Abstract
In this work, 24CrNiMo alloy steel specimens were successfully prepared using laser direct metal deposition (LMD). The relationships between their microstructure, residual stress, as well as their thermal fatigue and wear properties for different types of treatments were then investigated. The treatments included quenching and tempering (QT), and stress relief annealing (SR) of the prepared samples. The study provided clear evidence that grain refinement was achieved after the QT and SR treatments. The hardness for the as-deposited specimens was found to be 325-380 HV0.2, while for the samples obtained after the QT and SR treatments, their values were obtained to be about 390 HV0.2 and 355 HV0.2, respectively. In comparison to the as-deposited samples, the QT treated specimens were reduced from a larger tensile stress of 176 ± 96 MPa to − 14 ± 5 MPa, while the SR specimens were reduced from 176 ± 96 MPa to − 44 ± 10 MPa. The microstructure and residual stress transformation resulted in improved wear resistance and thermal fatigue properties of the specimens, where the wear weights of the as-deposited specimens were about 13 and 3.7 times higher than that for the QT and SR processed specimens. Overall, a significant improvement in the mechanical properties of the QT treated specimens was achieved.
Similar content being viewed by others
References
G. Liu, C. Huang, S. Sun, and W. Wang, Effect of Microstructure on High-Speed Cutting Modified Anti-fatigue Performance of Incoloy A286 and Titanium Alloy TC17, Int. J. Adv. Manuf. Tech., 2021, 113, p 1–12. (In English)
L. Peng, P. Tao, M. Yingqi, L. Zijian, G. Qi, Z. Conglin, J. Yunxue, G. Qingfeng, and C. Jie, Microstructure and Properties of CoCrFeNiMo0.2 High-Entropy Alloy Enhanced by High-Current Pulsed Electron Beam, Surf. Coat. Tech., 2021, 2021(410), p 126911. (In English)
F.Z. Wang, C.H. Zhang, X. Cui, F.Q. Zhou, S. Zhang, H.T. Chen, and J. Chen, Effect of Energy Density on the Defects, Microstructure, and Mechanical Properties of Selective-Laser-Melted 24CrNiMo Low-Alloy Steel, J. Mater. Eng. Perform., 2022, 31, p 1–15. (In English)
X. Cui, S. Zhang, C.H. Zhang, J. Chen, J.B. Zhang, and S.Y. Dong, A Comparison on Microstructure Features of 24CrNiMo Low Alloy Steel Prepared by Selective Laser Melting and Laser Melting Deposition, Vacuum, 2021, 191, p 110394. (In English)
C. Lin, C. Suiyuan, W. Mingwei, G. Qian, L. Jing, L. Changsheng, and W. Mei, Study of Surface Topography Detection and Analysis Methods of Direct Laser Deposition 24CrNiMo Alloy Steel, Opt. Laser. Technol., 2021, 135, p 106661. (In English)
X. Kang, S. Dong, P. Men, X. Liu, S. Yan, H. Wang, and B. Xu, Microstructure Evolution and Gradient Performance of 24CrNiMo Steel Prepared via Laser Melting Deposition, Mater. Sci. Eng. A, 2020, 777, p 139004. (In English)
H. Bartys, J.D. Guerin, M. Watremez, and J.P. Bricout, A Comparative Study of Plasma Sprayed Coatings on Railway Brake Discs, Surf. Eng., 2001, 17(2), p 127. (In English)
H. Stephan, Investigation of a Ceramic Metal Matrix Composite Functional Surface Layer Manufactured Using Gas Tungsten Arc Welding, Cranfield University, Cranfield, 2014. (In English)
