Abstract
An effective and just industrial transition is necessary both to mitigate climate change and protect jobs, and as a precursor to enable other sectors to decarbonise. Activity is at an early stage and examples of successful sector-wide interventions to decarbonise industry do not yet exist. Governments of industrialised countries are beginning to develop policy and provide funding to support deployment of carbon capture and low-carbon hydrogen infrastructures into high-emitting industrial clusters, but options for sites outside of clusters, denoted here as ‘dispersed sites’, are also required. This paper takes a mixed methods approach to provide the first analysis of the issues facing dispersed industrial sites on their route to decarbonisation and to suggest solutions to the challenges they face. Using the UK as a case study, it first characterises dispersed sites in terms of location, emissions released, sectors involved, and size of companies affected. It then shows how these features mean that simply expanding the geographical scope of the present UK decarbonisation strategy, which focuses on the provision of carbon capture and low-carbon hydrogen, would face a number of challenges and so will need to be broadened to include a wider range of abatement options and other considerations to meet the needs of dispersed sites. While the solutions for each place will be different, these are likely to include some combination of the expansion of shared infrastructure, the development of local zero-carbon hubs, research into a wider range of novel abatement technologies and facilitating local participation in energy planning. The paper concludes with a discussion of remaining knowledge gaps before outlining how its findings might apply to industrial decarbonisation strategies in other countries.
Similar content being viewed by others
Avoid common mistakes on your manuscript.
Introduction
Energy-intensive industry accounted for 38% of total global final energy use in 2021 and directly emitted a quarter of global CO2 emissions (IEA 2022). The sector has been historically characterised as ‘hard to abate’ facing numerous technical and commercial barriers to decarbonisation. These include long investment cycles, high energy use, low profit margins and trade exposure (Bataille 2020). Nonetheless, industrial materials provide the building blocks upon which the net-zero transition will be based (IEA 2020) and the sector employs 23% of workers globally (World Bank 2021). An effective and just industrial transition is, therefore, necessary both to mitigate climate change and protect jobs, and as a precursor to enable other sectors to decarbonise.
Typically, energy-intensive sectors, such as metals and minerals; chemicals; paper and pulp; glass; and oil refineries, co-locate close to geographically anchored resources such as transport and hydrocarbon infrastructures (John St. and Pouder 2006). This geographical concentration allows for the development of a skilled local workforce and specialised supply chains, and provides the potential for knowledge networks to develop amongst clustered firms (Porter 2011). As the transition from fossil fuels accelerates, steered by national decarbonisation pledges, and given impetus by Russia’s invasion of Ukraine, activity on industrial decarbonisation has begun to move from debates about technical feasibility towards the deployment of low-carbon infrastructure into energy-intensive clusters. To this end, several major economies including the United Kingdom, Canada and the Netherlands are providing funding to support the deployment of hydrogen and carbon capture usage and storage (CCUS) demonstration projects into high-emitting industrial clusters and engaging in policy and business model experimentation to reduce carbon emissions (IEA 2021). Underpinning this activity is the hope that the economies of scale, opportunities for joint efficiencies and potential for shared learning provided by clusters will kick-start the industrial transition, anchoring early demand and fostering an initial market for low-carbon technologies (The Government of Canada 2020; Government of the Netherlands 2019; HM Government 2021a).
The UK was the first major economy to publish an industrial decarbonisation strategy in 2021 (HM Government 2021a). The headline ambition is to establish four low-carbon industrial clusters by 2030 and at least one fully net-zero cluster by 2040. Achieving this will require deploying CCUS into these clusters, capturing 6 MtCO2 of industrial emissions per year by 2030 (HM Government 2021b). In support of this ambition, the Government has launched an Industrial Decarbonisation Challenge (IDC), which is providing £210 million to support the UK’s six largest industrial clusters in their mission to decarbonise at scale. Phase 1 of the cluster sequencing process is complete with two coastal clusters in the north-east and north-west of England announced as ‘Track-1’ clusters, to be prioritised for CCUS and hydrogen deployment in the mid-2020s. As of late 2022, a shortlist of the CO2 emitter projects to connect to these clusters has been released as Phase 2 of this process (BEIS 2022a).
However, as we will show in this paper, industrial clusters provide only half of the picture when it comes to industrial decarbonisation. This is literally true in the UK where almost half of industrial emissions come from dispersed sites, broadly defined in policy documents as “industrial sites located outside of industrial clusters” (HM Government 2021a, p. 158). Such sites are less likely to be geographically concentrated and many of them are less emissions intensive than those in the clusters, making the economics of building future hydrogen and carbon capture networks more challenging. Nonetheless, they too will require rapid decarbonisation to meet the UK’s Net-Zero Strategy goals of reducing industrial emissions by 43–53% by 2030, and 63–76% by 2035, compared to 2019 levels, and the long-term ambition of a 87–96% reduction in 2050 compared to 2019 (HM Government 2021b). To date, however, the strategy for emissions reductions in dispersed sites has been largely limited to a focus on resource efficiency and energy efficiency (REEE) with an undertaking to “explore opportunities for faster decarbonisation of dispersed sites in the 2020s” (HM Government 2021b, p. 120).
As global activity on industrial decarbonisation gathers pace, now is an appropriate moment to ask what approaches might work to decarbonise dispersed sites. Decarbonising industry is not solely a technical challenge. The industrial transition is a sociotechnical process made up of multiple co-evolving elements, which incorporates markets, value chains, infrastructures, policies and social practices (Köhler et al. 2019). To date, however, the literature has tended to focus either on high level, cross-economy decarbonisation scenarios or roadmaps for a single sector or technology (Schneider et al. 2020) that in most cases concentrate on techno-economic factors but neglect the social and justice dimensions of transition (Johnson et al. 2021).
To complement and expand upon these studies, we apply a mixed methods approach incorporating quantitative data analysis and qualitative stakeholder analysis to explore both technical and social factors. Using the UK as an exploratory case study (Yin 2014), we address the following research objectives. First, to characterise dispersed industry in terms of the sectors and organisations involved and explore the implications for policy action. Second, to evaluate whether there is sufficient data available to enable decision-makers to set a strategy for emissions reductions in dispersed sites. Third, to examine the options available to dispersed sites to decarbonise across the different sectors. Our fourth objective is to synthesise these findings into a discussion of the implications for the UK’s industrial decarbonisation ambitions. Finally, we identify what these lessons might mean for industrial decarbonisation strategies globally. Our findings suggest that parallel industrial decarbonisation strategies will be needed for clusters and dispersed sites if we are to avoid market distortions, carbon leakage and the risk of an uneven transition that leaves some places unable to decarbonise.
The remainder of the paper is structured as follows. First, we introduce the literature as it relates to industrial decarbonisation and note the present lack of studies that cover dispersed sites. Then, in the second section, we introduce our materials and methods. In “Results”, we address objectives one to three, establishing the barriers and opportunities for the decarbonisation of dispersed industrial sites. In “Discussion”, we address our fourth and fifth research objectives to discuss the potential risks that the UK approach presents to its ambitions to decarbonise industry and the lessons for industrial decarbonisation strategies internationally. Finally, in “Conclusions”, we conclude with limitations and suggestions for further research.
Decarbonising industry from ‘hard to abate’ to thinking beyond clusters
The energy transition is a geographical process, requiring the reconfiguration of current patterns of economic and social activity (Bridge et al. 2013). To date, however, there has been little focus on how these dynamics might affect industry. This is likely because the imperative to achieve deep decarbonisation of industry is a relatively recent development, driven by the 2015 Paris Agreement objective to reach net-zero emissions by mid-century (Bataille et al. 2021). Prior to the Paris Agreement, industry was subject to less stringent requirements in recognition of the technical challenges to abatement that the sector faced. Since the Paris Agreement, inaction by industry is no longer an option. One consequence of this historical disparity is that understanding of industrial decarbonisation has lagged other sectors (Bataille et al. 2018). While the field is beginning to mature, at present, the focus remains on how to decarbonise specific industrial sectors, and the required technical interventions to do so, rather than the challenges and consequences of implementing these interventions into industrial areas.
Hence, since 2015, there has been a substantial body of work detailing overarching decarbonisation pathways for energy-intensive industry (Gerres et al. 2019; Nurdiawati and Urban 2021; Bataille 2020) and for specific energy-intensive sectors such as steel (Richardson-Barlow et al. 2022; Skoczkowski et al. 2020; Venkataraman et al. 2022); cement (Abdelshafy et al. 2022; Hills et al. 2016); chemicals (Griffin et al. 2018b); paper and pulp (Griffin et al. 2018a; Rahnama Mobarakeh et al. 2021); glass (Del Rio et al. 2022b; Griffin et al. 2021); lime (Simoni et al. 2022); food and drink (Atuonwu and Tassou 2021; Sovacool et al. 2021); ceramics (Ibn-Mohammed et al. 2019; Del Rio et al. 2022a); and refining (Nurdiawati and Urban 2022). In addition, there is a growing body of work on the potential for single decarbonisation interventions to abate emissions across a range of industrial sectors, and the associated opportunities and challenges of this approach. These studies consider the ‘big ticket’ interventions of CCUS (see for example: Alcalde et al. 2019; Massol et al. 2018; Meckel et al. 2021; Pilorgé et al. 2020; Waxman et al. 2021) and hydrogen (see for example: Affery et al. 2021; Edwards et al. 2021; Griffiths et al. 2021; Kakoulaki et al. 2021; Kazi et al. 2021), but also, the impact of REEE approaches. This work incorporates both modelling studies, which describe methodologies for quantifying the environmental benefits of various sustainability interventions, such as resource integration, circular economy and industrial symbiosis initiatives (see for example: Ahmed et al. 2021; Noori et al. 2021; Steubing et al. 2020) and also, the indicator frameworks by which the benefits of these interventions could be measured (Hu et al. 2005; Turgel et al. 2020).
