Abstract
Amongst various avenues being searched for solving the menace of increasing amount of plastic accumulation, its use in hot mix asphalt (HMA) is becoming popular. Several research studies have been conducted since the 1980s on the use of different types of waste plastics in asphalt mixtures through dry and wet processes. While it may seem ‘simple’ and ‘attractive’, incorporation of waste plastic in asphalt mixtures is plagued with many challenges. This paper summarizes the works of the available literature on the use of waste plastics in asphalt mixture. The selection of dry or wet process is highly dependent on type, density, size and melting point of waste plastic, to create a homogeneous mixture. Physical, rheological, and morphological properties of asphalt binder are effectively altered by the use of waste plastics. This is in turn is a function of various parameters such as type of plastic and base asphalt binder, dosages used, use of compatibilizers and other polymers, production process, etc. Similarly, the performance of waste plastic modified asphalt mixture is found to vary considerably. While the stiffness characteristics of HMA is improved by incorporation of waste plastic, more studies on in-field performance and environmental concerns are desirable. To make the use of waste plastic in HMA a ‘success story’, there is a need to carry out fundamental research to generate a unified solution.
Similar content being viewed by others
References
Abed, A.H., Bahia, H.U.: Enhancement of permanent deformation resistance of modified asphalt concrete mixtures with nano-high density polyethylene. Constr. Build. Mater. 236, 117604 (2020). https://doi.org/10.1016/j.conbuildmat.2019.117604
Ahmadinia, E., Zargar, M., Karim, M.R., Abdelaziz, M., Shafigh, P.: Using waste plastic bottles as additive for stone mastic asphalt. Mater. Des. 32, 4844–4849 (2011). https://doi.org/10.1016/j.matdes.2011.06.016
Ahmadinia, E., Zargar, M., Karim, M.R., Abdelaziz, M., Shafigh, P.: Using waste plastic bottles as additive for stone mastic asphalt. Mater. Des. 32, 4844–4849 (2011). https://doi.org/10.1016/J.MATDES.2011.06.016
Al-Hadidy, A.I., Yi-qiu, T.: Effect of polyethylene on life of flexible pavements. Constr. Build. Mater. 23, 1456–1464 (2009). https://doi.org/10.1016/J.CONBUILDMAT.2008.07.004
Ameli, A., Maher, J., Mosavi, A., Nabipour, N., Babagoli, R., Norouzi, N.: Performance evaluation of binders and stone matrix asphalt (SMA) mixtures modified by ground tire rubber (GTR), waste polyethylene terephthalate (PET) and anti stripping agents (ASAs). Constr. Build. Mater. 251, 118932 (2020). https://doi.org/10.1016/j.conbuildmat.2020.118932
Ameri, M., Nasr, D.: Properties of asphalt modified with devulcanized polyethylene terephthalate. Pet. Sci. Technol. 34, 1424–1430 (2016). https://doi.org/10.1080/10916466.2016.1202968
Ameri, M., Nasr, D.: Performance properties of devulcanized waste PET modified asphalt mixtures. Pet. Sci. Technol. 35, 99–104 (2017). https://doi.org/10.1080/10916466.2016.1251457
Assaf, H., Abu Abdo, A.: Life cycle assessment of incorporating recycled materials in pavement design. J. King Saud Univ., Eng. Sci. (2022). https://doi.org/10.1016/J.JKSUES.2022.04.001
Attaelmanan, M., Feng, C.P., Ai, A.H.: Laboratory evaluation of HMA with high density polyethylene as a modifier. Constr. Build. Mater. 25, 2764–2770 (2011). https://doi.org/10.1016/J.CONBUILDMAT.2010.12.037
Audy, R., Enfrin, M., Boom, Y.J., Giustozzi, F.: Selection of recycled waste plastic for incorporation in sustainable asphalt pavements: a novel multi-criteria screening tool based on 31 sources of plastic. Sci. Total Environ. 829, 154604 (2022). https://doi.org/10.1016/J.SCITOTENV.2022.154604
Baghaee Moghaddam, T., Karim, M.R., Syammaun, T.: Dynamic properties of stone mastic asphalt mixtures containing waste plastic bottles. Constr. Build. Mater. 34, 236–242 (2012). https://doi.org/10.1016/j.conbuildmat.2012.02.054
