Skip to main content
Log in

Synchrotron Radiation in Analysis of Structural Transformations Under Friction Conditions of Carbon Steel

  • Published:
Russian Physics Journal Aims and scope

The paper presents results of the structural transformations in the surface of carbon steel specimens during the first tens of cycles of the friction loading with a hard-alloy indenter. The widespread type AISI 1020 carbon steel is used in the experiments which are carried out on the Microfocus Beamline ID13 of the European Synchrotron Radiation Facility. The experimental setup is designed to record the diffraction patterns during the friction. It is shown that at the initial stage of friction, the diffraction maxima significantly broaden due to the defect accumulation in the crystal lattice and, as a consequence, the growth in elastic micro-distortions and the size reduction of the coherent scattering areas. A serious increase is observed in the intensity of reflection from planes of {110} family due to the formation of the respective texture in the surface layers of steel specimens. A non-destructive method is used to detect the diffraction patterns both for non-moving and moving specimens.

This is a preview of subscription content, log in via an institution to check access.

Access this article

Price excludes VAT (USA)
Tax calculation will be finalised during checkout.

Instant access to the full article PDF.

Similar content being viewed by others

References

  1. S. V. Burov, Obrabotka Metallov (Tekhnologiya, Oborudovanie, Instrumenty), No. 4, 26–27 (2005).

  2. A. G. Sokolov and E. E. Bobylev, Obrabotka Metallov (Tekhnologiya, Oborudovanie, Instrumenty), No. 1(66), 60–68 (2015).

  3. S. V. Burov, Obrabotka Metallov (Tekhnologiya, Oborudovanie, Instrumenty), No. 3, 27–29 (2006).

  4. S. Kajita, K. Yagi, T. Izumi, et al., Tribology Lett., 57, No. 6, 11 (2015).

    Google Scholar 

  5. S. Kajita, T. Izumi, J. Koyamachi, et al., Tribology Lett., 61, No. 19, 16 (2016)

    Google Scholar 

  6. D. E. Butorin, V. G. Burov, I. A Bataev., et al., Russ. Phys. J., 60, No. 5, 817–820 (2017).

    Article  Google Scholar 

  7. J. Kieffer and J. P. Wright, Powder Diffraction, 28, No. S2, S339–S350 (2013).

    Article  ADS  Google Scholar 

  8. M. X. Jia, Y. P. Lü, L. F. Xu, and Y. P. Song, Steel Res. Int., 84, No. 8, 761–766 (2013).

    Article  Google Scholar 

  9. D. R. Wheeler and D. H. Buckley, Wear, 33, 65–74 (1975).

    Article  Google Scholar 

  10. L. I. Tushinskii, Structural Strength Theory of Materials [in Russian], NSTU, Novosibirsk (2004).

    Google Scholar 

  11. P. Scherrer, Nachrichten von der Gesellschaft der Wissenschaften zu Göttingen. Mathematisch-Physikalische Klasse, 1918, 98–100 (1918).

    Google Scholar 

  12. A. R. Stokes and A. J. C. Wilson, Proc. Phys. Soc., 56, 174–181 (1944).

    Article  ADS  Google Scholar 

  13. G. K. Williamson and W. H. Hall, Acta Metall., 1, 22–31 (1953).

    Article  Google Scholar 

  14. H. M. J. Rietveld, Appl. Crystallogr., 2, 65–71 (1969).

    Article  Google Scholar 

Download references

Author information

Authors and Affiliations

Authors

Corresponding author

Correspondence to I. A. Bataev.

Additional information

Translated from Izvestiya Vysshikh Uchebnykh Zavedenii, Fizika, No. 3, pp. 93–99, March, 2018.

Rights and permissions

Reprints and permissions

About this article

Check for updates. Verify currency and authenticity via CrossMark

Cite this article

Bataev, I.A., Bataev, A.A., Lazurenko, D.V. et al. Synchrotron Radiation in Analysis of Structural Transformations Under Friction Conditions of Carbon Steel. Russ Phys J 61, 503–508 (2018). https://doi.org/10.1007/s11182-018-1426-2

Download citation

  • Received:

  • Revised:

  • Published:

  • Issue Date:

  • DOI: https://doi.org/10.1007/s11182-018-1426-2

Keywords

Navigation