There is, however, comparatively little research on deep-decarbonisation scenarios for specific industrial regions (Samadi et al. 2018) and those studies which have sought to do so (see for example: Martin 2020; Roelfes et al. 2018; Samadi et al. 2018; Schneider and Lechtenböhmer 2018; Schneider et al. 2020; Steubing et al. 2020) generally focus upon the industrial belt of North-West Europe which, while significant in its environmental impact, is not necessarily representative of how industry is distributed globally. It is apparent from existing studies that regional initiatives that take into account the conditions, infrastructures and linkages specific to particular areas will play a key role in enabling transformative industrial change (Martin 2020; Roelfes et al. 2018), but the circumstances that will enable or prevent this change remain under-researched. As industrial decarbonisation moves from planning into implementation, an emerging body of work has begun to critically engage with the real-world implications of this societal change (see for example: Devine-Wright 2022; Gough and Mander 2022; Upham et al. 2022). To date, however, the focus of these studies has been on the decarbonisation of industrial clusters. In this paper, we begin to think beyond clusters to address the challenges and opportunities of decarbonising dispersed sites.
To do so, it is helpful to first consider how we might categorise the different types of industrial, but not densely clustered, regions where dispersed industry is located. While typologies of industrial districts (Markusen 1999) and clusters (Boja 2011) are well established, and typologies of regions to inform the development of renewable energy strategies have been proposed (Lutz et al. 2017), a typology of industrial regions in terms of their decarbonisation potential, has yet to be defined. As Roelfes et al. (2018) note in their analysis of the top twenty greenhouse gas-emitting regions in Europe, there are significant differences between these regions, in terms of their economic structure, proximity to urban settlements, proportion of jobs in fossil fuel extraction, education levels, wealth and administrative arrangements. They conclude, “high-carbon industry regions are not all the same with regard to their socio-economic settings, leading to different capacities to drive low-carbon transitions” (Roelfes et al. 2018, p. 22).
In the absence of an established typology, the three-part categorisation developed by Tödtling and Trippl (2005) in their study of regional innovation policy provides a starting point for analysis. The authors characterise three regional types: old industrial regions, fragmented metropolitan regions and peripheral regions in terms of their main innovation capacities and challenges. Old industrial regions are dominated by large firms and mature industries, and are often characterised by technological and political lock-in. Metropolitan regions are highly diverse, but a lack of coordination and weaker networks can lead to fragmentation. Peripheral regions are characterised by institutional thinness and a lack of support organisations meaning innovation remains at a low level. While innovative capacity is only part of the picture when it comes to regional industrial decarbonisation (Roelfes et al. 2018), understanding industrial clusters as examples of old industrial regions, and dispersed sites as more often located in metropolitan and peripheral regions provides a heuristic framework to develop our understanding of the challenges and opportunities of decarbonising dispersed industry.
Materials and methods
A mixed methods approach was used to characterise dispersed industrial sites across the United Kingdom in terms of their sector, emissions, location and potential abatement options, together with information regarding the drivers and barriers for decarbonisation.
The qualitative data draw upon 30 stakeholder interviews conducted between July 2021 and November 2022. Interviews were conducted with experts from across the industrial decarbonisation domain, including representatives from energy-intensive sector organisations and firms, industrial clusters, trade unions, local and regional authorities, and think tanks. We undertook a purposive sampling approach (Robinson 2014) to select our informants based on their knowledge and experience of present UK initiatives to decarbonise industry, with a particular focus on those who had already begun to engage with the issues facing dispersed sites. Interviewees were identified through attending industrial decarbonisation webinars and workshops and through internet searches. We expanded upon this initial group through snowball sampling (Parker et al. 2019) where we asked interviewees to recommend other people in their networks who were working on relevant issues, continuing until data saturation was reached (Gaskell and Bauer 2000). Our findings were triangulated by attendance at public meetings and industry conferences, and discussions with policy actors (Carter et al. 2014). A summary of our participants is provided in Table 1.
Interviews took place online and lasted between 35 and 60 min. They took a semi-structured format in which interviewees were asked about the background to industrial decarbonisation in their sector, area or research field; the details of any decarbonisation initiatives they were working on and their experience of the process to date; and their opinions of how effective the present policy was in enabling industrial decarbonisation and how the field might develop. Interviews were audio recorded, transcribed and then thematically analysed using Nvivo 12 to identify the issues facing dispersed sites and the risks and opportunities presented by current policy. This process took a ‘zigzagging’ approach (Emmel 2013) to move between theory and data as findings were first identified and then refined.
The quantitative data for dispersed industrial sites were initially based on the industrial sector classification, site location information and emissions estimates contained in the Net-Zero Industry Pathways (N-ZIP) model (Element Energy 2020), which draws on the UK’s National Atmospheric Emissions Inventory (NAEI 2022). The N-ZIP model has been used by the UK government to explore possible decarbonisation pathways for UK industry (HM Government 2021a), with a detailed analysis of the sensitivity of the model to changes in key assumptions undertaken by the UK Energy Research Centre (Gailani et al. 2021). The location of these dispersed industrial sites was then mapped using MATLAB.
The range of potential abatement options suitable for each industrial sector was identified using the N-ZIP data on energy use and emissions for each process as a starting point. A literature review was then conducted to identify alternative mitigation options that could be used to decarbonise the particular process. The options are categorised as shown in Fig. 1. The key options considered included feedstock substitution, fuel/energy switching (except hydrogen) and novel process changes. Hydrogen and CCUS options were then considered for those sectors for which the review found limited alternative decarbonisation options. This was to account for the fact that the deployment of hydrogen and CCUS infrastructure to enable the decarbonisation of dispersed sites is likely to face significant technical and economic barriers. The technical maturity of the abatement options was assessed using Technology Readiness Levels (TRLs). In some cases, where the information source for the technology did not explicitly provide the TRL, the UK government guidance on TRLs was used to categorise the technologies based on the description provided (UK Government 2014).
Results
Characteristics of dispersed industry in the UK
In this section, we characterise UK dispersed industrial sites in terms of their location, level of emissions released, the diversity of the sectors involved and the size of companies affected. We argue that these characteristics mean that in many parts of the UK, dispersed sites may require a broader mitigation strategy to the present government approach to the industrial clusters, which is focussed on large-scale hydrogen and CCUS infrastructure interventions.
Dispersed sites are defined as those located more than 25 km (radial distance) from a major UK industrial cluster point. The total emissions from dispersed UK industrial sites are approximately 37.5 MtCO2e and can be disaggregated by sector and site type (pointFootnote 1 and non-point sourceFootnote 2) as depicted in Table 2. The data suggest two issues that may hamper the decarbonisation efforts of the UK’s dispersed industry.
First, nearly half of the emissions come from industries that are energy intensive (cement, refining, paper, glass, lime, waste processing and non-ferrous metals). This makes their decarbonisation challenging due to the use of high-temperature heat processes for which there are currently limited abatement options. Those options that are available typically rely on using hydrogen or carbon capture, both of which are likely to require significant investment in new or upgraded infrastructure to be feasible. Furthermore, in the present, early stages of industrial decarbonisation, the economics of carbon capture and hydrogen projects are premised upon the presence of one or more ‘anchor projects’ and ‘anchor loads’ (Australian Hydrogen Council 2021; Global CCS Institute 2016)—highly emitting industrial installations that will provide a sufficient volume of CO2 and/or demand for hydrogen to kick-start development. It is for this reason that clusters have become the crucible for industrial decarbonisation. Dispersed industrial sites, by contrast, are often not geographically concentrated, meaning the economics of building these new infrastructures are likely to be attractive for only the highest emitting sectors and sites, such as cement. For the remainder, as the Industrial Decarbonisation Strategy (HM Government 2021a) acknowledges, geographical dispersal will make access to hydrogen and CO2 networks harder and less cost-effective. In the longer term, if technology costs for carbon capture drop and wider system changes, such as repurposing the gas grid for hydrogen, go ahead, then access to these technologies may improve. In the short term, however, many dispersed sites will have access to fewer decarbonisation options than their clustered counterparts, leading to the potential for market distortions and regional inequalities, particularly if product standards begin to mandate the use of low-carbon products.
Second, the other half of the emissions come from non-energy-intensive industries characterised by many small emitters, with a wide diversity of production processes, for which electrification would in principle be an easier abatement route than either hydrogen or carbon capture. However, this will require the necessary electrical technologies to be both available and commercially viable and may also require the electricity network to be upgraded to support the extra demand.
