Skip to main content
Log in

Shock wave on materials

  • Article
  • Condensed Matter Physics
  • Published:
Chinese Science Bulletin

Abstract

Shock wave is associated with dynamic loading that can result in phase transition (PT), optical and mechanical property changing, and chemical reaction on materials. Here, we report recent progress about shock-induced PT of polycrystalline iron, the underlying mechanism of the optical emission from sapphire, and the synthesis from single-phase RuSi in the National Key Laboratory of Shock Wave and Detonation Physics. Results indicated that grain boundary (GB) could affect the PT pressure threshold and rate of iron, the pressure threshold decreases with decreasing GB defects, and the PT rate shows a variation with increasing GB size; wavelength-dependent optical emissivity (non-gray-body emission) would be generated that was not revealed previously for shocked sapphire, and the observed luminescence was from the shock-induced shear bands, but without superheating phenomenon; shock compression could be an effective way to synthesis Ru-Si nanocrystals, when the shock pressure was appropriate; and Ru-Si powder could completely transform to fine-grain structure CsCl-type Ru-Si at 40.4 GPa.

This is a preview of subscription content, log in via an institution to check access.

Access this article

Price excludes VAT (USA)
Tax calculation will be finalised during checkout.

Instant access to the full article PDF.

Fig. 1
Fig. 2
Fig. 3
Fig. 4
Fig. 5
Fig. 6
Fig. 7
Fig. 8
Fig. 9

Similar content being viewed by others

References

  1. Hu JB, Zhou XM, Dai CD et al (2008) Shock-induced bct-bcc transition and melting of tin identified by sound velocity measurements. J Appl Phys 104:083520

    Article  Google Scholar 

  2. Schmitt DR, Ahrens TJ, Svendsen B (1988) Shock-induced melting and shear banding in single-crystal NaCl. J Appl Phys 63:99–106

    Article  Google Scholar 

  3. Liang JH, Wang S, Hu HH et al (2012) Shock tube study of kerosene ignition delay at high pressures. Sci China Phys Mech Astron 55:947–954

    Article  Google Scholar 

  4. Cui XL, Zhu WJ (2008) Phase transformation of iron under shock compression: effects of voids and shear stress. Phys Rev B 78:024115

    Article  Google Scholar 

  5. Partouche-Sebban D, Pélissier JL, Abeyta FG et al (2005) Measurement of the shock-heated melt curve of lead using pyrometry and reflectometry. J Appl Phys 97:043521

    Article  Google Scholar 

  6. Kondo K (1994) Window problem and complementary method for shock-temperature measurements of iron. In: Schmidt SC, Dick RD, Forbes JW (eds) Shock compression of condensed matter—1993. Springs, Colorado, pp 555–1558

    Google Scholar 

  7. Hare DE, Holmes NC, Webb DJ (2002) Shock-wave-induced optical emission from sapphire in the stress range 12 to 45 GPa: images and spectra. Phys Rev B 66:014108–014119

    Article  Google Scholar 

  8. Vescoli V, Degiorgi L, Buschinger B et al (1998) The optical properties of RuSi: Kondo insulator or conventional semiconductor. Solid State Commun 105:367–370

    Article  Google Scholar 

  9. Boslough MB (1985) A model for time dependence in shock-induced thermal radiation of light. J Appl Phys 58:3394–3399

    Article  Google Scholar 

  10. Partouche-Sebban D, Pélissier JL, Andrson WW et al (2005) Investigation of shock-induced light from sapphire for use in pyrometry studies. Phys B 364:1–13

    Article  Google Scholar 

  11. de Rességuier T, Hallouin M (2008) Effects of the α-ε phase transition on wave propagation and spallation in laser shock-loaded iron. Phys Rev B 77:174107

    Article  Google Scholar 

  12. Barker LM, Hollenbach RE (1974) Shock wave study of the α↔ε phase transition in iron. J Appl Phys 45:4872–4887

    Article  Google Scholar 

  13. Shen GY, Lazor P (1995) Measurement of melting temperatures of some minerals under lower mantle pressures. J Geophys Res 100:699–713

    Google Scholar 

  14. Wang ZG, Mao HH, Saxena SK (2000) The melting of corundum (Al2O3) under high pressure conditions. J Alloys Compd 299:287–291

    Article  Google Scholar 

  15. Grady DE (1980) Shock deformation of brittle solids. J Geophys Res 85:913–924

    Article  Google Scholar 

  16. Roufosse MC, Jeanloz R (1983) Thermal conductivity of minerals at high pressure: the effect of phase transitions. J Geophys Res 88:7399–7409

    Article  Google Scholar 

  17. Meyers MA, Yu LH, Vecchio KS (1994) Shock synthesis of silicides-II. Thermodynamics and kinetics. Acta Metall Mater 42:715–729

    Article  Google Scholar 

Download references

Acknowledgments

This work was partially supported by the National Natural Science Foundation of China (U1230202, 11072227 and 11272294), the Foundation of National Key Laboratory of Shock Wave and Detonation Physics (9140C670302130C67239), and the Science and Technology Foundation of China Academy of Engineering Physics (2012A0201007).

Author information

Authors and Affiliations

Authors

Corresponding author

Correspondence to Tao Li.

Additional information

SPECIAL TOPIC: High Pressure Physics

About this article

Check for updates. Verify currency and authenticity via CrossMark

Cite this article

Cao, X., Li, T., Li, X. et al. Shock wave on materials. Chin. Sci. Bull. 59, 5302–5308 (2014). https://doi.org/10.1007/s11434-014-0646-2

Download citation

  • Received:

  • Accepted:

  • Published:

  • Issue Date:

  • DOI: https://doi.org/10.1007/s11434-014-0646-2

Keywords

Navigation