal Barrier Coatings at 1150 and 1300 C, Ceram. Int., 2007, 33(3), p 373-378
R. Rajendran, Gas Turbine Coatings—An Overview, Eng. Fail. Anal., 2012, 26, p 355-369
P.K. Wright and A.G. Evans, Mechanisms Governing the Performance of Thermal Barrier Coatings, Curr. Opin. Solid State Mater. Sci., 1999, 4(3), p 255-265
Z. Wang, A. Kulkarni, S. Deshpande, and T. Nakamura, Effects of Pores and Interfaces on Effective Properties of Plasma Sprayed Zirconia Coatings, Acta Mater., 2003, 51(18), p 5319-5334
W. Chi, S. Sampath, and H. Wang, Microstructure-Thermal Conductivity Relationships for Plasma-Sprayed Yttria-Stabilized Zirconia Coatings, J. Am. Ceram. Soc., 2008, 91(8), p 2636-2645
L. Hu, C.A. Wang, Z. Hu, S. Lu, C. Sun, and Y. Huang, Porous Yttria-Stabilized Zirconia Ceramics with Ultra-Low Thermal Conductivity. Part II: Temperature Dependence of Thermophysical Properties, Surf Coat Technol, 2011, 46(3), p 623-628
A. Kocjan and Z. Shen, Colloidal Processing and Partial Sintering of High-Performance Porous Zirconia Nanoceramics with Hierarchical Heterogeneities, J. Eur. Ceram. Soc., 2013, 33(15), p 3165-3176
F. Cernuschi, I.O. Golosnoy, P. Bison, A. Moscatelli, R. Vassen, H.P. Bossmann, and S. Capelli, Microstructural Characterization of Porous Thermal Barrier Coatings by IR Gas Porosimetry and Sintering Forecasts, Acta Mater., 2013, 61(1), p 248-262
H. Xie, Y.C. Xie, G.J. Yang, C.X. Li, and C.J. Li, Intrasplat Cracks, J. Therm. Spray Technol., 2013, 22(8), p 1328-1336
S. Wei, W. Fu-chi, F. Qun-Bo, and M. Zhuang, Effects of Defects on the Effective Thermal Conductivity of Thermal Barrier Coatings, Appl. Math. Model., 2012, 36(5), p 1995-2002
G. Bertrand, P. Bertrand, P. Roy, R. Catherine, and M. Rémy, Low Conductivity Plasma Sprayed Thermal Barrier Coating Using Hollow PSZ Spheres: Correlation Between Thermophysical Properties and Microstructure, Surf. Coat. Technol., 2008, 202(10), p 1994-2001
F. Cernuschi, P. Bianchi, M. Leoni, and P. Scardi, Thermal Diffusivity/Microstructure Relationship in Y-PSZ Thermal Barrier Coatings, J. Therm. Spray Technol., 1999, 8(1), p 102-109
B.K. Jang, J.G. Sun, S.W. Kim, Y.S. Oh, and H.T. Kim, Characterization of the Thermal Conductivity of EB-PVD ZrO2-Y2O3 Coatings with a Pulsed Thermal Imaging Method, Surf. Coat. Technol., 2012, 207, p 177-181
R. Kicsiny, Multiple Linear Regression Based Model for Solar Collectors, Sol. Energy, 2014, 110, p 496-506
C.Y. Lee, M.K. Tippett, S.J. Camargo et al., Probabilistic Multiple Linear Regression Modeling for Tropical Cyclone Intensity, Mon. Weather Rev., 2015, 143(3), p 933-954
E. Pourbasheer, R. Aalizadeh, and M.R. Ganjali, QSAR Study of mGlu5 Inhibitors by Genetic Algorithm-Multiple Linear Regressions, Med. Chem. Res., 2014, 23(6), p 3082-3091
R.E. Taylor, Thermal Conductivity Determinations of Thermal Barrier Coatings, Mater. Sci. Eng. A, 1998, 245(2), p 160-167
B. Forsthuber, U. Müller, A. Teischinger, and G. Grüll, Chemical and Mechanical Changes During Photooxidation of an Acrylic Clear Wood Coat and its Prevention Using UV Absorber and Micronized TiO2, Ploym. Degrad. Stab., 2013, 98(7), p 1329-1338
C. Kramer, C.S. Tautermann, D.J. Livingstone, D.W. Salt, D.C. Whitley, B. Beck, and T. Clark, Sharpening the Toolbox of Computational Chemistry: A New Approximation of Critical F-Values for Multiple Linear Regression, J. Therm. Spray Technol., 2008, 49(1), p 28-34
R.W. Trice, Y.J. Su, J.R. Mawdsley, K.T. Faber, A.R. De Arellano-López, H. Wang, and W.D. Porter, Effect of Heat Treatment on Phase Stability, Microstructure, and Thermal Conductivity of Plasma-Sprayed YSZ, J. Mater. Sci., 2002, 37(11), p 2359-2365
S. Krämer, S. Faulhaber, M. Chambers, D.R. Clarke, C.G. Levi, J.W. Hutchinson, and A.G. Evans, Mechanisms of Cracking and Delamination Within Thick Thermal Barrier Systems in Aero-Engines Subject to Calcium-Magnesium-Alumino-Silicate (CMAS) penetration, Mater. Sci. Eng. A, 2008, 490(1), p 26-35
J. Wang, Y. Zhou, X.Y. Chong, R. Zhou, and J. Feng, Microstructure and Thermal Properties of a Promising Thermal Barrier Coating: YTaO4, Ceram. Int., 2016, 42(12), p 13876-13881
Z. Tian, L. Zheng, J. Wang, P. Wan, J. Li, and J. Wang, Theoretical and Experimental Determination of the Major Thermo-Mechanical Properties of RE2SiO5 (RE = Tb, Dy, Ho, Er, Tm, Yb, Lu, and Y) for Environmental and Thermal Barrier Coating Applications, J. Eur. Ceram. Soc., 2016, 36(1), p 189-202
Acknowledgments
Financial support is provided by the National Key Technologies R&D Program of China (2016YFA0201103), Engineering case study in extreme conditions using system mechanics approach (XDB22010202), Shanghai Technical Platform for Testing and Characterization on Inorganic Materials (14DZ2292900) and Key Research Program of Frontier Science, CAS.
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Chen, N., Song, X., Liu, Z. et al. Quantitative Analysis of the Relationship Between Microstructures and Thermal Conductivity for YSZ Coatings. J Therm Spray Tech 26, 745–754 (2017). https://doi.org/10.1007/s11666-017-0542-9
Received:
Revised:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s11666-017-0542-9