The broad range of dispersed sectors makes it challenging for industry representatives to give a clear message when engaging with policymakers. These issues have come to the fore in metropolitan industrial areas like Bradford, a city in West Yorkshire and one of the earliest industrial towns in the UK. The area retains a strong industrial base, and the sector contributes significantly to the local economy, providing 12% of local employment compared to 8% nationally (City of Bradford MDC 2020). It is also an area of significant deprivation ranking as the fifth most income-deprived local authority in England (City of Bradford MDC 2019). The city has identified the need to engage proactively with the green industrial agenda in order to support economic regeneration and avoid businesses relocating elsewhere (The Bradford Economic Partnership 2021). In common with many industrialised areas in the UK, there is no single industrial cluster: industry is dispersed throughout the city. There are few highly energy-intensive sites, and no one sector predominates: rather there is a mosaic of industrial sites including vehicle manufacturing, aerospace, chemicals, textiles and food and drink. As a site manager in the city noted, this diversity presents challenges when engaging with government officials more used to thinking in terms of coastal megaclusters dominated by one or two highly emitting anchor sites.
We have gone to BEIS [Department of Business Energy and Industrial Strategy] and said, “Look, guys. Here’s our proposal for how do we try to match what you’re doing in terms of offering support with diverse industrial bases like Bradford and tapping into the wider manufacturing base here, and here’s our proposal on how to do it. So will you support us here?” Because there isn’t an obvious funding stream for us to do that.
Interviewees from the Black Country, another metropolitan area with a long history of industrial activity, shared similar reflections about the emerging inequalities caused by a government focus on coastal clusters. The Black Country is located in the West Midlands, an inland area of the UK that is home to over 3000 energy-intense manufacturing businesses. As a result of its industrial heritage, metal processing remains the biggest sector of the local economy in terms of employment (Black Country LEP 2020) but, as for Bradford, activity is dispersed across the region rather than clustered in any one place. Initiatives are underway to protect and build upon local industrial strengths but as a representative of the regional Energy Capital Partnership commented, the geographical location of the region places it at a disadvantage that would not be easy to overcome: “national energy policy has very little benefit to the urban centres like the West Midlands. […] Your opportunities are all coastal.”
Another issue with the potential to hamper the decarbonisation efforts of the UK’s dispersed industry is the split between point source sites that represent nearly 53% of the total emissions, and non-point source sites that represent the other 47%. Non-point source sites can be particularly challenging to decarbonise since they are mostly owned by small and medium enterprises (Make UK 2022) defined in the UK as any organisation that has fewer than 250 employees and a turnover of less than €50 million, or a balance sheet total less than €43 million (Foreign Commonwealth and Development Office 2022). This is a particular issue for the food and drink sector where representatives estimated that over 95% of businesses were small and medium enterprises SMEs, individually small operations which in aggregate contribute to making the sector one of the most highly emitting (Table 2); but, it was also noted as an issue for the ceramics, metal processing and chemicals industries.
Here, interviewees noted the challenges that SMEs face, first in terms of not having the capital to invest in low-carbon technologies but also more broadly in facing a knowledge gap both about the decarbonisation options available to them (see also “Understanding decarbonisation pathways for dispersed sites”) and how they might obtain supporting funding. This complexity was challenging for larger organisations with dedicated staff, they argued, leaving SMEs with little chance of being able to engage. As a food and drink sector representative noted, “even the very big companies, they’ll have an energy manager but even they won’t have the full suite of technologies in their minds. Let alone smaller companies, of which food and drink is full.”
A lack of resources, lack of expertise and the high capital costs are well-documented barriers to SMEs implementing sustainability measures (Álvarez Jaramillo et al. 2019); however, in the case of industrial decarbonisation, the issues have been exacerbated by a lack of obvious intermediaries to bridge these gaps. While the designated track-1 and track-2 clusters have cluster organisations to represent their interests to government, no similar organisations exist for dispersed sites in either metropolitan or peripheral areas. During interviews, participants suggested three ways to address this issue, but none of the options provides a complete solution. Sector organisations could play a role in collating information and highlighting it to their members, but their coverage was not total, and SMEs were less likely than larger organisations to be members. Nationally funded regional initiatives such as England’s Net-Zero Hubs provided an alternative channel. There are five hubs in total—North West, North East and Yorkshire, Midlands, South West, and Greater South East—that between them cover all of England. Funded through the Local Net-Zero Programme, they were set up by BEIS to promote best practice and support local authorities to develop net-zero projects that can attract commercial investment (HM Government 2021b). However, the number of SMEs involved presented a significant logistical burden, particularly given the hubs’ limited funding.
That creates a bit of a challenge for us […] if there’s 50,000 small businesses that we want to try and decarbonise, compared to going out to the 18 large industry sites, it creates just an issue of marketing and getting the information and comms out there.
Energy Hub Representative
Finally, in metropolitan areas, Combined Authorities, regional bodies made up of two or more local government areas with a mandate to address economic regeneration, provided a third option to engage with SME manufacturing firms. In theory, Combined Authorities, with their enhanced convening power and regional vision, offer a ready-made forum to engage with regionally significant issues such as decarbonising dispersed industrial sites. But while in some areas, like the West Midlands, the Combined Authority had set up an Energy Capital Partnership with industry within its remit, in other areas the Combined Authority’s focus on industry was less pronounced. As the Energy Hub Representative continued: “On the Combined Authority side, traditionally, and I’d say very much still, we are a transport organisation […] And there just aren’t the links, as you mentioned, or the resources to focus on industry.” Similar points about a lack of in-house expertise and connections with industry on the part of Combined Authorities were made by some sector representatives, who felt the consequent reliance on outsourcing was not always helpful in assisting them to decarbonise:
We’ve had dealings with quite a few of the Combined Authorities, and the frustration we have is that they come out with these plans, and they usually pay a consultant. […] I’m not really sure the value of all these Combined Authorities, going away, paying a consultant, without consulting with industries.
Representative Glass sector
Furthermore, Combined Authorities cover only ten metropolitan areas in England, which in total produce approximately 20% of dispersed site emissions (Fig. 2). Therefore, even if they were to lead on this issue, it would leave many places without an obvious coordinating body (Fig. 2).
Location of the UK dispersed sites by sector and emissions in MtCO2e mapped against Combined Authority areas, based on the data from (Element Energy 2020)
When it comes to decarbonisation, therefore, industries in dispersed sites find themselves disadvantaged in four ways when compared to their cluster counterparts. First, by a lack of suitable funding streams; second, by limited access to decarbonisation infrastructures and technologies; third, by a lack of internal expertise, due in part to the high proportion of SMEs affected, and finally, due to a lack of intermediary organisations to bridge the gap between regional policy and local implementation. This risks growing market distortions as some sectors and places are able to decarbonise and some are not. Since all industry is required to decarbonise, irrespective of site and industry type, to achieve deep decarbonisation of the UK industry by 2050, in the following sections we map out the potential pathways that would enable this to occur.
Understanding decarbonisation pathways for dispersed sites
The UK government's modelling of a net-zero pathway for UK industry, as depicted in Fig. 3, shows that industrial sites—including dispersed sites—are expected to rely mainly on hydrogen and CCUS to decarbonise energy use, along with REEE to reduce the demand for such energy inputs. This result is predicated on the existence of extensive infrastructure networks for CO2 and hydrogen transport and storage across the country to make these abatement options widely available to dispersed industry. However, as discussed in “Characteristics of dispersed industry in the UK”, such extensive coverage of hydrogen and CCUS infrastructure faces a number of challenges, and significant national coverage seems unlikely in the medium term. Therefore, different mitigation options—at least in the short to medium term—such as electrification or the use of biomass may have a greater role in decarbonising dispersed sites than currently envisaged by the Government’s scenario (Gailani et al. 2021; Frontier economics 2021).
UK government's decarbonisation pathway for UK industry, national networks scenario (HM Government 2021a). Note: contains public sector information licensed under the Open Government Licence v3.0
One reason for the UK government scenario relying substantially on the use of hydrogen and CCUS technologies to reach net zero may be an incomplete representation of alternative decarbonisation options in the N-ZIP model used to create the pathway. Whereas hydrogen and CCUS are, in principle, applicable widely across many industrial sectors, the alternative abatement options are often sector or process specific and some are not yet commercially available, at least in part as a result of not having been given the same attention or support by government. While the N-ZIP model accounts for the infrastructure costs needed for dispersed sites, it does not treat them separately to clusters in terms of the decarbonisation options that are available.
For instance, dispersed cement sites may rely on novel mitigation options for dispersed sites (beyond CCUS) such as reducing the clinker to cement ratio using different cementitious raw materials (Gartner and Sui 2018), which reduces the process emissions that largely come from clinker production. Similarly, processes that can use decarbonised electricity, such as high-temperature industrial heat pumps, electric steam crackers and microwave-assisted drying, may have important roles in the future for decarbonising food and drink, chemicals and paper sites, respectively, and these technologies are currently missing from the N-ZIP model (Rademaker and Marsidi 2019; Rattanadecho and Makul 2016; Doughty 2022).
Lack of data on industrial decarbonisation options was a prominent theme that emerged from the interviews. Interviewees believed this gap had been caused by two factors, neither of which was specific to the UK. First, a focus within national governments on modelling the options for the heaviest emitting sectors and places. This was driven by the urgency of action on industrial decarbonisation, and the need to prioritise government funding streams given the high costs of the required infrastructure. This focus, however, had the potential to generate unintended consequences. As a member of an intergovernmental energy organisation reflected, “it’s amazing to me how much of the fiscal conversation ends up being led by what is modelled, because that really shouldn’t be the case. We should be trying to model everything equally.” In practice, however, modelling tended to focus on the heaviest emitting sectors of steel, cement and chemicals, all of which require hydrogen and CCUS, to the detriment of many of the other sectors that make up industry within dispersed sites.
