Skip to main content
Log in

On the Interfacial Flow Over Porous Media Composed of Packed Spheres: Part 1-Identification of the Effective Slip Length

  • Published:
Transport in Porous Media Aims and scope Submit manuscript

Abstract

The effective slip length at the interface between pure fluid flow and porous media composed of packed spheres has been accurately characterized. In this study, as the first part of a two-part series, the slip length is obtained by matching the flow rate over the actual packed spheres from a direct simulation with that over an effective smooth surface using the Navier-slip boundary condition from analytic solution. Three classical packing structures, e.g., simple cubic (SC), face-centered cubic (FCC), and body-centered cubic (BCC), are employed. The accuracy of the slip length is validated by comparing the velocity field of flow over the actual porous architecture and over the effective smooth surface. We report that the slip length is best described as a function of the free slip area, rather than conventional variables such as solid volume fraction and packing structure, with the error less than 7.5%. Then, the effective smooth surface with the slip length is applied to describe two flow problems: a stick–slip–stick flow and channel flow. The slip velocity as well as its slope at the interface and the velocity profile within the pure fluid channel is accurately reproduced. In Part 2, effective slip length will be employed to characterize optimal effective viscosity and stress jump coefficient in the Stokes–Brinkman approach, which can be applied for industrial and natural flows in dual-scale porous media in predicting flow solutions inside and outside the porous media.

This is a preview of subscription content, log in via an institution to check access.

Access this article

Price excludes VAT (USA)
Tax calculation will be finalised during checkout.

Instant access to the full article PDF.

Fig. 1
Fig. 2
Fig. 3
Fig. 4
Fig. 5
Fig. 6
Fig. 7
Fig. 8
Fig. 9
Fig. 10
Fig. 11
Fig. 12
Fig. 13
Fig. 14
Fig. 15
Fig. 16

Similar content being viewed by others

References

  • Bear, J., Verruijt, A.: Modeling Groundwater Flow and Pollution. Springer, Berlin (2012)

    Google Scholar 

  • Beavers, G.S., Joseph, D.D.: Boundary conditions at a naturally permeable wall. J. Fluid Mech. 30(1), 197–207 (1967)

    Google Scholar 

  • Carman, P.C.: Fluid flow through granular beds. Chem. Eng. Res. Des. 75, S3–S48 (1997)

    Google Scholar 

  • Chellam, S., Wiesner, M.R.: Slip flow through porous media with permeable boundaries: implications for the dimensional scaling of packed beds. Water Environ. Res. 65(6), 744–749 (1993)

    Google Scholar 

  • Cohen, Y., Cheng-Nian, C.: The flow of microemulsions through packed beds and capillary tubes. Chem. Eng. Commun. 28(1–3), 73–84 (1984)

    Google Scholar 

  • Davis, R.H., Stone, H.A.: Flow through beds of porous particles. Chem. Eng. Sci. 48(23), 3993–4005 (1993)

    Google Scholar 

  • Gangloff Jr., J.J., Hwang, W.R., Advani, S.G.: Characterization of bubble mobility in channel flow with fibrous porous media walls. Int. J. Multiph. Flow 60, 76–86 (2014)

    Google Scholar 

  • Gangloff Jr., J.J., Hwang, W.R., Advani, S.G.: The investigation of bubble mobility in channel flow with wavy porous media walls. Int. J. Multiph. Flow 70, 1–14 (2015)

    Google Scholar 

  • Happel, J.: Viscous flow in multiparticle systems: slow motion of fluids relative to beds of spherical particles. AIChE J. 4(2), 197–201 (1958)

    Google Scholar 

  • Hsu, C.T., Cheng, P.: A singular perturbation solution for Couette flow over a semi-infinite porous bed. J. Fluids Eng. 113(1), 137–142 (1991)

    Google Scholar 

  • Hwang, W.R., Advani, S.G., Walsh, S.: Direct simulations of particle deposition and filtration in dual-scale porous media. Compos. A Appl. Sci. Manuf. 42(10), 1344–1352 (2011)

    Google Scholar 

  • Jafari, A., Zamankhan, P., Mousavi, S.M., Pietarinen, K.: Modeling and CFD simulation of flow behavior and dispersivity through randomly packed bed reactors. Chem. Eng. J. 144(3), 476–482 (2008)

