We study the problem of evaluation of the influence of design of the metal receiver of a large-capacity tundish of slab continuous-casting machine on the decrease in the turbulence of flows in the case of deviation of the metal stream from the required position in the process of casting. We present the results of computer simulations of various types of deviations from the target point of input for the metal stream flowing from the steel-teeming ladle into the tundish. We perform the comparison of the distributions of metal flows in tundishes with metal receivers of different designs. We also give recommendations concerning the possibilities of weakening of the turbulence of flows in the analyzed cases.
Similar content being viewed by others
References
S. V. Sukharev, A. V. Zabolotskii, P. V. Kotrovskii, and M. Yu. Turchin, “Influence of the design of metal receivers of slab continuous-casting machines on the motion of flow in the tundish in the case of deviations of the metal stream from the required position. Part I. Statement of the problem,” Refract. Ind. Ceram., 60(6), 535 – 538 (2020).
S. V. Sukharev, A. V. Zabolotskii, P. V. Kotrovsky, and M. Yu. Turchin, “Influence of the design of metal receivers of slab continuous-casting machines on the motion of flow in the tundish in the case of deviations of the metal stream from the required position. Part II. Procedure of Simulation,” Refract. Ind. Ceram., 60(6), 539 – 542 (2020).
L. M. Aksel’rod, I. V. Kushnerev, S. V. Sukharev, and A. V. Zabolotskii, “Production of a pure steel and contemporary refractory technologies,” Novye Ogneup., No. 7, 3 – 11 (2017).
Author information
Authors and Affiliations
Corresponding author
Additional information
Translated from Novye Ogneupory, No. 1, pp. 5 – 8, January, 2020.
Ending. Parts I and II of the present work were published in REFR-6(2019)
Rights and permissions
About this article
Cite this article
Sukharev, S.V., Zabolotskii, A.V., Kotrovskii, P.V. et al. Influence of the Design of Metal Receivers of Slab Continuous-Casting Machines on the Motion of Flow in the Tundish in the Case of Deviations of the Metal Stream from the Required Position. Part III. Results of Investigations. Refract Ind Ceram 61, 1–4 (2020). https://doi.org/10.1007/s11148-020-00421-3
Received:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s11148-020-00421-3