The second factor which exacerbated this issue was a lack of available data on industry at the regional and local levels which, were it available, could inform conversations with government. Historically, the management of industrial strategy has not fallen within the purview of local authorities, meaning there is little institutional capacity to engage with the issue and a lack of knowledge about the location and processes of less highly emitting installations. A member of a global cities network described industrial decarbonisation as something of a “blind spot” within their work, while a UK representative of an environmental think tank member described the situation as follows, “More locally, well, I was talking to the CCC [climate change committee]. I think there’s just a lack of very detailed knowledge on where industry is, particularly when you’re looking broadly, including the long tail.”
While our research identified several local authorities in England that had recognised this issue and were proactively undertaking initiatives to map their local industrial sectors, it was apparent that the identified initiatives were in metropolitan areas that had the necessary vision and institutional capacity to engage. Not all local authorities were equally able to engage with these challenges and interviewees were not optimistic that this situation would rectify itself, particularly given worsening economic conditions. A second think tank member noted, “We’re very far away in this country, I think now, from having local authorities which do more ambitious things, as opposed to local authorities which basically are trying to deliver their statutory services without going under.”
Enablers for dispersed industry
Having characterised the nature of dispersed industrial sites in the UK and the issues they are facing, in this section, we set out some possible ways to accelerate their decarbonisation. Four areas are highlighted: the potential for shared infrastructure; the implementation of low-carbon hubs; the development and deployment of alternative abatement options; and improved governance arrangements. In practice, these are not separate interventions, rather industrial areas are likely to draw from several of them in order to decarbonise their sectors.
Shared infrastructure
To investigate the possibility of dispersed industrial sites benefiting from shared decarbonisation infrastructure such as CO2 and hydrogen transport and storage, information on their location and sector was mapped using a Geographical Information System (Fig. 4). The sites are widely distributed across the country making it difficult to create regionalised infrastructure projects, particularly since sites with similar infrastructure needs are not necessarily close to each other (see, for instance, cement and lime sites). Some dispersed sites are ‘truly dispersed’ that is, located far away from major cluster points (dotted circles in Fig. 4) and have very few, if any, other sites nearby. However, creating ‘mini’ clusters in middle, south, north-west of England, east of Northern Ireland and South Wales may provide opportunities for shared infrastructure that would provide access to suitable abatement options, while reducing the costs of decarbonisation.
Location of the UK dispersed sites by sector and emissions scale in MtCO2e, (Oval shape) is a UK cluster point, based on the data from Element Energy (2020)
Low-carbon hubs
Given the diversity of dispersed industrial sites, both in terms of sector and organisation type (“Characteristics of dispersed industry in the UK”), and the range of mitigation options appropriate to each sector, the optimal decarbonisation approach for each place will vary. This means a place-based approach to industrial decarbonisation is needed, focussed on infrastructures and interventions bespoke to the local industrial base. The task is not straightforward, due in part to the lack of data on dispersed sites (“Understanding decarbonisation pathways for dispersed sites”); however, two government-funded initiatives provide a possible template for other areas to follow, although work is at an early stage of development.
The first of these is the clean growth hub (CGH) concept which forms one strand of the South Wales Industrial Cluster’s decarbonisation strategy (SWIC 2022). The aim of the CGH is to integrate future business operations with an existing industrial anchor site, to allow for the sharing of waste heat, material symbiosis and the development of low-carbon energy centres, both to enable fuel switching and to provide a single emissions point for future deployment of CCUS (Energy Forum 2021). In addition, there is the potential to integrate heat sharing with domestic heat networks. Present exploratory work is focussing upon the Port of Barry where an existing chemicals’ cluster is in place. However, the concept is at an early stage and will require funding, stakeholder engagement and a yet-to-be identified strategic actor to take the project forward (Associated British Ports 2022).
Arguably, the zero-carbon hubs (ZCHs) approach being piloted in the Black Country (UKRI 2021) provides a more radical approach. Here, the aim is to reconfigure the existing local industrial base through supporting local businesses to proactively relocate into a new type of industrial park—the ZCH. Each ZCH will be designed around decarbonising the anchor industrial processes that are specific to the region’s core industries: in the Black Country, metal processing. Present work is focussed upon developing four demonstration hubs, each to contain a mix of local businesses selected to maximise opportunities for industrial symbiosis, with plans to be operational by 2030. Each hub will also have its own energy centre, designed to deliver low-carbon heat and electricity, with options for generating hydrogen fuel in the future (Black Country LEP 2020). The work will be aligned with the infrastructure plans of district energy network operators and local transport planners to ensure their future investments align with the changing transport and energy demand which ZCH will entail. If piloting is successful and funding forthcoming, 10–50 ZCHs focussed on different industrial activities could be distributed across the Black Country, to decarbonise the local industrial base.
Developing a wider set of abatement options
In the absence of shared infrastructure options, Table 3 provides an overview of some of the key mitigation options that could be relevant to dispersed sites, but which are often overlooked as they are currently not commercially or widely available. The Technology Readiness Level (TRL) ranges in Table 3 reflect the range of the technologies suitable to decarbonise the sector. For instance, for waste processing, there are several CCUS technologies to decarbonise the sector such as those based on amine scrubbers and molten carbonate fuel cells, with different TRLs (AECOM 2022).
Dispersed sites belonging to the food and drink, paper, non-ferrous metals, other chemicals and other industry sectors may benefit most from decarbonising the electricity and heat currently provided by natural-gas-fired combined heat and power (CHP) and steam boiler technologies. CHP technologies can use biomass or hydrogen fuels, while electric boilers and heat pumps can be used to satisfy the heat demand instead of steam boilers, resulting in significant emission savings (Tagliaferri et al. 2018; Element Energy 2020).
Some novel electrification options are available to decarbonise high-temperature processes such as electric kilns (RotoDynamic Heater technology) for cement-making (Coolbrook 2022), electrical steam crackers for chemicals (Doughty 2022), electric glass furnace for glass making (Del Rio et al. 2022b) and microwave-assisted drying and electric kilns for ceramics (Besier and Marsidi 2020). Those technologies need further research, development and demonstration (RD&D) to bring them to market maturity. However, in contrast to hydrogen and CCUS, the UK has not yet introduced any RD&D funding programmes solely dedicated to developing decarbonisation options based on the use of electricity. Industries can apply for grant funding for feasibility and engineering studies for electrification options (UK Government 2022), but the UK has some of the highest electricity prices for industrial users amongst IEA reported countries (BEIS 2022b) meaning that many of the electrified technologies are not currently competitive routes to decarbonisation. However, there is significant pressure on the UK government from industry to reform electricity pricing, and a change of policy approach combined with a funding mechanism to support the additional operational and capital costs of electrification should incentivise deployment (Climate Change Committee 2022). Nevertheless, electrifying high-temperature industrial processes are still likely to require massive electricity network upgrading that will entail high costs and long planning times (Marquand 2022), introducing the potential for further regional inequalities if different places electrify their industry at different rates.
Alternative governance arrangements
Whatever route it takes, industrial decarbonisation will not occur without institutions and intermediary organisations to provide a regional vision and direction (Truffer and Coenen 2012; Martin 2020). The importance of regional networks in providing the supporting institutional infrastructures needed to promote innovation, facilitate cooperation between firms and public authorities, and manage environmental issues is well established in the broader industrial cluster literature (see for example: Refsgaard et al. 2021; Wang and Cao 2017; Zeng and Bathelt 2011). Conversely, a lack of integration between national and regional policy incentives; a lack of institutional platforms that span historically separate domains, such as municipal and industrial heat; and a lack of skilled individuals have all been identified as barriers to cluster initiatives achieving transformative change (Martin 2020). So far, however, these lessons have not been applied to dispersed sites.
To date, action on dispersed industrial sites in the UK has been driven by metropolitan areas with strong industrial identities but, to decarbonise the sector as a whole, concrete action is needed also in peripheral areas where our research uncovered little evidence of activity to date. This is particularly true when it comes to meeting the increased need for electricity, which will arise not only due to decarbonised industrial processes using electricity, but also from hydrogen production using electrolysis, and to power carbon capture plants. While low-temperature electrification technologies, such as heat pumps, are presented as one early option for fuel switching in dispersed sites (HM Government 2021a), in practice, the timescales for this will depend on the power capacity available on the electricity network. Local electricity network operators will need to accommodate not only the requirements for the industrial sector to electrify in any particular place, but also increased electricity demand from other sectors, such as domestic heating and transport, with overall demand forecast to double by 2050 (BEIS & Ofgem 2022). Without coordination between local, regional and ultimately national frameworks, dispersed industry in different areas will electrify at different rates, leading to the potential for further market distortion.
