Abstract
Global community is increasingly alarmed by resource depletion and environmental pollution. In light of pressing environmental concerns and depletion of finite resources, the surge in fossil fuel usage has sparked twin crises: dwindling fossil fuel reserves and escalating environmental pollution. The current study introduces a novel approach to minimize waste by transforming it into briquettes suitable for large-scale production. Production of briquettes involves multiple stages, including collection, drying, crushing, screening, blending, compacting, and storage. The main objective of this research is to demonstrate and investigate the physico-mechanical and emission properties of briquettes produced with readily available organic fraction of municipal solid waste (MSW) such as food and garden waste. The physical, mechanical, and elemental characteristics such as calorific value, moisture content, ash, volatile matter, fixed carbon, density, compressive strength, and SEM-EDAX were determined. A combustibility test along with emission and water boiling test was also carried out. The MSW briquettes were prepared in a densification system at 130 °C temperature and 20 MPa. The study’s conclusion suggests that the MSW briquette with lignin content of 25–30%, calorific value of 22.53 MJ/kg, compressive strength of 14.517 N/mm2, and density of 1124.12 kg m−3 could be used to retain energy and lessen the harmful effects of climate change while also enhancing sustainability. Flue gas emissions from burning MSW briquettes in a biomass stove were examined in this study using flue gas analyzer and smoke meter. Furthermore, the generated briquettes exhibit a density of 1124.12 kg m−3 which is on par with coal, making them suitable for co-firing in boilers. Likewise, the determined parameters are compared with the biomass briquettes and firewood. Further investigation is required to elevate its quality and economic potential.
Similar content being viewed by others
Data availability
No datasets were generated or analysed during the current study.
References
Adeleke AA, Odusote JK, Ikubanni PP, Agboola OO, Balogun AO, Lasode OA (2021) Tumbling strength and reactivity characteristics of hybrid fuel briquette of coal and biomass wastes blends. Alex Eng J 60(5):4619–4625. https://doi.org/10.1016/j.aej.2021.03.069
Afsal A, David R, Baiju V, Suhail NM, Parvathy U, Rakhi RB (2020) Experimental investigations on combustion characteristics of fuel briquettes made from vegetable market waste and saw dust. Mater Today: Proc 33:3826–3831. https://doi.org/10.1016/j.matpr.2020.06.222
Ajimotokan HA, Ehindero AO, Ajao KS, Adeleke AA, Ikubanni PP, Shuaib-Babata YL (2019) Combustion characteristics of fuel briquettes made from charcoal particles and sawdust agglomerates. Scientific African 6:e00202. https://doi.org/10.1016/j.sciaf.2019.e00202
Akande OM, Olorunnisola AO (2018) Potential of briquetting as a waste-management option for handling market-generated vegetable waste in Port Harcourt, Nigeria. Recycling 3(2):11. https://doi.org/10.3390/recycling3020011
Akhator PE, Bazuaye L, Ewere A, Oshiokhai O (2023) Production and characterisation of solid waste-derived fuel briquettes from mixed wood wastes and waste pet bottles. Heliyon 9(11). https://doi.org/10.1016/j.heliyon.2023.e21432
Akolgo GA, Awafo EA, Essandoh EO, Owusu PA, Uba F, Adu-Poku KA (2021) Assessment of the potential of charred briquettes of sawdust, rice and coconut husks: using water boiling and user acceptability tests. Sci Afr 12:e00789. https://doi.org/10.1016/j.sciaf.2021.e00789
Aller D, Bakshi S, Laird DA (2017) Modified method for proximate analysis of biochars. J Anal Appl Pyrol 124:335–342. https://doi.org/10.1016/j.jaap.2017.01.012
Al-Salem SM, Lettieri P, Baeyens J (2009) Recycling and recovery routes of plastic solid waste (PSW): a review. Waste Manage 29(10):2625–2643. https://doi.org/10.1016/j.wasman.2009.06.004
Aransiola EF, Oyewusi TF, Osunbitan JA, Ogunjimi LAO (2019) Effect of binder type, binder concentration and compacting pressure on some physical properties of carbonized corncob briquette. Energy Rep 5:909–918. https://doi.org/10.1016/j.egyr.2019.07.011
Asamoah B, Nikiema J, Gebrezgabher S, Odonkor E, Njenga M (2016) A review on production, marketing and use of fuel briquettes. International Water Management Institute (IWMI), Colombo. CGIAR Research Program on Water, Land and Ecosystems (WLE). (Resource Recovery and Reuse Series 7), 51 p. https://doi.org/10.5337/2017.200
