Skip to main content
SpringerLink
Log in

Towards tapered-fiber-based all-fiberized high power narrow linewidth fiber laser

  • Article
  • Published:
Science China Technological Sciences Aims and scope Submit manuscript

Abstract

Yb-doped fiber laser (YDFL) is a promising kind of laser source due to high efficiency, excellent beam quality, robust configuration, diverse applications and so on. The progress of large-mode-area double cladding active fiber and high power laser diodes have been continuously promoting the power scaling of the YDFLs. However, the further power scaling is blocked by some physic issues including nonlinear effect, thermal-induced mode instability (MI), optical damage and so forth. So, newly-designed fibers with special structures are invented to address or relieve these limitations. The tapered fiber, which has changed mode area along its longitudinal direction, has been demonstrated to benefit suppressing the nonlinear effect, especially the stimulated Brillouin scattering (SBS) effect. In this paper, we will review the previous work done to explore the advantages of the tapered fiber for high power output, and then for the first time to our knowledge, demonstrate an all-fiberized high power narrow linewidth fiber laser based on a homemade tapered Yb-doped fiber (T-YDF). As a result, an output power of 260 W with a narrow linewidth of ∼2 GHz is obtained, with SBS effectively suppressed owing to gradually increased mode area of the T-YDF as well as continuously changed Brillouin frequency shift dependent on the core diameter. Further power scaling is limited by MI, and the features of MI are studied in detail. It is pointed out that, the MI seems the primary and durative limitation factor of the tapered fiber amplifier for high power narrow linewidth output due to the gradually increased effective numerical aperture (NA) and the excitation of the high-order modes, even although it has the advantage to reduce other nonlinear effects. At last, worthwhile discussion about the optimization of the T-YDF and the whole fiber laser system for both SBS and MI suppression is conducted based on the previous and our results. It is concluded that the small diameter at the small-diameter end and low optical NA are preferred in the design of a T-YDF to ensure good beam quality and improve the MI threshold. The good splicing quality and proper coiling or bend state are also necessary.

This is a preview of subscription content, log in via an institution to check access.

Access this article

Log in via an institution

Price excludes VAT (USA)
Tax calculation will be finalised during checkout.

Instant access to the full article PDF.

Institutional subscriptions

Similar content being viewed by others

References

  1. Jauregui C, Limpert J, Tünnermann A. High-power fibre lasers. Nat Photon, 2013, 7: 861–867

    Article  Google Scholar 

  2. Zhong K, Shi W, Xu D G, et al. Optically pumped terahertz sources. Sci China Tech Sci, 2017, 60: 1801–1818

    Article  Google Scholar 

  3. Li G P, Wang H, Qi X Q, et al. Widely tunable microwave photonic filter based on self-adaptive optical carrier regeneration. Sci China Tech Sci, 2017, 60: 872–877

    Article  Google Scholar 

  4. Zhou P, Huang L, Xu J M, et al. High power linearly polarized fiber laser: Generation, manipulation and application. Sci China Tech Sci, 2017, 60: 1784–1800

    Article  Google Scholar 

  5. Stiles E. New developments in ipg fiber laser technology. In: Proceedings of the 5th International Workshop on Fiber Lasers, Dresden, 2009

    Google Scholar 

  6. Fang Q, Li J, Shi W, et al. 5 kW near-diffraction-limited and 8 kW high-brightness monolithic continuous wave fiber lasers directly pumped by laser diodes. IEEE Photonics J, 2017, 9: 1–7

    Google Scholar 

  7. Zhou P, Xiao H, Leng J, et al. High-power fiber lasers based on tandem pumping. J Opt Soc Am B, 2017, 34: A29–A36

    Article  Google Scholar 

  8. Beier F, Hupel C, Nold J, et al. Narrow linewidth, single mode 3 kW average power from a directly diode pumped ytterbium-doped low NA fiber amplifier. Opt Express, 2016, 24: 6011–6020

    Article  Google Scholar 

  9. Ma P, Tao R, Su R, et al. 1.89 kW all-fiberized and polarizationmaintained amplifiers with narrow linewidth and near-diffractionlimited beam quality. Opt Express, 2016, 24: 4187–4195

