Skip to main content
SpringerLink
Log in

Brittle Fracture Resistance of the Reflection Shield of a WWER-1000 Reactorunder Normal Operating and Emergency Conditions

  • Published:
Strength of Materials Aims and scope

To date, most WWER-1000 nuclear power units in Ukraine have reached the end of their design life (30 years). In view of this, work is under way to extend the service life of critical equipment elements beyond the design life (to up to 60 years). In addition to reactor vessels, these critical elements include vessel internals (VI). One of the key approaches in such works is a predictive assessment of the structural integrity of VI structures using mathematical modeling of physical processes typical for power unit operation under intense radiation exposure of structural material. The service life prediction methodology constantly requires refining and taking into account more factors affecting structural integrity. The paper considers the kinetics of changes in the stress intensity factor for postulated cracks in the reflection shield of WWER-1000 VIs during long-term operation and at the time of reactor emergency during the rupture of primary coolant circuit pipelines with a nominal diameter of 100 to 850 mm in the most dangerous areas in terms of brittle fracture resistance. A significant impact of taking into account the residual stresses formed as a result of welding and heat treatment of the reflection shield during manufacturing on the results of calculating the brittle fracture resistance was revealed, which may affect the conservatism of assessment methods when justifying long-term operation.

This is a preview of subscription content, log in via an institution to check access.

Access this article

Log in via an institution

Price excludes VAT (USA)
Tax calculation will be finalised during checkout.

Instant access to the full article PDF.

Institutional subscriptions

Fig. 1.
Fig. 2.
Fig. 3.
Fig. 4.
Fig. 5.
Fig. 6.
Fig. 7.
Fig. 8.
Fig. 9.
Fig. 10.

Similar content being viewed by others

References

  1. A. Y. Chirkov and V. V. Kharchenko, “Special features of computational assessment of the change in shape of WWER-1000 reactor core baffle in view of irradiation-induced swelling,” Strength Mater, 52, No. 3, 339-352 (2020). https://doi.org/10.1007/s11223-020-00184-9

    Article  CAS  Google Scholar 

  2. O. V. Makhnenko and S. M. Kandala, “Computational assessment of the brittle fracture resistance of the reflection shield of a VVER-1000 reactor during operation with allowance for residual process stresses,” Tekhn. Diagn. Neruiniv. Kontrol, No. 3, 3–11 (2022). https://doi.org/10.37434/tdnk2022.03.01

  3. O. V. Makhnenko and S. M. Kandala, “Influence of residual process stresses on the brittle fracture resistance of the reflection shield of a VVER-1000 reactor under emergency conditions,” Tekhn. Diagn. Neruiniv. Kontrol, No. 4, 12–16 (2022). https://doi.org/10.37434/tdnk2022.04.02

  4. O. V. Makhnenko, I. V. Mirzov, and V. B. Porokhonko, “Modelling of residual stresses, radiation swelling and stressed state of in-service WWER-1000 reactor baffle,” The Paton Welding J, No. 4, 32-38 (2016). https://doi.org/10.15407/tpwj2016.04.03

  5. STP 26.260.484-2004. Heat Treatment of Corrosion-Resistant Steels and Iron-Nickel-Base Alloys in Chemical Engineering [in Russian], NIIKhIMMASH OJSC (2004).

  6. O. Makhnenko, S. Kandala, and N. Basistyuk, “Influence of the heat transfer coefficient on the level of residual stress after heat treatment of the VVER-1000 reactor baffle,” Mech Adv Technol, 5, No. 2, 254–259 (2021). https://doi.org/10.20535/2521-1943.2021.5.2.245074

  7. V. Pištora, M. Švrček, P. Ferko, and I. Mirzov, “Fracture mechanical assessment of VVER reactor internals,” in: ASME 2018 Pressure Vessels and Piping Conf. (Prague, Czech Republic, July 2018). https://doi.org/10.1115/PVP2018-84589

  8. O. V. Makhnenko, S. M. Kandala, N. R. Basystyuk, and M. V. Cherkashin, “Mathematical modeling of residual stresses in WWER-1000 elements after heat treatment,” The Paton Welding J, No. 3, 9–15 (2021). https://doi.org/10.37434/tpwj2021.03.02

  9. Guidelines for Integrity and Lifetime Assessment of Components and Piping in WWER Nuclear Power Plants (VERLIFE), Annex G to Appendix C, Swelling of RVI Materials, International Atomic Energy Agency, Vienna (2014).

  10. PM-T.0.03.333-15. Standard Program for the Assessment of the Technical Condition and Life Extension of the Vessel Internals of a WWER-1000 Reactor [in Russian], Energoatom, Kiev (2015).

  11. PNAE G-7-002-86. Strength Design Standards for the Equipment and Pipelines of Nuclear Power Plants [in Russian], Energoatomizdat, Moscow (1989).

Download references

Author information

Authors and Affiliations

  1. Paton Institute of Electric Welding, National Academy of Sciences of Ukraine, Kyiv, Ukraine

    O. V. Makhnenko & S. M. Kandala

Authors
  1. O. V. Makhnenko
    View author publications

    You can also search for this author in PubMed Google Scholar

  2. S. M. Kandala
    View author publications

    You can also search for this author in PubMed Google Scholar

Corresponding author

Correspondence to O. V. Makhnenko.

Additional information

Translated from Problemy Mitsnosti, No. 6, p. 24 – 36, November – December, 2023.

Rights and permissions

Springer Nature or its licensor (e.g. a society or other partner) holds exclusive rights to this article under a publishing agreement with the author(s) or other rightsholder(s); author self-archiving of the accepted manuscript version of this article is solely governed by the terms of such publishing agreement and applicable law.

Reprints and permissions

About this article

Check for updates. Verify currency and authenticity via CrossMark

Cite this article

Makhnenko, O.V., Kandala, S.M. Brittle Fracture Resistance of the Reflection Shield of a WWER-1000 Reactorunder Normal Operating and Emergency Conditions. Strength Mater (2024). https://doi.org/10.1007/s11223-024-00602-2

Download citation

  • Received:

  • Published:

  • DOI: https://doi.org/10.1007/s11223-024-00602-2

Keywords

Search

Navigation