Baghaee Moghaddam, T., Soltani, M., Karim, M.R.: Evaluation of permanent deformation characteristics of unmodified and polyethylene terephthalate modified asphalt mixtures using dynamic creep test. Mater. Des. 53, 317–324 (2014a). https://doi.org/10.1016/j.matdes.2013.07.015
Baghaee Moghaddam, T., Soltani, M., Karim, M.R.: Experimental characterization of rutting performance of polyethylene terephthalate modified asphalt mixtures under static and dynamic loads. Constr. Build. Mater. 65, 487–494 (2014b). https://doi.org/10.1016/j.conbuildmat.2014.05.006
Baghaee Moghaddam, T., Soltani, M., Karim, M.R.: Stiffness modulus of polyethylene terephthalate modified asphalt mixture: a statistical analysis of the laboratory testing results. Mater. Des. 68, 88–96 (2015a). https://doi.org/10.1016/j.matdes.2014.11.044
Baghaee Moghaddam, T., Soltani, M., Karim, M.R., Baaj, H.: Optimization of asphalt and modifier contents for polyethylene terephthalate modified asphalt mixtures using response surface methodology. Meas. J. Int. Meas. Confed. 74, 159–169 (2015b). https://doi.org/10.1016/j.measurement.2015.07.012
Baghaee Moghaddam, T., Soltani, M., Karim, M.R., Shamshirband, S., Petković, D., Baaj, H.: Estimation of the rutting performance of polyethylene terephthalate modified asphalt mixtures by adaptive neuro-fuzzy methodology. Constr. Build. Mater. 96, 550–555 (2015). https://doi.org/10.1016/j.conbuildmat.2015.08.043
Biswas, A., Goel, A., Potnis, S.: Performance comparison of waste plastic modified versus conventional bituminous roads in Pune city: a case study. Case Stud. Constr. Mater. 13, e00411 (2020). https://doi.org/10.1016/J.CSCM.2020.E00411
Boom, Y.J., Enfrin, M., Xuan, D.L., Grist, S., Robert, D., Giustozzi, F.: Laboratory evaluation of PAH and VOC emission from plastic-modified asphalt. J. Clean. Prod. 377, 134489 (2022). https://doi.org/10.1016/J.JCLEPRO.2022.134489
Boom, Y.J., Enfrin, M., Grist, S., Giustozzi, F.: Analysis of possible carcinogenic compounds in recycled plastic modified asphalt. Sci. Total Environ. 858, 159910 (2023). https://doi.org/10.1016/J.SCITOTENV.2022.159910
Canestrari, F., Formela, K., Hesp, S., Xu, F., Zhao, Y., Li, K.: Using waste plastics as asphalt modifier: a review. Materials 15, 110 (2021). https://doi.org/10.3390/MA15010110
Casado Barrasa, R., Sáez Caballero, E., Castro Fresno, D., Verdejo Andrés, E., Núñez Fernandez, M.: POLYMIX: polymeric waste in asphalt mixes (2014)
Casey, D., McNally, C., Gibney, A., Gilchrist, M.D.: Development of a recycled polymer modified binder for use in stone mastic asphalt. Resour. Conserv. Recycl. 52, 1167–1174 (2008). https://doi.org/10.1016/J.RESCONREC.2008.06.002
Chaffin, C.W., O’Connor, D.L., Hughes, C.H.: Evaluation of the use of certain elastomers in asphalt. TRB (1978). https://trid.trb.org/view/83367. Accessed 30 Apr 2022
Cheng, Y., Han, H., Fang, C., Li, H., Huang, Z., Su, J.: Preparation and properties of nano-CaCO3/waste polyethylene/styrene-butadiene-styrene block polymer-modified asphalt. Polym. Compos. 41, 614–623 (2020). https://doi.org/10.1002/pc.25392
Costa, L.M.B., Silva, H.M.R.D., Oliveira, J.R.M., Fernandes, S.R.M.: Incorporation of waste plastic in asphalt binders to improve their performance in the pavement. Int. J. Pavement Res. Technol. 6, 457–464 (2013). https://doi.org/10.6135/ijprt.org.tw/2013.6(4).457
Costa, L., Fernandes, S., Silva, H., Oliveira, J., Miranda, R.: Mechanical analysis of asphalt mixtures produced with waste plastic modified binders. In: Proc. 6th Int. Conf. Mech. Mater. Des., pp. 26–30 (2015)
Costa, L.M.B., Peralta, J., Oliveira, J.R.M., Silva, H.M.R.D.: A new life for cross-linked plastic waste as aggregates and binder modifier for asphalt mixtures. Appl. Sci. 7, 1–16 (2017). https://doi.org/10.3390/app7060603
Dalhat, M.A., Adesina, A.Y.: Utilization of micronized recycled polyethylene waste to improve the hydrophobicity of asphalt surfaces. Constr. Build. Mater. 240, 117966 (2020). https://doi.org/10.1016/j.conbuildmat.2019.117966