The UK, and in particular England, has long been unusually centralised in its approach to government (Heseltine 2012) and a formal regionalised approach to industrial strategy does not presently exist (Business Energy and Industrial Strategy Committee 2021). One solution could be an expanded role for local area energy plans (LAEP): “a data driven and whole energy system, evidence-based approach that is led by local government [and] developed collaboratively with defined stakeholders” (Energy Systems Catapult 2021, p. 8). LAEP provide a systematic means for local areas to identify the most effective way to meet their local net-zero target. However, at present, their implementation is piecemeal and, as critics note, local authorities will be unable to move to the delivery phase without allocated budgets (Citizens Advice 2021). Proponents of LAEP are calling for further action from national government to support local authorities in undertaking LAEP, to integrate energy planning with land use planning frameworks and, crucially, to clarify who is responsible at the sub-national level for coordinating energy planning across regions (Energy Systems Catapult 2022). The Levelling Up agenda, which was intended to address the UK’s entrenched regional inequalities through support for devolved powers, appeared to offer an opportunity to develop this new governance framework. However, while policy documents focussed on industry, such as The Ten Point Plan for a Green Industrial Revolution (HM Government 2020) and the Industrial Decarbonisation Strategy (HM Government 2021a), were enthusiastic about the potential for industrial decarbonisation to reinvigorate the UK’s industrial heartlands and level up the UK, the Levelling Up the United Kingdom White Paper (HM Government 2022) itself offered little new in the way of policy or funding to deliver this ambition. There is provision within the White Paper for a devolution framework that will provide local authorities “opportunity to adopt innovative local proposals to deliver action on climate change and the UK’s Net Zero targets” (HM Government 2022, p. 140). These could, in theory, be used to assist with regional LAEP coordination (Energy Systems Catapult 2022); however, it appears unlikely that many local authorities will take on this task without first being assigned formal responsibility and funding to do so.
Discussion
In the preceding sections, we have described some of the important characteristics of dispersed industry in the UK and the decarbonisation challenges that it faces. These challenges include: the geographical spread of industrial sites, the diversity of sectors involved, the small size and lack of capacity of many of the companies, incomplete information on appropriate abatement options and how these may vary with location, the low TRL of some electrification options combined with the high cost of electricity, uncertainty around the availability and planning of supporting infrastructure and a lack of institutional capacity and leadership at the local level. Some of these challenges are specific to the UK due to its highly centralised approach to decision-making, whereas other issues will be shared by countries around the world. Here, we discuss the implications of our findings in both cases.
Implications for the UK
The UK has historically had a centralised approach to decision-making in many areas including energy and emissions reduction. This philosophy has informed its approach to industrial decarbonisation but we argue the top-down approach used for decarbonising the major industrial clusters that focuses mainly on the deployment of hydrogen and CCUS is unlikely to be appropriate for the wider decarbonisation of UK industry. Rather a more complex and nuanced policy environment will be needed that recognises the diversity of sectors and company sizes, incentivises a wide range of abatement options, provides greater certainty on the roll-out of supporting infrastructure, strengthens local capacity to act and leverages the synergies between the decarbonisation of industry and other sectors at a local level.
The UK is one of the front-runners globally in addressing the challenge of achieving deep decarbonisation of industry. While there are examples of successful initiatives to address the environmental impact of industry in particular places (Perrucci et al. 2022; Tudor et al. 2007) and innovation is beginning to deliver fossil-free industrial products (Vetter 2021), international examples of well-established and successful approaches to decarbonise the entire industrial sector are not readily available. Further work is, therefore, needed by government and industry to develop a strategic approach that is appropriate to the UK’s situation. However, there are still some key gaps in our current knowledge that require further investigation to inform the UK’s strategy, some of which national government is best placed to lead on, others of which require a more localised approach.
Ensuring a diversity of abatement options are available to industry, together with publicly available data about them. The IDC is providing significant funding to develop and deploy hydrogen and CCUS technologies through activities that are focussed on the clusters. This will no doubt provide important learning about these decarbonisation approaches that will be relevant to dispersed industry. However, so far much less attention has been given to alternative decarbonisation options such as greater electrification and the direct use of biomass. Further work is, therefore, urgently needed to understand the potential for a menu of options to decarbonise high-temperature heat processes and numerous process-specific technologies across a range of sectors. This information could then be used to identify those technologies that require further RD&D to bring them to market and the best mechanisms to do this. This is an example of where national government could play a role through the provision of information on the range of abatement options that may be applicable to a particular sector. A recent review of the availability of industrial data concluded that it is not currently fit for purpose and that “there is an urgent need for a public data strategy which gathers linked data on emissions, technologies, and related environmental, social and economic impacts” (Norman et al. 2020).
Exploring the potential to group dispersed industry to support decarbonisation. A key challenge for dispersed industry is the availability of the supporting infrastructure to support decarbonisation, whether this be for electricity, hydrogen and/or CCUS. In the case of electricity, the challenge is having the necessary capacity in the network to support increased demand, which may involve both upgrading existing connections and possibly building new power lines. For hydrogen, the most likely options would be to repurpose the existing gas distribution infrastructure coupled with a new hydrogen transmission network. Unless hydrogen gains a significant share of demand in other sectors, it seems unlikely that a future hydrogen network will have anywhere near the geographical reach of natural gas. In the case of CO2, the building of pipelines and/or the development of a truck or ship transport network would be needed, and this is likely to be focussed on regions where significant CO2 capture makes them economically viable.
Two potentially complementary approaches have, therefore, been suggested. The first is to identify areas of significant industrial activity that have the potential to become “mini-clusters” and so be the focus for enhanced or new infrastructure development. Depending on the geographical spread of emissions within these mini-clusters, then the second approach would be to co-locate certain industries in low-carbon hubs thus allowing them to share the benefits of improved infrastructure availability and build upon synergies between different industrial processes. Further work is needed to identify which areas might form these mini-clusters and hubs and what infrastructure would be needed. This would need to be combined with an economic and social analysis of the desirability and acceptability of such an approach.
Building local capacity for facilitation and energy planning. The Government’s approach to decarbonising the large industrial clusters relies on groupings of industrial companies, public bodies, technology providers, research organisations, sector bodies and energy utilities coming together to form “projects” that can bid for government funding. This bottom-up, competitive approach may be appropriate when there are relatively few large organisations involved in a small number of projects. However, the challenge of decarbonising dispersed sites is likely to require a different organisational approach, with strong local leadership an important element. Historically, the UK system of governance has not supported this approach meaning that local action to identify dispersed sites and develop strategies for them is at present piecemeal and poorly resourced. There is currently a wide range of awareness and capacity at the local level about the need for decarbonisation in general and the specific challenges facing industry in particular. Some areas, such as the Black Country, have proactively engaged with the issue. Other areas lack obvious leadership and, therefore unless there are efforts to strengthen local capacity, are likely to fall behind in decarbonisation efforts. A patchwork approach at which different areas proceed with decarbonisation at different speeds is likely to introduce regional distortions with both winners and losers. Further work is needed to explore whether a more consistent local approach is possible and what kinds of organisations (existing and new) should be involved. A possible way forward in England may be to give industrial decarbonisation more visibility by including them in LAEP, if this approach has widespread use across the country.
International implications
Countries and regions will develop a pathway to industrial decarbonisation that is shaped by their existing infrastructures and sectors, policy priorities and resources. There is no one-size-fits-all approach. However, while the details of our analysis are UK specific, many of the challenges and potential solutions will be relevant in other countries. Some places, such as the Netherlands, have a highly centralised industrial structure ideally suited to cluster decarbonisation, and a dozen major energy-intensive businesses which collectively account for over 60% of CO2 emissions (Government of The Netherlands 2019). For countries where industrial emissions are distributed in this way, the development of local ZCH is arguably less pressing than in the UK where emissions are almost equally split between clusters and dispersed sites. Nonetheless, exploring alternative abatement options will remain an important area of research.
Other countries operate systems of government that provide greater opportunities for a regionally specific approach to the issue than are available to many areas in the UK. The German federal state of North Rhine-Westphalia (NRW) produces 15% of the EU’s primary steel and 15% of high-value base chemicals (Schneider and Lechtenböhmer 2018). In 2022, the NRW government launched NRW.Energy4Climate, a state company with responsibility to provide an integrated regional approach to decarbonising the energy, manufacturing building and transport sectors (NRW.Energy4Climate n.d). In places where institutions such as these exist, building additional local capacity for facilitation and energy planning may not be necessary but integrating different sectors into low-carbon hubs may still be required.
In industrialised nations, such as Japan and Australia, where hydrogen has been positioned as a cross-sector, society-wide vector for decarbonisation (COAG Energy Council 2019; Ministry of Economy Trade and Industry of Japan 2017), the location of hydrogen infrastructure may determine the sequence of industrial decarbonisation, rather than the location of industrial clusters determining where hydrogen is first deployed. Hence, we see Australia seeking to prioritise the development of hydrogen hubs that will aggregate users of hydrogen from industrial, transport and energy sectors into one place (COAG Energy Council 2019). Co-location provides the potential for the economies of scale, opportunities for joint efficiencies and shared learning. However, without an approach which also considers capacity and abatement options for areas outside of hubs, this approach also has the potential to introduce regional distortions.
Conclusions
This paper uses the example of the UK to highlight the importance of developing decarbonisation strategies for industry that go beyond the clusters of energy-intensive industries that currently receive most attention by both researchers and policymakers. We have characterised the nature of these dispersed industrial sites in terms of their number, geographical distribution, level of emissions, diversity of sectors and size of companies. We argue that a range of factors related both to the companies themselves and the environment in which they operate mean that the technologies and policies needed to support their decarbonisation needs to be significantly different to those used to decarbonise the large industrial clusters.
We found that the potential enablers to decarbonise dispersed sites are exploring the benefits of shared infrastructure across sites, the implementation of low-carbon hubs, the development of alternative novel abatement options (electrification options in particular) and improved governance arrangements, employing a more decentralised approach than has historically been the case in the UK.
