The effect of the dispersion and thermophysical properties of the filler on the characteristics and aging of the UP5-162 epoxy compound is investigated. It is shown that the particle size and homogeneity of filler distribution affect significantly the internal mechanical stresses during compound curing. Thermal aging of the compound and resistance to thermal stresses are significantly influenced by the thermal conductivity and heat capacity of filler particles. The necessary condition of high mechanical properties and resistance to thermal aging of the compound is a narrow dispersion of filler particles.
Similar content being viewed by others
References
A. I. Galushko, I. S. Maksimova, and R. G. Osnach, Reliability of Insulation of Electric Machines [in Russian], Energiya, Moscow (1979).
S. A. Yamanov and L. V. Yamanova, Aging, Resistence, and Reliability of Electric Insulation [in Russian], Energoatomizdat, Moscow (1990).
V. K. Kryzhanovski, V. V. Burlov, A. D. Panimatchenko, and Yu. V. Kryzhanovskaya, Technical Properties of Polymeric Materials: Education and Reference Handbook, Publishing House “Professiya,” Saint Petersburg (2003).
I. D. Simonov-Emel’yanov, V. N. Kuleznev, and L. Z. Trofimycheva, Plast. Massy, No. 5, 61–64 (1989).
A. I. Galushko, Internal Stresses in Potting Compounds of Radio-Electronic Equipment [in Russian], Sovetskoe Radio, Moscow (1974).
A. T. Sanzharovskii, Physicomechanical Properties of Polymeric and Paintwork Coatings [in Russian], Khimiya, Moscow (1978).
A. T. Sanzharovskii, Metods of Determining the Mechanical and Adhesive Properties of Polymer Coatings [in Russian], Nauka, Moscow (1974).
A. I. Galushko and R. G. Osnach, Elektromekhanich. Mater., No. 9 (1973).
Author information
Authors and Affiliations
Corresponding author
Additional information
Translated from Izvestiya Vysshikh Uchebnykh Zavedenii, Fizika, No. 5, pp. 111–116, May, 2016.
Rights and permissions
About this article
Cite this article
Kim, S.V., Ushakov, V.Y. Dependence of Some Physical Characteristics of Epoxy Compounds on the Filler Parameters. Russ Phys J 59, 729–735 (2016). https://doi.org/10.1007/s11182-016-0828-2
Received:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s11182-016-0828-2