Askarniya Z, Kong L, Wang C, Sonawane SH, Mąkinia J, Boczkaj G (2023) “Tuning” of food wastes bioavailability as feedstock for bio-conversion processes by acoustic cavitation and SPC, SPS, or H2O2 as external oxidants. Chem Eng Process-Process Intensification:109626. https://doi.org/10.1016/j.cep.2023.109626
ASTM Standard E711–87: standard test method for gross calorific value of refuse derived fuel by the bomb calorimeter. ASTM International. 2004
Bot BV, Sosso OT, Tamba JG, Lekane E, Bikai J, Ndame MK (2021) Preparation and characterization of biomass briquettes made from banana peels, sugarcane bagasse, coconut shells and rattan waste. Biomass Convers Biorefin 1–10. https://doi.org/10.1007/s13399-021-01762-w
Coleti JL, Manfredi GVP, Vinhal JT, Junca E, Espinosa DCR, Tenório JAS (2020) Kinetic investigation of self-reduction basic oxygen furnace dust briquettes using charcoals from different biomass. J Market Res 9(6):13282–13293. https://doi.org/10.1016/j.jmrt.2020.09.061
Dao CN, Salam A, Oanh NTK, Tabil LG (2022) Effects of length-to-diameter ratio, pinewood sawdust, and sodium lingo sulfonate on quality of rice straw pellets produced via a flat die pellet mill. Renew Energy 181:1140–1154. https://doi.org/10.1016/j.renene.2021.09.088
Dharmadhikari HM, Kumar PR, Rao SS (2012) Performance and emissions of CI engine using blends of biodiesel and diesel at different injection pressures. Int J Appl Res Mech Eng 2(2):1–6
Du W, Wang J, Zhuo S, Zhong Q, Wang W, Chen Y, ..., Tao S (2021) Emissions of particulate PAHs from solid fuel combustion in indoor cookstoves. Sci Total Environ 771:145411. https://doi.org/10.1016/j.scitotenv.2021.145411
Erol M, Haykiri-Acma H, Küçükbayrak S (2010) Calorific value estimation of biomass from their proximate analyses data. Renew Energy 35(1):170–173. https://doi.org/10.4314/njbas.v25i2.4
Ganesan S, Vedagiri P (2022) Production of sustainable biomass briquettes from de-oiled cashewnut shell. Mater Today: Proc 68:2484–2492. https://doi.org/10.1016/j.matpr.2022.09.179
García R, Pizarro C, Lavín AG, Bueno JL (2012) Characterization of Spanish biomass wastes for energy use. Biores Technol 103(1):249–258. https://doi.org/10.1016/j.biortech.2011.10.004
Gayathri N, Pragadish N, Bright BB, Santhosh Kumar S (2023) Effect of volume fraction of cashew nut de-oiled husk biosilica on load-bearing properties of ramie fiber–reinforced vinyl ester resin composite. Biomass Convers Biorefin 1–10. https://doi.org/10.1007/s13399-023-04789-3
Guo Z, Wu J, Zhang Y, Wang F, Guo Y, Chen K, Liu H (2020) Characteristics of biomass charcoal briquettes and pollutant emission reduction for sulfur and nitrogen during combustion. Fuel 272:117632. https://doi.org/10.1016/j.fuel.2020.117632
Hajinezhad A, Nasiri S, Alizadeh N, Aboonajmi M (2019) Refuse-derived fuels (RDF) analysis for energy generation and its usage in various sectors. In: 2019 Iranian Conference on Renewable Energy & Distributed Generation (ICREDG). IEEE, pp 1–5. https://doi.org/10.1109/ICREDG47187.2019.190173
Hansted ALS, Boschert C, Hawboldt KA, Newell WJ, Yamaji FM (2024) Impact of densification process on unprocessed biomass and post-hydrothermal carbonization. Biomass Bioenerg 184:107203. https://doi.org/10.1016/j.biombioe.2024.107203
Hassan LG, Sani NA, Sokoto AM, Tukur UG (2017) Comparative studies of burning rates and water boiling time of wood charcoal and briquettes produced from carbonized martynia annua woody shells. Niger J Basic Appl Sci 25(2):21–27. https://doi.org/10.4314/njbas.v25i2.4
Ifa L (2019) Production of bio-briquette from biochar derived from pyrolysis of cashew nut waste. Ecol Environ Conserv (EEC) 25:125–131
Ifa L, Yani S, Nurjannah N, Darnengsih D, Rusnaenah A, Mel M, ..., Kusuma HS (2020) Techno-economic analysis of bio-briquette from cashew nut shell waste. Heliyon 6(9). https://doi.org/10.1016/j.heliyon.2020.e05009
ISO 16994 (2015) Solid biofuels—determination of total content of sulfur and chlorine. ISO, Geneva, pp 2015
Kaliyan N, Morey RV (2010) Densification characteristics of corn cobs. Fuel Process Technol 91(5):559–565. https://doi.org/10.1016/j.fuproc.2010.01.001