Since our case is drawn from one country, the generalisability of our findings is necessarily limited. Nonetheless, the UK is one of the first major economies to begin implementing a national cluster decarbonisation programme and, because its industrial emissions are split almost evenly between clusters and dispersed sites, our findings provide an early indication of the challenges that may face the many other countries that possess a variety of more and less concentrated industrial areas. As work progresses, research into the specifics of how industrial decarbonisation is developing in particular countries and regions, and comparative studies between them, are likely to form a fruitful area of further study. Developing a more in-depth categorisation of industrial areas according to their sectoral make up, institutional capacity and appetite to engage with the industrial decarbonisation agenda will provide an important component of this analysis.
Industrial materials provide the building blocks upon which the net-zero transition will be based. Though the sector is hard to abate, there have been significant advances in our understanding of the task since the Paris Agreement was adopted. Industrial clusters are an obvious starting point in this work but, as we have shown, they are not the end point of the process. As work on industrial decarbonisation moves from planning into the implementation stage, it is time to begin thinking beyond clusters. In this paper, we provide a first step towards a more comprehensive analysis.
Data availability
All data underlying the results are available as part of the article and no additional source data are required.
Notes
Point source sites are sources of emissions, at known locations, and their emissions data are available from regulatory regimes and national or local authorities.
Non-point source sites are usually small emitters that do not fall under the UK emissions trading scheme and for which only the general location is inferred. They are represented in the map as a single site (point) in each UK region.
References
Abdelshafy A, Lambert M, Walther G (2022) The role of CCUS in decarbonizing the cement industry: a German case study. Energy insight 115. The Oxford Institute for Energy Studies. Available: https://a9w7k6q9.stackpathcdn.com/wpcms/wp-content/uploads/2022/05/Insight-115-The-role-of-CCUS-in-decarbonizing-A-german-case-study-.pdf
AECOM (2022) Review of next generation carbon capture technology for industrial, waste and power sectors
Affery AP, Tan JX, Ong IYB, Lim JY, Yoo C, How BS, Ling GHT, Foo DCY (2021) Optimal planning of inter-plant hydrogen integration (IPHI) in eco-industrial park with P-graph and game theory analyses. Process Saf Environ Prot 155:197–218
Ahmed RO, Al-Mohannadi DM, Linke P (2021) Multi-objective resource integration for sustainable industrial clusters. J Clean Prod 316:128237
Alcalde J, Heinemann N, Mabon L, Worden RH, de Coninck H, Robertson H, Maver M, Ghanbari S, Swennenhuis F, Mann I, Walker T, Gomersal S, Bond CE, Allen MJ, Haszeldine RS, James A, Mackay EJ, Brownsort PA, Faulkner DR, Murphy S (2019) Acorn: developing full-chain industrial carbon capture and storage in a resource- and infrastructure-rich hydrocarbon province. J Clean Prod 233:963–971
Álvarez Jaramillo J, Zartha Sossa JW, Orozco Mendoza GL (2019) Barriers to sustainability for small and medium enterprises in the framework of sustainable development—literature review. Bus Strateg Environ 28:512–524
Associated British Ports (2022) Future ports: Barry [Online]. Available: https://www.abports.co.uk/media/up4dk5s3/20220726-abp-barry-port-vision-v1-1-web-format.pdf. Accessed 15 Nov 2022
Atuonwu J, Tassou S (2021) Decarbonisation of food manufacturing by the electrification of heat: A review of developments, technology options and future directions. Trends Food Sci Technol 107:168–182
Australian Hydrogen Council (2021) Unlocking Australia’s hydrogen opportunity
Bataille CGF (2020) Physical and policy pathways to net-zero emissions industry. Wiley Interdiscipl Rev Clim Change 11(2):e633. https://doi.org/10.1002/wcc.633
Bataille C, Åhman M, Neuhoff K, Nilsson LJ, Fischedick M, Lechtenböhmer S, Solano-Rodriquez B, Denis-Ryan A, Stiebert S, Waisman H, Sartor O, Rahbar S (2018) A review of technology and policy deep decarbonization pathway options for making energy-intensive industry production consistent with the Paris Agreement. J Clean Prod 187:960–973
Bataille C, Nilsson LJ, Jotzo F (2021) Industry in a net-zero emissions world: new mitigation pathways, new supply chains, modelling needs and policy implications. Energy Clim Change 2:100059
BEIS (2022a) Cluster sequencing Phase-2: shortlisted projects (power CCUS, hydrogen and ICC) [Online]. Available: https://www.gov.uk/government/publications/cluster-sequencing-phase-2-eligible-projects-power-ccus-hydrogen-and-icc/cluster-sequencing-phase-2-shortlisted-projects-power-ccus-hydrogen-and-icc-august-2022. Accessed 28 Nov 2022a
BEIS (2022b) Quarterly energy prices: September 2022b [Online]. Available: https://assets.publishing.service.gov.uk/government/uploads/system/uploads/attachment_data/file/1107499/quarterly_energy_prices_uk_september_2022.pdf. Accessed 12 Nov 2022b
BEIS & OFGEM (2022) Electricity Networks Strategic Framework: Enabling a secure, net zero energy system [Online]. Available: https://assets.publishing.service.gov.uk/government/uploads/system/uploads/attachment_data/file/1096283/electricity-networks-strategic-framework.pdf. Accessed 26 Sept 2022
Besier J, Marsidi M (2020) Decarbonisation options for the Dutch Ceramic Industry. PBL/TNO (MIDDEN)
Black Country LEP (2020) Repowering the Black Country: a prospectus to lead a clean growth revolution in the UK
Boja C (2011) Clusters models, factors and characteristics. Int J Econ Pract Theor 1:34–43
Bridge G, Bouzarovski S, Bradshaw M, Eyre N (2013) Geographies of energy transition: space, place and the low-carbon economy. Energy Policy 53:331–340
Business Energy and Industrial Strategy Committee (2021) Post-pandemic economic growth: Industrial policy in the UK. House of Commons
Carter N, Bryant-Lukosius D, Dicenso A, Blythe J, Neville AJ (2014) The use of triangulation in qualitative research. Oncol Nurs Forum 41:545–547
Cerame Unie (2021) Ceramic roadmap to 2050
Citizens Advice (2021) Look before you LAEP Ending the postcode lottery of local area energy plans [Online]. Available: https://www.citizensadvice.org.uk/Global/CitizensAdvice/Energy/Local%20Energy%20Report.pdf. Accessed 25 Jan 2021
City of Bradford MDC (2019) Indices of deprivation 2019 [Online]. Available: https://ubd.bradford.gov.uk/media/1533/indices-of-deprivation-2019-on-the-day-alert.pdf. Accessed 11 Oct 2022
City of Bradford MDC (2020) About Bradford's economy [Online]. Available: https://www.bradford.gov.uk/business/bradford-economy/about-bradfords-economy/. Accessed 11 Oct 2022
Climate Change Committee (2022) Progress in reducing emissions, 2022 report to Parliament
COAG Energy Council (2019) Australia's national hydrogen strategy [Online]. Available: https://www.dcceew.gov.au/sites/default/files/documents/australias-national-hydrogen-strategy.pdf. Accessed 1 Dec 2022
Coolbrook (2022) RDH can replace the fossil fuels used in process heating [Online]. Available: https://coolbrook.com/technology/rdh/. Accessed 21 Nov 2022
del Rio DDF, Sovacool BK, Foley AM, Griffiths S, Bazilian M, Kim J, Rooney D (2022a) Decarbonizing the ceramics industry: a systematic and critical review of policy options, developments and sociotechnical systems. Renew Sustain Energy Rev 157:112081
Del Rio DDF, Sovacool BK, Foley AM, Griffiths S, Bazilian M, Kim J, Rooney D (2022) Decarbonizing the glass industry: a critical and systematic review of developments, sociotechnical systems and policy options. Renewable and Sustainable Energy Reviews 155: https://doi.org/10.1016/j.rser.2021.111885
Devine-Wright P (2022) Decarbonisation of industrial clusters: a place-based research agenda. Energy Res Soc Sci 91:102725
Doughty K (2022) Reimagining program design at DOE to accelerate transformative industrial technology deployment. American Council for an Energy Efficient Economy
Edwards RL, Font-Palma C, Howe J (2021) The status of hydrogen technologies in the UK: a multi-disciplinary review. Sustain Energy Technol Assess 43:100901
Element Energy (2020) Deep-decarbonisation pathways for UK industry. Climate Change Committee, London
Emmel N (2013) Sampling and choosing cases in qualitative research: a realist approach. Sage, New York
Energy Forum (2021) Developing a South Wales Industrial Cluster [Online]. Available: https://forum.all-energy.co.uk/wp-content/uploads/2021/03/SWIC-17th-march-2021.pdf. Accessed 15 Nov 2022
Energy Systems Catapult (2021) The future of local area energy planning in the UK. UKRI
Energy Systems Catapult (2022) Building a governance framework for coordinated Local Area Energy Planning. UKRI
Foreign Commonwealth and Development Office (2022) Small to medium sized enterprise action plan [Online]. Available: https://assets.publishing.service.gov.uk/government/uploads/system/uploads/attachment_data/file/1049055/FCDO_SME_Action_Plan_Jan_2022.pdf. Accessed 17 Oct 2022
Frontier Economics (2021) Accelerating the decarbonisation of industrial clusters and dispersed sites [Online]. Available: https://www.aldersgategroup.org.uk/content/uploads/2022/03/Accelerating-the-Decarbonisation-of-Industrial-Clusters-and-Dispersed-Sites.pdf. Accessed 19 Oct 2022
Gailani, A, Cooper, S, Allen, S, Taylor, P & Simon, R 2021, Sensitivity Analysis of Net Zero Pathways for UK Industry. UK Energy Research Centre (UKERC). Available: https://purehost.bath.ac.uk/ws/portalfiles/portal/233636994/UKERC_WP_Sensitivity_Analysis_of_Net_Zero_Pathways_for_UK_Industry.pdf
Gartner E, Sui T (2018) Alternative cement clinkers. Cem Concr Res 114:27–39
Gaskell GD, Bauer MW (2000) Towards public accountability: beyond sampling, reliability and validity. In: Gaskell GD, Bauer MW (eds) Qualitative researching with text, image and sound. Sage, London
Geels FW (2022) Conflicts between economic and low-carbon reorientation processes: insights from a contextual analysis of evolving company strategies in the United Kingdom petrochemical industry (1970–2021). Energy Res Soc Sci 91:102729
Gerres T, Chaves Ávila JP, Llamas PL, San Román TG (2019) A review of cross-sector decarbonisation potentials in the European energy intensive industry. J Clean Prod 210:585–601
Global CCS Institute (2016) The global status of CCS. Special report: understanding industrial CCS hubs and clusters. Melbourne, Australia.