Dalhat, M.A., Wahhab, H.I.A.-A.: Performance of recycled plastic waste modified asphalt binder in Saudi Arabia. Int. J. Pavement Eng. 18, 349–357 (2017). https://doi.org/10.1080/10298436.2015.1088150
Dalhat, M.A., Al-Abdul Wahhab, H.I., Al-Adham, K.: Recycled plastic waste asphalt concrete via mineral aggregate substitution and binder modification. J. Mater. Civ. Eng. 31, 04019134 (2019). https://doi.org/10.1061/(asce)mt.1943-5533.0002744
Dalhat, M.A., Al-Adham, K., Adesina, A.Y.: High-temperature performance of recycled low-density polyethylene-modified asphalt binder reinforced with thermally treated polyacrylonitrile fiber. Arab. J. Sci. Eng. 45, 4257–4272 (2020). https://doi.org/10.1007/s13369-020-04431-8
Daly, W., Chiu, Z.Q., Negulescu, I.: Preparation and characterization of asphalt-modified polyethylene blends. TRB (1993). https://trid.trb.org/view/382179. Accessed 29 May 2022
de Arimateia Almeida e Silva, J., Kennedy Guedes Rodrigues, J., de Carvalho, M.W., de Figueredo Lopes Lucena, L.C., Cavalcante, E.H.: Mechanical performance of asphalt mixtures using polymer-micronized PET-modified binder. Road Mater, Pavement Des. 19, 1001–1009 (2018). https://doi.org/10.1080/14680629.2017.1283353
Dehghan, Z., Modarres, A.: Evaluating the fatigue properties of hot mix asphalt reinforced by recycled PET fibers using 4-point bending test. Constr. Build. Mater. 139, 384–393 (2017). https://doi.org/10.1016/j.conbuildmat.2017.02.082
Du, Y., Liu, P., Wang, J., Wang, H., Hu, S., Tian, J., Li, Y.: Laboratory investigation of phase change effect of polyethylene glycolon on asphalt binder and mixture performance. Constr. Build. Mater. 212, 1–9 (2019). https://doi.org/10.1016/j.conbuildmat.2019.03.308
El-Naga, I.A., Ragab, M.: Benefits of utilization the recycle polyethylene terephthalate waste plastic materials as a modifier to asphalt mixtures. Constr. Build. Mater. 219, 81–90 (2019). https://doi.org/10.1016/j.conbuildmat.2019.05.172
Fang, C., Li, T., Zhang, Z., Jing, D.: Modification of asphalt by packaging waste-polyethylene. Polym. Compos. 29, 500–505 (2008). https://doi.org/10.1002/PC.20390
Fang, C., Zhou, S., Zhang, M., Zhao, S.: Modification of waterproofing asphalt by PVC packaging waste. J. Vinyl Addit. Technol. 15, 229–233 (2009). https://doi.org/10.1002/VNL.20204
Fang, C., Yu, R., Zhang, Y., Hu, J., Zhang, M., Mi, X.: Combined modification of asphalt with polyethylene packaging waste and organophilic montmorillonite. Polym. Test. 31, 276–281 (2012). https://doi.org/10.1016/j.polymertesting.2011.11.008
Fang, C., Wu, C., Yu, R., Zhang, Z., Zhang, M., Zhou, S.: Aging properties and mechanism of the modified asphalt by packaging waste polyethylene and waste rubber powder. Polym. Adv. Technol. 24, 51–55 (2013). https://doi.org/10.1002/pat.3048
Fang, C., Yu, R., Li, Y., Zhang, M., Hu, J., Zhang, M.: Preparation and characterization of an asphalt-modifying agent with waste packaging polyethylene and organic montmorillonite. Polym. Test. 32, 953–960 (2013). https://doi.org/10.1016/j.polymertesting.2013.04.006
Fang, C., Zhang, Y., Yu, Q., Zhou, X., Guo, D., Yu, R., Zhang, M.: Preparation, characterization and hot storage stability of asphalt modified by waste polyethylene packaging. J. Mater. Sci. Technol. 29, 434–438 (2013). https://doi.org/10.1016/j.jmst.2013.02.016
Fang, C., Zhang, M., Yu, R., Liu, X.: Effect of preparation temperature on the aging properties of waste polyethylene modified asphalt. J. Mater. Sci. Technol. 31, 320–324 (2015). https://doi.org/10.1016/j.jmst.2014.04.019
Fawcett, A.H., McNally, T., McNally, G.M., Andrews, F., Clarke, J.: Blends of bitumen with polyethylenes. Polymer 40, 6337–6349 (1999). https://doi.org/10.1016/S0032-3861(98)00779-4
Fuentes-Audén, C., Sandoval, J.A., Jerez, A., Navarro, F.J., Martínez-Boza, F.J., Partal, P., Gallegos, C.: Evaluation of thermal and mechanical properties of recycled polyethylene modified bitumen. Polym. Test. 27, 1005–1012 (2008). https://doi.org/10.1016/J.POLYMERTESTING.2008.09.006