    Article  Google Scholar 

  10. Yu C X, Shatrovoy O, Fan T Y, et al. Diode-pumped narrow linewidth multi-kilowatt metalized Yb fiber amplifier. Opt Lett, 2016, 41: 5202–5205

    Article  Google Scholar 

  11. Su R, Tao R, Wang X, et al. 2.43 kW narrow linewidth linearly polarized all-fiber amplifier based on mode instability suppression. Laser Phys Lett, 2017, 14: 085102

    Article  Google Scholar 

  12. Dawson J W, Messerly M J, Beach R J, et al. Analysis of the scalability of diffraction-limited fiber lasers and amplifiers to high average power. Opt Express, 2008, 16: 13240–13266

    Article  Google Scholar 

  13. Zervas M N, Codemard C A. High power fiber lasers: A review. IEEE J Sel Top Quantum Electron, 2014, 20: 219–241

    Article  Google Scholar 

  14. Gray S, Liu A, Walton D T, et al. 502 Watt, single transverse mode, narrow linewidth, bidirectionally pumped Yb-doped fiber amplifier. Opt Express, 2007, 15: 17044–17050

    Article  Google Scholar 

  15. Ma P, Zhou P, Ma Y, et al. Single-frequency 332 W, linearly polarized Yb-doped all-fiber amplifier with near diffraction-limited beam quality. Appl Opt, 2013, 52: 4854–4857

    Article  Google Scholar 

  16. Jeong Y, Nilsson J, Sahu J K, et al. Power scaling of single-frequency ytterbium-doped fiber master-oscillator power-amplifier sources up to500 W. IEEE J Sel Top Quantum Electron, 2007, 13: 546–551

    Article  Google Scholar 

  17. Huang L, Wu H, Li R, et al. 414 W near-diffraction-limited all-fiberized single-frequency polarization-maintained fiber amplifier. Opt Lett, 2017, 42: 1–4

    Article  Google Scholar 

  18. Fang Q, Shi W, Kieu K, et al. High power and high energy monolithic single frequency 2 μm nanosecond pulsed fiber laser by using large core Tm-doped germanate fibers: experiment and modeling. Opt Express, 2012, 20: 16410–16420

    Article  Google Scholar 

  19. Wang X, Zhou P, Wang X, et al. 102 W monolithic single frequency Tm-doped fiber MOPA. Opt Express, 2013, 21: 32386–32396

    Article  Google Scholar 

  20. Eidam T, Wirth C, Jauregui C, et al. Experimental observations of the threshold-like onset of mode instabilities in high power fiber amplifiers. Opt Express, 2011, 19: 13218–13224

    Article  Google Scholar 

  21. Smith A V, Smith J J. Mode instability in high power fiber amplifiers. Opt Express, 2011, 19: 10180–10192

    Article  Google Scholar 

  22. Ward B, Robin C, Dajani I. Origin of thermal modal instabilities in large mode area fiber amplifiers. Opt Express, 2012, 20: 11407–11422

    Article  Google Scholar 

  23. Huang L, Xu J, Ye J, et al. Power scaling of linearly polarized random fiber laser. IEEE J Sel Top Quantum Electron, 2018, 24: 1–8

    Google Scholar 

  24. Zervas M N. Transverse mode instability analysis in fibre amplifiers. In: Proceedings of Fiber Lasers XIV: Technology and Systems. San Francisco: SPIE, 2017

    Google Scholar 

  25. Liu Z, Ma P, Su R, et al. High-power coherent beam polarization combination of fiber lasers: Progress and prospect [Invited]. J Opt Soc Am B, 2017, 34: A7–A14

    Article  Google Scholar 

  26. Beier F, Sattler B, Liem A, et al. Detailed investigations on thermal mode instabilities in LMA Yb-doped fibers. In: proceedings of OSA Technical Digest. Nagoya: OSA, 2017

    Google Scholar 

  27. Tao R, Ma P, Wang X, et al. Mitigating of modal instabilities in linearly-polarized fiber amplifiers by shifting pump wavelength. J Opt, 2015, 17: 045504

    Article  Google Scholar 

  28. Shiraki K, Ohashi M, Tateda M. Suppression of stimulated Brillouin scattering in a fibre by changing the core radius. Electron Lett, 1995, 31: 668–669