Gough C, Mander S (2022) CCS industrial clusters: Building a social license to operate. Int J Greenhouse Gas Control 119:103713
Government of The Netherlands (2019) National climate agreement. Netherlands
Griffin PW, Hammond GP, Norman JB (2018a) Industrial decarbonisation of the pulp and paper sector: a UK perspective. Appl Therm Eng 134:152–162
Griffin PW, Hammond GP, Norman JB (2018b) Industrial energy use and carbon emissions reduction in the chemicals sector: A UK perspective. Appl Energy 227:587–602
Griffin PW, Hammond GP, McKenna RC (2021) Industrial energy use and decarbonisation in the glass sector: a UK perspective. Adv Appl Energy 3:100037
Griffiths S, Sovacool BK, Kim J, Bazilian M, Uratani JM (2021) Industrial decarbonization via hydrogen: a critical and systematic review of developments, socio-technical systems and policy options. Energy Res Soc Sci 80:102208
Heseltine M (2012) No stone unturned: in pursuit of growth [Online]. Available: https://www.gov.uk/government/publications/no-stone-unturned-in-pursuit-of-growth. Accessed 21 Apr 2021
Hills T, Florin N, Fennell PS (2016) Decarbonising the cement sector: a bottom-up model for optimising carbon capture application in the UK. J Clean Prod 139:1351–1361
HM Government (2020) The ten point plan for a green industrial revolution [Online]. Available: https://assets.publishing.service.gov.uk/government/uploads/system/uploads/attachment_data/file/936567/10_POINT_PLAN_BOOKLET.pdf. Accessed 3 Oct 2022
HM Government (2021a) Industrial decarbonisation strategy [Online]. Available: https://assets.publishing.service.gov.uk/government/uploads/system/uploads/attachment_data/file/970149/6.7279_BEIS_CP399_Industrial_Decarbonisation_Strategy_FINAL_PRINT_FULL_NO_BLEED.pdf. Accessed 11 Aug 2022
HM Government (2021b) Net zero strategy: build back greener [Online]. Available: https://assets.publishing.service.gov.uk/government/uploads/system/uploads/attachment_data/file/1026655/net-zero-strategy.pdf. Accessed 19 Oct 2021b
HM Government (2022) Levelling up the United Kingdom [Online]. Available: https://assets.publishing.service.gov.uk/government/uploads/system/uploads/attachment_data/file/1052708/Levelling_up_the_UK_white_paper.pdf. Accessed 16 Jan 2023
Hu AH, Sin-How S, Chia-Wei H, Chao-Heng T Eco-efficiency evaluation of the eco-industrial cluster. In: 2005 4th international symposium on environmentally conscious design and inverse manufacturing, 12–14 Dec. 2005 2005, pp 775–778
Ibn-Mohammed T, Randall CA, Mustapha KB, Guo J, Walker J, Berbano S, Koh SCL, Wang D, Sinclair DC, Reaney IM (2019) Decarbonising ceramic manufacturing: a techno-economic analysis of energy efficient sintering technologies in the functional materials sector. J Eur Ceram Soc 39:5213–5235
IEA (2020) Sustainable recovery. International Energy Agency, Paris
IEA (2021) World Energy Outlook 2021. IEA, Paris
IEA (2022) Industry [Online]. Paris: IEA. Available: https://www.iea.org/reports/industry. Accessed
John St CH, Pouder RW (2006) Technology clusters versus industry clusters: Resources, networks, and regional advantages. Grow Change 37(2):141–171
Johnson OW, Mete G, Sanchez F, Shawoo Z, Talebian S (2021) Toward climate-neutral heavy industry: an analysis of industry transition roadmaps. Appl Sci 11:5375
Kakoulaki G, Kougias I, Taylor N, Dolci F, Moya J, Jäger-Waldau A (2021) Green hydrogen in Europe—a regional assessment: Substituting existing production with electrolysis powered by renewables. Energy Convers Manage 228:113649
Kazi M-K, Eljack F, El-Halwagi MM, Haouari M (2021) Green hydrogen for industrial sector decarbonization: costs and impacts on hydrogen economy in Qatar. Comput Chem Eng 145:107144
Köhler J, Geels FW, Kern F, Markard J, Onsongo E, Wieczorek A, Alkemade F, Avelino F, Bergek A, Boons F, Fünfschilling L, Hess D, Holtz G, Hyysalo S, Jenkins K, Kivimaa P, Martiskainen M, McMeekin A, Mühlemeier MS, Nykvist B, Pel B, Raven R, Rohracher H, Sandén B, Schot J, Sovacool B, Turnheim B, Welch D, Wells P (2019) An agenda for sustainability transitions research: state of the art and future directions. Environ Innov Soc Trans 31:1–32
Lutz LM, Lang DJ, Von Wehrden H (2017) Facilitating regional energy transition strategies: Toward a typology of regions. Sustain 9(9):1560. https://doi.org/10.3390/su9091560
Make UK (2022) Manufacturing sector net zero roadmap. Available: https://www.makeuk.org/insights/reports/manufacturing-sector-net-zero-roadmap. Accessed 24 Apr 2023
Markusen A (1999) Sticky places in slippery space: a typology of industrial districts. In: Barnes TJ, Gertler MS (eds) The new industrial geography: regions, regulation and institutions. Routledge, London
Marquand E (2022) Confederation of paper industries: electrification of UK Paper Mills [Online]. FICHTNER Consulting Engineers Limited. Available: https://thecpi.org.uk/library/PDF/Public/Publications/Reports/UK%20Paper%20Mills%20Grid%20Connection%20Assessment.pdf. Accessed 21 Nov 2022
Marsidi M (2018) Electric industrial boiler technology fact sheet. TNO
Martin H (2020) The scope of regional innovation policy to realize transformative change—a case study of the chemicals industry in western Sweden. Eur Plan Stud 28:2409–2427
Massol O, Tchung-Ming S, Banal-Estañol A (2018) Capturing industrial CO2 emissions in Spain: infrastructures, costs and break-even prices. Energy Policy 115:545–560
Meckel TA, Bump AP, Hovorka SD, Trevino RH (2021) Carbon capture, utilization, and storage hub development on the Gulf Coast. Greenh Gases Sci Technol 11:619–632
Ministry of Economy Trade and Industry of Japan (2017) Basic hydrogen strategy (provisional english translation) [Online]. Available: https://policy.asiapacificenergy.org/sites/default/files/Basic%20Hydrogen%20Strategy%20%28EN%29.pdf. Accessed 1 Dec 2022
NAEI (2022) Emissions from NAEI large point sources [Online]. Department of Business, Energy, and Industrial Strategy. Available: https://naei.beis.gov.uk/data/map-large-source. Accessed 21 Nov 2022
Noori S, Korevaar G, Ramirez AR (2021) Assessing industrial symbiosis potential in Emerging Industrial Clusters: the case of Persian Gulf Mining and metal industries special economic zone. J Clean Prod 280:124765
Norman J, Barrett J, Garvey A, Taylor P, Goodwin J, Gibbs M, German R, Garland L (2020) A data strategy to promote the clean growth of UK industries: The role of data in accelerating positive change for industry and the environment. Centre for Research into Energy Demand Solutions, Oxford. ISBN: 978-1-913299-02-6 Available: https://www.creds.ac.uk/wp-content/uploads/CREDS-Data-clean-growth-strategy-2020.pdf
NRW.Energy4Climate (n.d.) Introducing the new regional agency for energy and climate protection [Online]. Available: https://www.energy4climate.nrw/en/about-us. Accessed 1 Dec 2022
Nurdiawati A, Urban F (2021) Towards deep decarbonisation of energy-intensive industries: a review of current status, technologies and policies. Energies 14:2408
Nurdiawati A, Urban F (2022) Decarbonising the refinery sector: a socio-technical analysis of advanced biofuels, green hydrogen and carbon capture and storage developments in Sweden. Energy Res Soc Sci 84:102358
Oliveira C, Schure K (2020) Decarbonisation options for the Dutch refinery sector. PBL Netherlands Environmental Assessment Agency and TNO Energy Transition, The Hague
Papadogeorgos I, Schure KM (2019) Decarbonisation options for the dutch container and tableware glass industry. PBL Netherlands Environmental Assessment Agency
Parker C, Scott S, Geddes A (2019) Snowball sampling. In: Atkinson P, Delamont S, Cernat A, Sakshaug JW, Williams RA (eds) SAGE research methods foundations. https://doi.org/10.4135/9781526421036831710
Perrucci DV, Aktaş CB, Sorentino J, Akanbi H, Curabba J (2022) A review of international eco-Industrial parks for implementation success in the United States. City Environ Interact 16:100086. https://doi.org/10.1016/j.cacint.2022.100086
Pilorgé H, McQueen N, Maynard D, Psarras P, He J, Rufael T, Wilcox J (2020) Cost analysis of carbon capture and sequestration of process emissions from the US Industrial Sector. Environ Sci Technol 54:7524–7532
Porter ME (2011) Competitive advantage of nations: creating and sustaining superior performance. Simon and Schuster