J.D. Guerin, J.P. Bricout, K. Laden, and M. Watremez, High Thermal Diffusivity Materials for Railway Brake Discs, Tribol. Lett., 1997, 3(3), p 257–267. (In English)
Q. Mi, Y. Huang, W. Guo, D. He, G. He, L. Zhou, Z. Xing, and H. Wang, Mechanical and Electrical Properties of Sodium Potassium Niobate Ceramic Coating by Plasma Spraying, Ferroelectrics, 2023, 603(1), p 12. (In English)
D. Chenggang, C. Xu, J. Jianqiang, and Z. Ping, Effects of Substrate Preheating Temperatures on the Microstructure, Properties, and Residual Stress of 12CrNi2 Prepared by Laser Cladding Deposition Technique, Materials (Basel, Switzerland), 2018, 11(12), p 2401. (In English)
S. Li, H. Xiao, K. Liu, W. Xiao, Y. Li, X. Han, J. Mazumder, and L. Song, Melt-Pool Motion, Temperature Variation and Dendritic Morphology Of Inconel 718 During Pulsed- and Continuous-Wave Laser Additive Manufacturing: A Comparative Study, Mater. Design, 2017, 119, p 351–360. (In English)
L. Ming, W. Hua, S. Xin, and S. Fanghong, Effect of Doping Level on Residual Stress, Coating-Substrate Adhesion and Wear Resistance of Boron-Doped Diamond Coated Tools, J. Manuf. Process., 2023, 88, p 145–156. (In English)
Y.M. Wang, H.D. Zhang, J.S. Ju, and Y.D. Fu, Influence of Welding Residual Stress on Ultra-Low Cycle Fatigue Properties of Beam-Column Joints in Steel Frame, Strength Mater, 2022, 54(4), p 734–746. (In English)
G. Christophe, B.J. Christophe, H. Robin, L. Fabien, and J. Thomas, Effects of Channel Contour Laser Strategies on Fatigue Properties and Residual Stresses of Laser Powder Bed Printed Maraging Steel, Int. J. Adv. Manuf. Technol., 2022, 123(9–10), p 3109–3120. (In English)
C.M. Smudde, C.W. San Marchi, M.R. Hill, and J.C. Gibeling, Effects of Residual Stress on Orientation Dependent Fatigue Crack Growth Rates in Additively Manufactured Stainless Steel, Int. J. Fatigue, 2023, 169, p 107489.
Z. Hongbo, L. Yongxin, Y. Fengping, B. Qiang, L. Yinglai, Z. Xiaoyong and F. Hongfeng, Effect of Local Heat Treatment on Residual Stresses in an In-service Repair Welded Pipeline, Mater. Test., 2022, 64(9), p 1255–1262. (In English)
K. Deenadayalan, V. Murali, A. Elayaperumal, and S. Arulvel, Effective Role of Short Time Furnace Heat Treatment and Laser Treatment on the Residual Stress and Mechanical Properties of NiCrBSi–WC Weldments Produced Using Plasma Transferred Arc Welding Process, J. Mater. Res. Technol., 2021, 15, p 3492–3513. (In English)
H. Yaghi, Becker, Sun, Finite Element Simulation of Welded P91 Steel Pipe Undergoing Post-weld Heat Treatment, Sci. Technol. Weld. Join., 2011, 16(3), p 232–238. (In English)
P. Li, Y. Gong, C. Liang, Y. Yang, and M. Cai, Effect of Post-heat Treatment on Residual Stress and Tensile Strength of Hybrid Additive and Subtractive Manufacturing, Int. J. Adv. Manuf. Technol., 2019, 103(5–8), p 2579–2592. (In English)
X. Kang, S. Dong, H. Wang, S. Yan, X. Liu, and B. Xu, Effects of Y Content on Laser Melting-Deposited 24CrNiMo Steel: Formability, Microstructural Evolution, and Mechanical Properties, Mater. Design, 2020, 188(1), p 108. (In English)
X. Zhao, S. Dong, S. Yan, X. Liu, Y. Liu, D. Xia, Y. Lv, P. He, B. Xu, and H. Han, The Effect of Different Scanning Strategies on Microstructural Evolution to 24CrNiMo Alloy Steel During Direct Laser Deposition, Mater. Sci. Eng. A, 2020, 771(C), p 138557.