Kivumbi B, Jande YA, Kirabira JB, Kivevele TT (2021) Production of carbonized briquettes from charcoal fines using African elemi (Canarium schweinfurthii) resin as an organic binder. Energy Sources Part A: Recovery Util Environ Effects:1–17. https://doi.org/10.1080/15567036.2021.1977870
Kizito S, Jjagwe J, Ssewaya B, Nekesa L, Tumutegyereize P, Zziwa A, Komakech AJ (2022) Biofuel characteristics of non-charred briquettes from dried fecal sludge blended with food market waste: suggesting a waste-to-biofuel enterprise as a win–win strategy to solve energy and sanitation problems in slums settlements. Waste Manage 140:173–182. https://doi.org/10.1016/j.wasman.2021.11.029
Kpalo SY, Zainuddin MF, Abd Manaf L, Roslan AM (2021) Evaluation of hybrid briquettes from corncob and oil palm trunk bark in a domestic cooking application for rural communities in Nigeria. J Clean Prod 284:124745. https://doi.org/10.1016/j.jclepro.2020.124745
Li Y, Liu X, Men Y, Luo Z, Xiong R, Li J, ..., Shen G (2021) Indoor coal combustion for heating exacerbates CO2 exposure approaching harmful levels. Environ Sci Technol Lett 8(10):861–866. https://doi.org/10.1021/acs.estlett.1c00650
Li G, Hu R, Hao Y, Yang T, Li L, Luo Z, ..., Shen G (2023) CO2 and air pollutant emissions from bio-coal briquettes. Environ Technol Innov 29:102975. https://doi.org/10.1016/j.eti.2022.102975
Lubwama M, Yiga VA, Muhairwe F, Kihedu J (2020) Physical and combustion properties of agricultural residue bio-char bio-composite briquettes as sustainable domestic energy sources. Renew Energy 148:1002–1016. https://doi.org/10.1016/j.renene.2019.10.085
Maninder, Kathuria RS, Grover S (2012) Using agricultural residues as a biomass briquetting: an alternative source of energy. J Electrical Electron Eng 1:11–15. https://doi.org/10.9790/1676-0151115
Mbamala EC (2019) Burning rate and water boiling tests for differently composed palm kernel shell briquettes. IOSR J Environ Sci Toxicol Food Technol (IOSR-JESTFT) 13(3):37–43
Mendoza IJC, Portillo MAG, Mayta JGR, Limachi JLA, Torretta V, Ferronato N (2023) Social acceptance, emissions analysis and potential applications of paper-waste briquettes in Andean areas. Environ Res:117609. https://doi.org/10.1016/j.envres.2023.117609
Mfomo JZ, Biwolé AB, Fongzossie EF, Ekassi GT, Hubert D, Ducenne H, ..., Mouangue R (2020) Carbonization techniques and wood species influence quality attributes of charcoals produced from industrial sawmill residues in Eastern Cameroon. Bois For Trop 345:65–74
Narzary A, Brahma J, Das AK (2023) Utilization of waste rice straw for charcoal briquette production using three different binders. Clean Energy Syst:100072. https://doi.org/10.1016/j.cles.2023.100072
Nganko JM, Koffi EPM, Gbaha P, Kane M, Ndiaye B, Faye M, ..., Yao KB (2024) Modeling and optimization of compaction pressure, binder percentage and retention time in the production process of carbonized sawdust-based biofuel briquettes using response surface methodology (RSM). Heliyon 10(3). https://doi.org/10.1016/j.heliyon.2024.e25376
Nikiema J, Asamoah B, Egblewogbe MN, Akomea-Agyin J, Cofie OO, Hughes AF, ..., Njenga M (2022) Impact of material composition and food waste decomposition on characteristics of fuel briquettes. Resour Conserv Recycl Adv 15:200095. https://doi.org/10.1016/j.rcradv.2022.200095
Ofori P (2020) Production and characterisation of briquettes from carbonised cocoa pod husk and sawdust. Open Access Library J 7(02):1
Okot DK, Bilsborrow PE, Phan AN (2019) Briquetting characteristics of bean straw-maize cob blend. Biomass Bioenerg 126:150–158. https://doi.org/10.1016/j.biombioe.2019.05.009
Okot DK, Bilsborrow PE, Phan AN (2022) Thermo-chemical behaviour of maize cob and bean straw briquettes. Energy Convers Manag: X 16:100313. https://doi.org/10.1016/j.ecmx.2022.100313
Okwu MO, Otanocha OB, Samuel OD, Akporhonor EE (2022) Production and characterization of briquettes produced from blend of rice husk and water‐hyacinth. Production technologies for gaseous and solid biofuels. pp 341–355. https://doi.org/10.1002/9781119785842.ch12
Oladosu KO, Babalola SA, Kareem MW, Ajimotokan HA, Kolawole MY, Issa WA, ..., Ponle EA (2023) Optimization of fuel briquette made from bi-composite biomass for domestic heating applications. Sci Afr 21:e01824. https://doi.org/10.1016/j.sciaf.2023.e01824