Rademaker K, Marsidi M (2019) Decarbonisation options for the Dutch paper and board industry. PBL Netherlands Environmental Assessment Agency
Rahnama Mobarakeh M, Santos Silva M, Kienberger T (2021) Pulp and paper industry: decarbonisation technology assessment to reach CO2 neutral emissions—an Austrian case study. Energies 14:1161
Rattanadecho P, Makul N (2016) Microwave-assisted drying: a review of the state-of-the-art. Drying Technol 34:1–38
Refsgaard K, Kull M, Slätmo E, Meijer MW (2021) Bioeconomy—a driver for regional development in the Nordic countries. New Biotechnol 60:130–137
Richardson-Barlow C, Pimm AJ, Taylor PG, Gale WF (2022) Policy and pricing barriers to steel industry decarbonisation: a UK case study. Energy Policy 168:113100. https://doi.org/10.1016/j.enpol.2022.113100
Robinson R (2014) Purposive sampling. In: Michalos AC (ed) Encyclopedia of quality of life well-being research. Springer, Dordrech
Roelfes M, Wehnert T, Mölter H, Bagnoli V, Doernbrack A-S, Lehr D (2018) Specification of regional challenges/typology of high-carbon industry regions. Working Paper 4.5. 2 Re-Industrialise DE 3. D
Samadi S, Schneider C, Lechtenböhmer S (2018) Deep decarbonisation pathways for the industrial cluster of the Port of Rotterdam. In: Eceee Industrial Summer Study Proceedings
Schneider C, Lechtenböhmer S, Samadi S (2020) Risks and opportunities associated with decarbonising Rotterdam’s industrial cluster. Environ Innov Soc Trans 35:414–428
Schneider C, Lechtenböhmer S (2018) Concepts and pathways towards a carbon-neutral heavy industry in the German federal state of North Rhine-Westphalia. In: Eceee Industrial Summer Study Proceedings, 2018
Simoni M, Wilkes MD, Brown S, Provis JL, Kinoshita H, Hanein T (2022) Decarbonising the lime industry: State-of-the-art. Renew Sustain Energy Rev 168:112765
Skoczkowski T, Verdolini E, Bielecki S, Kochański M, Korczak K, Węglarz A (2020) Technology innovation system analysis of decarbonisation options in the EU steel industry. Energy 212:118688
Sovacool BK, Bazilian M, Griffiths S, Kim J, Foley A, Rooney D (2021) Decarbonizing the food and beverages industry: A critical and systematic review of developments, sociotechnical systems and policy options. Renew Sustain Energy Rev 143:110856. https://doi.org/10.1016/j.rser.2021.110856
Steubing M, Dotzauer M, Zakaluk T, Wern B, Noll F, Thraen D (2020) Bioenergy plants’ potential for contributing to heat generation in Germany. Energy Sustain Soc 10:14
SWIC (2022) Deployment Project [Online]. Available: https://www.swic.cymru/deployment. Accessed 15 Nov 2022
Tagliaferri C, Evangelisti S, Clift R, Lettieri P (2018) Life cycle assessment of a biomass CHP plant in UK: the Heathrow energy centre case. Chem Eng Res Des 133:210–221
The Bradford Economic Partnership (2021) Bradford District’s Economic Recovery Plan [Online]. Available: https://www.bradford.gov.uk/media/6290/bradford-district-economic-recovery-plan.pdf. Accessed 11 Oct 2022
The Government of Canada (2020) Hydrogen strategy for Canada
Tödtling F, Trippl M (2005) One size fits all?: Towards a differentiated regional innovation policy approach. Res Policy 34:1203–1219
Truffer B, Coenen L (2012) Environmental innovation and sustainability transitions in regional studies. Reg Stud 46:1–21
Tudor T, Adam E, Bates M (2007) Drivers and limitations for the successful development and functioning of EIPs (eco-industrial parks): a literature review. Ecol Econ 61:199–207
Turgel I, Bozhko L, Bazhenov O (2020) The evaluation methodology for the ecological and economic potential of the metallurgical cluster. Environ Clim Technol 24:501–515
UK Government (2014) Guidance on technology readiness levels [Online]. Available: https://www.gov.uk/government/news/guidance-on-technology-readiness-levels. Accessed 16 Jan 2023
UK Government (2022) Industrial Energy Transformation Fund (IETF) Phase 2: autumn 2022—how to apply [Online]. Available: https://www.gov.uk/government/publications/industrial-energy-transformation-fund-ietf-phase-2-autumn-2022. Accessed 16 Jan 2023
UKRI (2021) Repowering the Black Country Phase 2 cluster plan [Online]. Available: https://gtr.ukri.org/projects?ref=73028. Accessed 1 Dec 2022
Upham DP, Sovacool PB, Ghosh DB (2022) Just transitions for industrial decarbonisation: a framework for innovation, participation, and justice. Renew Sustain Energy Rev 167:112699
Venkataraman M, Csereklyei Z, Aisbett E, Rahbari A, Jotzo F, Lord M, Pye J (2022) Zero-carbon steel production: the opportunities and role for Australia. Energy Policy 163:112811
Vetter D (2021) How Sweden delivered the world’s first fossil fuel-free steel [Online]. Forbes. Available: https://www.forbes.com/sites/davidrvetter/2021/08/19/how-sweden-delivered-the-worlds-first-fossil-fuel-free-steel/?sh=7d2666246b55. Accessed 01 Dec 2022
Wang S, Cao H (2017) Research on the development strategy of Pingdingshan iron and steel industry cluster with Wugang Company as the core. MATEC Web Conf., 2017, p 05066
Waxman AR, Corcoran S, Robison A, Leibowicz BD, Olmstead S (2021) Leveraging scale economies and policy incentives: carbon capture, utilization and storage in Gulf clusters. Energy Policy 156:112452
World Bank (2021) Employment in industry (% of total employment) (modeled ILO estimate) [Online]. Available: https://data.worldbank.org/indicator/SL.IND.EMPL.ZS. Accessed 13 Oct 2022
Yin RK (2014) Case study research: design and methods. Sage, London
Zeng G, Bathelt H (2011) Divergent growth trajectories in China’s chemical industry: the case of the newly developed industrial parks in Shanghai, Nanjing and Ningbo. GeoJournal 76:675–698
Acknowledgements
The authors are grateful for the exchange of ideas made possible through the International Research Network for Low Carbon Societies. We also wish to thank all the participants who contributed to our study.
Funding
This research was undertaken as part of the UK Energy Research Centre, funded by the UK Research and Innovation Energy Programme (Grant number EP/S029575/1) and as part of the Industrial Decarbonisation Research and Innovation Centre funded by UK Research and Innovation (Grant number EP/V027050/1).
Author information
Authors and Affiliations
Contributions
IR: Conceptualization, Methodology, Investigation, Writing - Original Draft, Writing - Review & Editing. AG: Conceptualization, Methodology, Investigation, Writing - Original Draft, Visualization. PT, Conceptualization, Resources, Writing - Review & Editing, Supervision.
Corresponding author
Ethics declarations
Conflict of interest
The authors have no relevant financial or non-financial interests to disclose.
Compliance with ethical standards
Ethical approval for this study was obtained from the Research Ethics Committee of the University of Leeds references AREA 2022-0140 and LTSEE-121. Written consent was obtained from all the participants.
Additional information
Publisher's Note
Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.
Handled by Mikiko KAINUMA, Institute for Global Environment Strategies, Japan.
Rights and permissions
Open Access This article is licensed under a Creative Commons Attribution 4.0 International License, which permits use, sharing, adaptation, distribution and reproduction in any medium or format, as long as you give appropriate credit to the original author(s) and the source, provide a link to the Creative Commons licence, and indicate if changes were made. The images or other third party material in this article are included in the article's Creative Commons licence, unless indicated otherwise in a credit line to the material. If material is not included in the article's Creative Commons licence and your intended use is not permitted by statutory regulation or exceeds the permitted use, you will need to obtain permission directly from the copyright holder. To view a copy of this licence, visit http://creativecommons.org/licenses/by/4.0/.
About this article
Cite this article
Rattle, I., Gailani, A. & Taylor, P.G. Decarbonisation strategies in industry: going beyond clusters. Sustain Sci 19, 105–123 (2024). https://doi.org/10.1007/s11625-023-01313-4
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s11625-023-01313-4