    Article  Google Scholar 

  29. Liu A. Suppressing stimulated Brillouin scattering in fiber amplifiers using nonuniform fiber and temperature gradient. Opt Express, 2007, 15: 977–984

    Article  Google Scholar 

  30. Filippov V, Chamorovskii Y, Kerttula J, et al. Double clad tapered fiber for high power applications. Opt Express, 2008, 16: 1929–1944

    Article  Google Scholar 

  31. Alvarez-Chavez J A, Grudinin A B, Nilsson J, et al. Mode selection in high power cladding pumped fibre lasers with tapered section. In: proceedings of Lasers and Electro-Optics. Baltimore: IEEE, 1999

    Google Scholar 

  32. Filippov V, Chamorovskii Y, Kerttula J, et al. 600 W power scalable single transverse mode tapered double-clad fiber laser. Opt Express, 2009, 17: 1203–1214

    Article  Google Scholar 

  33. Kerttula J, Filippov V, Chamorovskii Y, et al. Principles and performance of tapered fiber lasers: from uniform to flared geometry. Appl Opt, 2012, 51: 7025–7038

    Article  Google Scholar 

  34. Kerttula J, Filippov V, Chamorovskii Y, et al. Actively Q-switched 16-mJ tapered double-clad ytterbium-doped fiber laser. Opt Express, 2010, 18: 18543–18549

    Article  Google Scholar 

  35. Filippov V, Kerttula J, Chamorovskii Y, et al. Highly efficient 750 W tapered double-clad ytterbium fiber laser. Opt Express, 2010, 18: 12499–12512

    Article  Google Scholar 

  36. Shi C, Wang X, Zhou P, et al. Theoretical study of mode evolution in active long tapered multimode fiber. Opt Express, 2016, 24: 19473–19490

    Article  Google Scholar 

  37. Kerttula J, Filippov V, Chamorovskii Y, et al. Tapered fiber amplifier with high gain and output power. Laser Phys, 2013, 22: 1734–1738

    Article  Google Scholar 

  38. Zhang H, Du X, Zhou P, et al. Tapered fiber based high power random laser. Opt Express, 2016, 24: 9112–9118

    Article  Google Scholar 

  39. Lou Z, Jin X, Zhang H, et al. High power, high-order random Raman fiber laser based on tapered fiber. IEEE Photonics J, 2017, 9: 1–6

    Article  Google Scholar 

  40. Trikshev A I, Kurkov A S, Tsvetkov V B, et al. A 160 W singlefrequency laser based on an active tapered double-clad fiber amplifier. Laser Phys Lett, 2013, 10: 065101

    Article  Google Scholar 

  41. Zhou Z, Zhang H, Wang X, et al. All-fiber-integrated single frequency tapered fiber amplifier with near diffraction limited output. J Opt, 2016, 18: 065504

    Article  Google Scholar 

  42. Filippov V, Chamorovskii Y K, Golant K M, et al. Optical amplifiers and lasers based on tapered fiber geometry for power and energy scaling with low signal distortion. In: Proceedings of Fiber Lasers XIII: Technology, Systems and Application. San Francisco: SPIE, 2016

    Google Scholar 

  43. Filippov V, Chamorovskii Y, Kerttula J, et al. Single-mode 212 W tapered fiber laser pumped by a low-brightness source. Opt Lett, 2008, 33: 1416–1418

    Article  Google Scholar 

  44. Ran Y, Su R, Ma P, et al. Standard deviation index for stimulated Brillouin scattering suppression with different homogeneities. Appl Opt, 2016, 55: 3809–3813

    Article  Google Scholar 

  45. Filippov V, Ustimchik V, Chamorovskii Y, et al. Impact of axial profile of the gain medium on the mode instability in lasers: Regular versus tapered fibers. In: proceedings of European Conference on Lasers and Electro-Optics. Munich: OSA, 2015

    Google Scholar 

  46. Tao R, Ma P, Wang X, et al. 1.3 kW monolithic linearly polarized single-mode master oscillator power amplifier and strategies for mitigating mode instabilities. Photon Res, 2015, 3: 86–93

    Article  Google Scholar 

  47. Tao R, Ma P, Wang X, et al. Comparison of the threshold of thermalinduced mode instabilities in polarization-maintaining and non-polarization- maintaining active fibers. J Opt, 2016, 18: 065501