Otieno AO, Home PG, Raude JM, Murunga SI, Gachanja A (2022) Heating and emission characteristics from combustion of charcoal and co-combustion of charcoal with faecal char-sawdust char briquettes in a ceramic cook stove. Heliyon 8(8). https://doi.org/10.1016/j.heliyon.2022.e10272
Pilusa TJ, Huberts R, Muzenda E (2013) Emissions analysis from combustion of eco-fuel briquettes for domestic applications. J Energy South Afr 24(4):30–36
Sarquah K, Narra S, Beck G, Awafo EA, Antwi E (2022) Bibliometric analysis; characteristics and trends of refuse derived fuel research. Sustainability 14(4):1994. https://doi.org/10.3390/su14041994
Setter C, Ataíde CH, Mendes RF, De Oliveira TJP (2021) Influence of particle size on the physico-mechanical and energy properties of briquettes produced with coffee husks. Environ Sci Pollut Res 28:8215–8223. https://doi.org/10.1007/s11356-020-11124-0
Sonsale AN, Purohit JK, Pohekar SD (2021) Renewable & alternative energy sources for strategic energy management in recycled paper & pulp industry. Bioresource Technol Rep 16:100857. https://doi.org/10.1016/j.biteb.2021.100857
Sun J, Shen Z, Zhang Y, Zhang Q, Wang F, Wang T, ..., Li X (2019) Effects of biomass briquetting and carbonization on PM2.5 emission from residential burning in Guanzhong Plain, China. Fuel 244:379–387. https://doi.org/10.1016/j.fuel.2019.02.031
Suryawan IWK, Septiariva IY, Fauziah EN, Ramadan BS, Qonitan FD, Zahra NL, ..., Lim JW (2022) Municipal solid waste to energy: palletization of paper and garden waste into refuse derived fuel. J Ecol Eng 23(4). https://doi.org/10.12911/22998993/146333
Townsend CL, Maynard RL (2002) Effects on health of prolonged exposure to low concentrations of carbon monoxide. Occup Environ Med 59(10):708–711. https://doi.org/10.1136/oem.59.10.708
Trombley JB, Wang C, Thennadil SN (2023) Model-free measurements of calorific content and ash content of mixed garden wastes using a bomb calorimeter. Fuel 352:129105. https://doi.org/10.1016/j.fuel.2023.129105
Tumuluru JS, Yancey NA, Kane JJ (2021) Pilot-scale grinding and briquetting studies on variable moisture content municipal solid waste bales–impact on physical properties, chemical composition, and calorific value. Waste Manage 125:316–327. https://doi.org/10.1016/j.wasman.2021.02.013
Ullah S, Noor RS, Sanaullah, Gang T (2021) Analysis of biofuel (briquette) production from forest biomass: a socioeconomic incentive towards deforestation. Biomass Convers Biorefinery:1–15. https://doi.org/10.1007/s13399-021-01311-5
Vedagiri P, Martin LJ, Varuvel EG, Subramanian T (2020) Experimental study on NO x reduction in a grapeseed oil biodiesel-fueled CI engine using nanoemulsions and SCR retrofitment. Environ Sci Pollut Res 27:29703–29716
Waheed MA, Akogun OA, Enweremadu CC (2023) Dataset on the performance characteristics of briquettes from selected agricultural wastes using a piston-type briquetting machine. Data Brief 50:109476. https://doi.org/10.1016/j.dib.2023.109476
Zinla D, Gbaha P, Koffi PME, Koua BK (2021) Characterization of rice, coffee and cocoa crops residues as fuel of thermal power plant in Côte d’Ivoire. Fuel 283:119250. https://doi.org/10.1016/j.fuel.2020.119250
Author information
Authors and Affiliations
Contributions
G. Sowndharya: conceptualization, methodology, investigation, resources, writing — original draft. V. Praveena: formal analysis, supervision, validation, visualization.
Corresponding author
Ethics declarations
Ethics approval
Not applicable.
Consent to participate
Not applicable.
Consent for publication
Not applicable.
Competing interests
The authors declare no competing interests.
Additional information
Responsible Editor: Philippe Garrigues
Publisher's Note
Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.
Rights and permissions
Springer Nature or its licensor (e.g. a society or other partner) holds exclusive rights to this article under a publishing agreement with the author(s) or other rightsholder(s); author self-archiving of the accepted manuscript version of this article is solely governed by the terms of such publishing agreement and applicable law.
About this article
Cite this article
Ganesan, S., Vedagiri, P. Production and emission characterization of briquette for sustainable development: MSW transformation. Environ Sci Pollut Res 31, 34340–34354 (2024). https://doi.org/10.1007/s11356-024-33546-w
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s11356-024-33546-w