The structure and phase composition of a subsurface layer of TiNi alloy modified in the mode of pulsed melting with a microsecond low-energy (to ~40 keV) high-current (to ~50 kA) electron beam is investigated. The influence of the number of pulses at a constant energy density on the characteristics of structure, phasecomposition changes, and behavior of the phase distribution near the surface is considered. The role of oxygen in the columnar structure stabilization of the recrystallized surface layer is discussed.
Similar content being viewed by others
References
T. Yoneyama and S. Miyazaki, Shape Memory Alloys for Biomedical Applications, CRC Press, Cambridge (2009).
K. Yamauchi, I. Ohkata, K. Tsuchiya, et al., Shape Memory and Superelastic Alloys: Applications and Technologies, Woodhead Publ., Cambridge (2011).
J. Frenzel et al., J. Alloys Compounds, 385, 214–223 (2004).
J. Otubo et al., Mater. Sci. Eng. A, 438, 679–682 (2006).
L. Neelakantan, B. Monchev, M. Frotscher, et al., Mater. Corros., 63, 979–984 (2012).
M. Rahim, J. Frenzel, M. Frotscher, et al., Acta Mater., 61, 3667–3686 (2013).
Y. Pauleau, Materials Surface Processing by Directed Energy Techniques, Elsevier, Amsterdam (2006).
K. M. Zhang, D. Z. Yang, J. X. Zou, et al., Surf. Coат. Technol., 201, 3096–310 (2006).
M. F. Maitz, Shape Memory Alloys for Biomedical Applications. Chapter 8: Surface Modification of Ti–Ni Alloys for Biomedical Applications (Eds. T. Yoneyama and S. Miyazaki), CRC Press, Boca Raton Boston New York Washington, DC, Woodhead publishing Limited, Cambridge, England (2009).
T. R. Rautray, R. Narayanan, and K.-H. Kim, Prog. Mater. Sci., 56, 1137–1177 (2011).
L. L. Meisner, V. P. Sivokha, A. I. Lotkov, et al., Physica B, 307, 251–257 (2001).
L. Tan and W. C. Crone, Acta Mater., 50, 4449–4460 (2002).
J. X. Zou, T. Grosdidier, K. M. Zhang, et al., Eur. Phys. J. Appl. Phys., 43, 327–331 (2008).
L. Meisner et al., J. Nanotech., 2010, 1–8 (2010).
L. L. Meisner et al., Surf. Coat Technol., 302, 495–506 (2016).
G. Lipson and G. Stipple, Interpretation of Powder X-ray Diffraction Patterns, Mir, Moscow (1972)
A. A. Neiman, L. L. Meisner, A. I. Lotkov, et al., Appl. Surf. Sci., 327, 321–326 (2015).
G. A. Yurko, J. W. Barton, and J. G. Parr, Trans. Metallurg. Soc. AIME, 212, 698–700 (1958).
O. V. Artoshina, F. O. Milovich, A. Rossow, et al., Inorganic Materials, 52, No. 9, 945–954 (2016).
K. Otsuka and X. Ren, Prog. Mater. Sci., 50, 511–678 (2005).
V. G. Chuprina and I. M. Shalya, Powder Metallurg. Metal Ceram., 41, 85–89 (2002).
E. K. Molchanova, Atlas of State Diagrams of Titanium Alloys [in Russian], Mashinostroyeniye, Moscow (1964).
K. Otsuka and C. M. Wayman, Shape Memory Materials, CUP, Cambridge (1998).
Author information
Authors and Affiliations
Corresponding author
Additional information
Translated from Izvestiya Vysshikh Uchebnykh Zavedenii, Fizika, No. 8, pp. 112–120, August, 2019.
Rights and permissions
About this article
Cite this article
Meisner, L.L., Neiman, A.A., Semin, V.O. et al. Multilayer Surface-Area Structure and the Influence of Residual Oxygen on its Formation During Irradiation of TiNi Alloy with a Low-Energy High-Current Electron Beam. Russ Phys J 62, 1428–1437 (2019). https://doi.org/10.1007/s11182-019-01860-3
Received:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s11182-019-01860-3