    Google Scholar 

  • James, D.F., Davis, A.M.: Flow at the interface of a model fibrous porous medium. J. Fluid Mech. 426, 47–72 (2001)

    Google Scholar 

  • Jang, H.K., Kim, Y.J., Woo, N.S., Hwang, W.R.: Tensorial Navier-slip boundary conditions for patterned surfaces for fluid mixing: numerical simulations and experiments. AIChE J. 62(12), 4574–4585 (2016)

    Google Scholar 

  • Liu, Q., Prosperetti, A.: Pressure-driven flow in a channel with porous walls. J. Fluid Mech. 679, 77–100 (2011)

    Google Scholar 

  • Lu, J., Jang, H.K., Lee, S.B., Hwang, W.R.: Characterization on the anisotropic slip for flows over unidirectional fibrous porous media for advanced composites manufacturing. Composites A Appl Sci Manuf 100, 9–19 (2017)

    Google Scholar 

  • Martins, A.A., Laranjeira, P.E., Braga, C.H., Mata, T.M.: Modeling of transport phenomena in porous media using network models. In: Tian, K.S., Shu, H.-J. (eds.) Progress in Porous Media Research. Nova Science Publishers, New York (2009)

    Google Scholar 

  • Palle, S., Aliabadi, S.: Computational study of no-slip and rarefied slip flows in infinite structured porous media. Comput. Fluids 136, 485–496 (2016)

    Google Scholar 

  • Rajesh Kumar, P., Ramesh Babu, V.: Effect of complete slip on peristaltic transport of Jeffrey fluid flow in a tappered channel with suction and junction. Int J Mech Eng Technol 10(2), 551–560 (2019)

    Google Scholar 

  • Rogers, B.J., Wirth, M.J.: Slip flow through colloidal crystals of varying particle diameter. ACS Nano 7(1), 725–731 (2012)

    Google Scholar 

  • Saffman, P.G.: On the boundary condition at the surface of a porous medium. Stud Appl Math 50(2), 93–101 (1971)

    Google Scholar 

  • Sahraoui, M., Kaviany, M.: Slip and no-slip velocity boundary conditions at interface of porous, plain media. Int. J. Heat Mass Transf. 35(4), 927–943 (1992)

    Google Scholar 

  • Saleh, S., Thovert, J.F., Adler, P.M.: Flow along porous media by particle image velocimetry. AIChE J. 39(11), 1765–1776 (1993)

    Google Scholar 

  • Sangani, A.S., Behl, S.: The planar singular solutions of Stokes and Laplace equations and their application to transport processes near porous surfaces. Phys Fluids A Fluid Dyn 1(1), 21–37 (1989)

    Google Scholar 

  • Wang, J.F., Hwang, W.R.: Permeability prediction of fibrous porous media in a bi-periodic domain. J. Compos. Mater. 42(9), 909–929 (2008)

    Google Scholar 

  • Wu, Z., Rogers, B.J., Wei, B., Wirth, M.J.: Insights from theory and experiments on slip flow in chromatography. J. Sep. Sci. 36(12), 1871–1876 (2013)

    Google Scholar 

  • Yergey, B.A., Beninati, M., Marshall, J.S.: Sensitivity of incipient particle motion to fluid flow penetration depth within a packed bed. Sedimentology 57(2), 418–428 (2010)

    Google Scholar 

Download references

Acknowledgements

The authors acknowledge financial supports from the National Research Foundation of Korea (NRF-2019R1A2C1003974) and the Fundamental Research Program (PNK6160) of the Korea Institute of Materials Science (KIMS).

Author information

Authors and Affiliations

Authors

Corresponding author

Correspondence to Wook Ryol Hwang.

Additional information

Publisher's Note

Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.

Rights and permissions

Reprints and permissions

About this article

Check for updates. Verify currency and authenticity via CrossMark

Cite this article

Lu, J.G., Cho, S.C. & Hwang, W.R. On the Interfacial Flow Over Porous Media Composed of Packed Spheres: Part 1-Identification of the Effective Slip Length. Transp Porous Med 133, 139–157 (2020). https://doi.org/10.1007/s11242-020-01418-9

Download citation

  • Received:

  • Accepted:

  • Published:

  • Issue Date:

  • DOI: https://doi.org/10.1007/s11242-020-01418-9

Keywords

Navigation