Abstract
It is still unclear whether the effects of the electric current on the mechanical behavior can be attributed exclusively to Joule heating. To evaluate athermal effect of electropulsing on recovery, we compared mechanical behavior, dislocation density, and hardness of a pre-tensioned magnesium alloy after treatment of electric pulses (EP) and annealing in an oil bath. The analysis reveals that the athermal effect of EP on the recovery is not clearly identified under a given set of conditions in this study, although EP treatment appears more efficient than conventional heat treatment. This is further supported by the in situ transmission electron microscopy results that little dislocation rearrangement was observed even during the high current density of 4000 A/mm2 as long as temperature remains low.
Similar content being viewed by others
References
[1] Byeong-Chan Suh, Myeong-Shik Shim, K.S. Shin, and Nack J. Kim: Scr. Mater., 2014, vol. 84-85, pp. 1-6.
[2] Se-Jong Kim, Chang Dong Yim, Young-Seon Lee, Jong-Hun Yoon, and Jung Hwan Lee: Mater. Sci. Eng. A, 2014, vol. 596, pp. 216-21.
[3] Jun Rui Xu, Hai Ping Yu, JunJia Cui, and Chun Feng Li: Mater. Sci. Eng. A, 2013, vol. 569, pp. 150-58.
[4] Xinsheng Huang, Yasumasa Chino, Mamoru Mabuchi, and Mikio Matsuda: Mater. Sci. Eng. A, 2014, vol. 611, pp. 152-61.
[5] J T Roth, I Loker, D Mauck, M Warner, S F Golovashchenko, and A Krause: Trans. North Am. Manuf. Res. Inst. SME, 2008, vol. 36, pp. 405-12.
C.R. Green, T.A. McNeal, and J.T. Roth: Trans. North Am. Manuf. Res. Inst. SME, 2009, vol. 37, pp. 403-10.
[7] Joshua J. Jones, Laine Mears, and John T. Roth: J. Manuf. Sci. Eng., 2012, vol. 134, p. 34504.
[8] Rong Fan, James Magargee, Ping Hu, and Jian Cao: Mater. Sci. Eng. A, 2013, vol. 574, pp. 218-25.
[9] Moon-Jo Kim, Keunho Lee, Kyu Hwan Oh, In-Suk Choi, Hyeong-Ho Yu, Sung-Tae Hong, and Heung Nam Han: Scr. Mater., 2014, vol. 75, pp. 58-61.
[10] James Magargee, Fabrice Morestin, and Jian Cao: J. Eng. Mater. Technol., 2013, vol. 135, p. 41003.
[11] Jae-Hun Roh, Jeong-Jin Seo, Sung-Tae Hong, Moon-Jo Kim, Heung Nam Han, and John T. Roth: Int. J. Plast., 2014, vol. 58, pp. 84-99.
[12] Krishnaswamy Hariharan, Myoung-Gyu Lee, Moon-Jo Kim, Heung Nam Han, Daeyong Kim, and Seogou Choi: Metall. Mater. Trans. A, 2015, vol. 46, pp. 3043-51.
[13] O A Troitskii: ZhETF Pisma Redaktsiiu, 1969, vol. 10, p. 18.
[14] M Molotskii and V Fleurov: Phys. Rev. B, 1995, vol. 52, pp. 15829-34.
[15] Hans Conrad: Mater. Sci. Eng. A, 2000, vol. 287, pp. 276-87.
[16] K. Okazaki, M. Kagawa, and H. Conrad: Scr. Metall., 1978, vol. 12, pp. 1063-68.
[17] P.D. Goldman, L.R. Motowidlo, and J.M. Galligan: Scr. Metall., 1981, vol. 15, pp. 353-56.
JJ Jones and JT Roth: 2009 ASME Int. Manuf. Sci. 2009, pp. 1-10.
[19] C. Li, K.F. Zhang, S.S. Jiang, and Z.P. Zhao: Mater. Des., 2012, vol. 34, pp. 170-78.
[20] G. Liu, J. Zhou, and J. Duszczyk: J. Mater. Process. Technol., 2007, vol. 186, pp. 191-99.
[21] Robert William Kerr Honeycombe: The Plastic Deformation of Metals, 2nd ed., Edward Arnold, London, 1984.
H. Çimenoğlu and E.S. Kayali: Scr. Metall. Mater., 1990, vol. 24, pp. 2437-42.
[23] J. Geng and J.F. Nie: Scr. Mater., 2015, vol. 100, pp. 78-81.
G.T Hahn: Acta Metall., 1962, vol. 10, pp. 727-38.
G.K Williamson and W.H Hall: Acta Metall., 1953, vol. 1, pp. 22-31.
[26] Zhen Sheng Xu, Zu Han Lai, and Yong Xian Chen: Scr. Metall., 1988, vol. 22, pp. 187-90.
[27] P. Yiu, C.H. Hsueh, and C.H. Shek: J. Alloys Compd., 2016, vol. 658, pp. 795-99.
[28] Hans Conrad: Mater. Sci. Eng. A, 2002, vol. 322, pp. 100-107.
Wesley Salandro, Joshua Jones, Cristina Bunget, Laine Mears, and John Roth: Electrically Assisted Forming: Modeling and Control, Springer, 2014.
Acknowledgment
This study was financially supported by the Fundamental Research Program of the Korea Institute of Materials Science (KIMS).
Author information
Authors and Affiliations
Corresponding authors
Additional information
Manuscript submitted June 20, 2016.
Electronic Supplementary Materials
Below is the link to the electronic supplementary material.
Rights and permissions
About this article
Cite this article
Kim, SJ., Kim, SD., Yoo, D. et al. Evaluation of the Athermal Effect of Electric Pulsing on the Recovery Behavior of Magnesium Alloy. Metall Mater Trans A 47, 6368–6373 (2016). https://doi.org/10.1007/s11661-016-3804-0
Received:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s11661-016-3804-0