Z. Zhang, Q. Wang, S. Dong, Z. Yu, Q. Zhang, P. Zhang, X. Wang, B. Zhang, X. Li, Y. Liang, and L. Ren, The Effect of Carbon Fiber Strengthening on the Mechanical Properties and Wear Resistance of 24CrNiMo Alloy Steel Fabricated by Laser Deposition, J. Mater. Res. Technol., 2020, 9(4), p 9117–9128. (In English)
Y. Dahui, Z. Ti, Z. Hong, X. Yao, Z. Peng, and Y. Yuying, Effects of Angle Formation Between Melted Zone and Friction Direction on Thermal Fatigue and Wear Resistance of Truck Drum Brake, Proc. Inst. Mech. Eng., 2021, 235(5), p 1297–1307. (In English)
W. Zhang, Z. Dong, H. Kang, C. Yang, and X. Peng, Effect of Various Quenching Treatments on Microstructure and Mechanical Behavior of a Laser Additively Manufactured 12CrNi2 Alloy Steel, J. Mater. Process. Technol., 2021, 288, p 116907. (In English)
Z. Yongsheng and D. Chenggang, Effect of Heat Treatment on Microstructure and Properties of 24CrNiMo Alloy Steel Formed by Selective Laser Melting (SLM), Materials, 2021, 14(3), p 631–631. (In English)
B. Arivazhagan, S. Sundaresan, and M. Kamaraj, Effect of TIG arc Surface Melting Process on Weld Metal Toughness of Modified 9Cr-1Mo (P91) Steel, Mater. Lett., 2008, 62, p 2817–2820. (In English)
R.J. Moat, A.J. Pinkerton, L. Li, P.J. Withers, and M. Preuss, Residual Stresses in Laser Direct Metal Deposited Waspaloy, Mater. Sci. Eng. A, 2011, 528(6), p 2288–2298. (In English)
Y.C. Tsui and T.W. Clyne, An Analytical Model for Predicting Residual Stresses in Progressively Deposited Coatings Part 1: Planar Geometry, Thin Solid Films, 1997, 306(1), p 23–33. (In English)
A. Malekahmadi and M. Honarpisheh, Investigation of Shot Blasting and Thermal Stress Relieving Processes on Residual Stresses and Corrosion Behavior of X60 Steel Gas Pipelines, SN Appl. Sci., 2020, 2(9), p 1023–1032. (In English)
P.J. Withers and H.K.D.H. Bhadeshia, Residual Stress. Part 1–Measurement Techniques, Mater Sci Tech Lond, 2001, 17(4), p 355–365. (In English)
B. Breidenstein, B. Denkena, J. Vetter, and B. Richter, Influence of the Residual Stress State of Coatings on the Wear Behavior in External Turning of AISI 4140 and Ti–6Al–4V, Prod. Eng. Res. Dev., 2016, 10(2), p 147–155. (In English)
W. Zhenyu, Z. Guangming, Y. Jiwang, C. Xiang, L. Huanbao, and Y. Xianhai, Effect of TiAlSiN Coating Residual Stress on Its Sliding Wear and Cutting Wear Performance, Int. J. Adv. Manuf. Technol., 2022, 123(11–12), p 3885–3900. (In English)
J. Yang, P. La, W. Liu, and Q. Xue, Tribological Properties of FeAl Intermetallics Under Dry Sliding, Wear, 2003, 257(1), p 104. (In English)
J. Yang, P. La, W. Liu, J. Ma, and Q. Xue, Tribological Properties of Fe 3 Al–Fe 3 AlC 0.5 Composites Under Dry Sliding, Intermetallics, 2005, 13(11), p 1184. (In English)
E.V. Puymbroeck, W. Nagy, K. Schotte, Z. Ul-Abdin, and H.D. Backer, Determination of Residual Welding Stresses in a Steel Bridge Component by Finite Element Modeling of the Incremental Hole-Drilling Method, Appl. Sci., 2019, 9(3), p 536. (In English)
X.-K. Meng, J.-Z. Zhou, C.S. Huang, K.-Y. Luo, J. Sheng, and W. Tan, Residual Stress Relaxation and Its Effects on the Fatigue Properties of Ti6Al4V Alloy Strengthened by Warm Laser Peening, Mater. Sci. Eng. A, 2017, 680, p 297–304. (In English)
Author information
Authors and Affiliations
Corresponding authors
Additional information
Publisher's Note
Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.
Rights and permissions
Springer Nature or its licensor (e.g. a society or other partner) holds exclusive rights to this article under a publishing agreement with the author(s) or other rightsholder(s); author self-archiving of the accepted manuscript version of this article is solely governed by the terms of such publishing agreement and applicable law.
About this article
Cite this article
Zhao, Y., Liu, Y., Ding, C. et al. Effect of Microstructure and Residual Stress on the Wear Resistance and Thermal Fatigue of 24CrNiMo Alloy Steel Formed Using Laser Direct Metal Deposition. J. of Materi Eng and Perform (2023). https://doi.org/10.1007/s11665-023-08689-5
Received:
Revised:
Accepted:
Published:
DOI: https://doi.org/10.1007/s11665-023-08689-5