Influence of the thermal treatment conditions and composition of bimetallic catalysts Fe—Pd/SiO₂ on the catalytic properties in phenylacetylene hydrogenation

Abstract

The supported bimetallic Fe—Pd/SiO₂ catalysts with the different Fe (0.025—8 mass.%) and Pd (0.05—3.2 mass.%) loadings were synthesized by the incipient wetness impregnation of support. The samples were heat-treated under different conditions (calcination in air at 240—350 °C or reduction in an H₂ flow at 400 °C). The X-ray phase analysis revealed the formation of Pd⁰, α-Fe₂O₃ and Fe₃O₄ phases after calcination of the samples at 240—260 °C. The reduction of the calcined Fe—Pd samples in an H₂ flow at 400 °C enables the formation of Fe⁰ nanoparticles of size 17—20 nm. The synthesized catalytic systems were studied in the selective hydrogenation of phenylacetylene at room temperature and atmospheric pressure in a solvent (ethanol, propanol). The catalytic properties of the Fe—Pd catalysts depend on the nature of solvent, catalyst composition, and thermal treatment conditions. The application of the Fe—Pd bimetallic catalysts with a low Pd loading of 0.05—0.1 mass.% made it possible to reach the high activity and selectivity to styrene (91%) at the complete conversion of phenylacetylene.