    Article  Google Scholar 

  48. Otto H J, Stutzki F, Jansen F, et al. Temporal dynamics of mode instabilities in high-power fiber lasers and amplifiers. Opt Express, 2012, 20: 15710–15722

    Article  Google Scholar 

  49. Johansen M M, Laurila M, Maack M D, et al. Frequency resolved transverse mode instability in rod fiber amplifiers. Opt Express, 2013, 21: 21847–21856

    Article  Google Scholar 

  50. Ran Y, Tao R, Ma P, et al. 560 W all fiber and polarization-maintaining amplifier with narrow linewidth and near-diffraction-limited beam quality. Appl Opt, 2015, 54: 7258–7263

    Article  Google Scholar 

  51. Smith A V. Influence of signal bandwidth on mode instability thresholds of fiber amplifiers. In: Proceedings of Fiber Lasers XII: Technology Systems and Applications. San Francisco: SPIE, 2014

    Google Scholar 

  52. Kuznetsov M, Vershinin O, Tyrtyshnyy V, et al. Low-threshold mode instability in Yb3+-doped few-mode fiber amplifiers. Opt Express, 2014, 22: 29714–29725

    Article  Google Scholar 

  53. Tao R, Ma P, Wang X, et al. Influence of core NA on thermal-induced mode instabilities in high power fiber amplifiers. Laser Phys Lett, 2015, 12: 085101

    Article  Google Scholar 

  54. Tao R, Wang X, Zhou P, et al. Seed power dependence of mode instabilities in high-power fiber amplifiers. J Opt, 2017, 19: 065202

    Article  Google Scholar 

  55. Xiao H, Zhou P, Wang X L et al. High power 1018 nm ytterbium doped fiber laser with an output power of 309 W. Laser Phys Lett, 2013, 10: 65102

    Article  Google Scholar 

  56. Xiao H, Leng J, Zhang H, et al. High-power 1018 nm ytterbiumdoped fiber laser and its application in tandem pump. Appl Opt, 2015, 54: 8166–8169

    Article  Google Scholar 

  57. Naderi S, Dajani I, Grosek J, et al. Theoretical analysis of effect of pump and signal wavelengths on modal instabilities in Yb-doped fiber amplifiers. In: Proceedings of Nonlinear Frequency Generation and Conversion: Materials, Devices and Applications. San Francisco: SPIE, 2014

    Google Scholar 

Download references

Author information

Authors and Affiliations

  1. College of Optoelectronic Science and Engineering, National University of Defense Technology, Changsha, 410073, China

    Long Huang, ZiChao Zhou, Chen Shi, RuMao Tao, PengFei Ma, XiaoLin Wang & Pu Zhou

  2. Hunan Provincial Collaborative Innovation Center of High Power Fiber Laser, Changsha, 410073, China

    Long Huang, ZiChao Zhou, Chen Shi, RuMao Tao, PengFei Ma, XiaoLin Wang & Pu Zhou

Authors
  1. Long Huang
    View author publications

    You can also search for this author in PubMed Google Scholar

  2. ZiChao Zhou
    View author publications

    You can also search for this author in PubMed Google Scholar

  3. Chen Shi
    View author publications

    You can also search for this author in PubMed Google Scholar

  4. RuMao Tao
    View author publications

    You can also search for this author in PubMed Google Scholar

  5. PengFei Ma
    View author publications

    You can also search for this author in PubMed Google Scholar

  6. XiaoLin Wang
    View author publications

    You can also search for this author in PubMed Google Scholar

  7. Pu Zhou
    View author publications

    You can also search for this author in PubMed Google Scholar

Corresponding author

Correspondence to Pu Zhou.

Rights and permissions

Reprints and permissions

About this article

Check for updates. Verify currency and authenticity via CrossMark

Cite this article

Huang, L., Zhou, Z., Shi, C. et al. Towards tapered-fiber-based all-fiberized high power narrow linewidth fiber laser. Sci. China Technol. Sci. 61, 971–981 (2018). https://doi.org/10.1007/s11431-017-9221-3

Download citation

  • Received:

  • Accepted:

  • Published:

  • Issue Date:

  • DOI: https://doi.org/10.1007/s11431-017-9221-3

Keywords

Search

Navigation