Gama, D.A., Yan, Y., Rodrigues, J.K.G., Roque, R.: Optimizing the use of reactive terpolymer, polyphosphoric acid and high-density polyethylene to achieve asphalt binders with superior performance. Constr. Build. Mater. 169, 522–529 (2018). https://doi.org/10.1016/j.conbuildmat.2018.02.206
Garside, M.: Global plastic production 1950-2020 | Statista, Statista (2021). https://www.statista.com/statistics/282732/global-production-of-plastics-since-1950/. Accessed 30 Apr 2022
Ge, D., Yan, K., You, Z., Xu, H.: Modification mechanism of asphalt binder with waste tire rubber and recycled polyethylene. Constr. Build. Mater. 126, 66–76 (2016). https://doi.org/10.1016/j.conbuildmat.2016.09.014
Geyer, R.: Production, use, and fate of synthetic polymers. In: Plastic Waste and Recycling, pp. 13–32 (2020). https://doi.org/10.1016/B978-0-12-817880-5.00002-5
Gibreil, H.A.A., Feng, C.P.: Effects of high-density polyethylene and crumb rubber powder as modifiers on properties of hot mix asphalt. Constr. Build. Mater. 142, 101–108 (2017). https://doi.org/10.1016/j.conbuildmat.2017.03.062
González, O., Peña, J.J., Muñoz, M.E., Santamaría, A., Pérez-Lepe, A., Martínez-Boza, F., Gallegos, C.: Rheological techniques as a tool to analyze polymer-bitumen interactions: bitumen modified with polyethylene and polyethylene-based blends. Energy Fuels 16, 1256–1263 (2002). https://doi.org/10.1021/EF020049L
Habbouche, J., Hajj, E., Sebaaly, P.E., Piratheepan, M.: A critical review of high polymer-modified asphalt binders and mixtures. Int. J. Pavement Eng. 21, 686–702 (2020). https://doi.org/10.1080/10298436.2018.1503273
Haider, S., Hafeez, I., Jamal, Ullah, R.: Sustainable use of waste plastic modifiers to strengthen the adhesion properties of asphalt mixtures. Constr. Build. Mater. 235, 117496 (2020). https://doi.org/10.1016/j.conbuildmat.2019.117496
Hesp, S.A.M., Hoare, T.R., Roy, S.D.: Low-temperature fracture in reactive-ethylene-terpolymer-modified asphalt binders low-temperature fracture in reactive-ethylene-terpolymer-modified asphalt binders. Int. J. Pavement Eng. 3, 153–159 (2002). https://doi.org/10.1080/1029843021000067809
Heydari, S., Hajimohammadi, A., Haji Seyed Javadi, N., Khalili, N.: The use of plastic waste in asphalt: a critical review on asphalt mix design and Marshall properties. Constr. Build. Mater. 309, 125185 (2021). https://doi.org/10.1016/J.CONBUILDMAT.2021.125185
Hinislioglu, S., Agar, E.: Use of waste high density polyethylene as bitumen modifier in asphalt concrete mix. Mater. Lett. 58, 267–271 (2004). https://doi.org/10.1016/S0167-577X(03)00458-0
Ho, S., Church, R., Klassen, K., Law, B., MacLeod, D., Zanzotto, L.: Study of recycled polyethylene materials as asphalt modifiers. Can. J. Civ. Eng. 33, 968–981 (2006). https://doi.org/10.1139/L06-044
Horie, K., Barón, M., Fox, R.B., He, J., Hess, M., Kahovec, J., Kitayama, T., Kubisa, P., Maréchal, E., Mormann, W., Stepto, R.F.T., Tabak, D., Vohlídal, J., Wilks, E.S., Work, W.J.: Definitions of terms relating to reactions of polymers and to functional polymeric materials: (IU PAC recommendations 2003). In: Handbook of Biochemistry and Molecular Biology, 4th edn. vol. 76, pp. 877–885 (2010). https://doi.org/10.1201/b10501-98
Hossein Hamedi, G., Ghalandari Shamami, K., Mazhari Pakenari, M.: Effect of ultra-high-molecular-weight polyethylene on the performance characteristics of hot mix asphalt. Constr. Build. Mater. 258, 119729 (2020). https://doi.org/10.1016/j.conbuildmat.2020.119729
Huang, Y.: Pavement analysis and design (1993). https://trid.trb.org/view/374362. Accessed 30 Apr 2022
Jmal, H., Bahlouli, N., Wagner-Kocher, C., Leray, D., Ruch, F., Munsch, J.N., Nardin, M.: Influence of the grade on the variability of the mechanical properties of polypropylene waste. Waste Manag. 75, 160–173 (2018). https://doi.org/10.1016/J.WASMAN.2018.02.006
Kalantar, Z., Karim, M., Mahrez, A.: A review of using waste and virgin polymer in pavement. Constr. Build. Mater. 33, 56–62 (2012). https://doi.org/10.1016/j.conbuildmat.2012.01.009
Khan, I.M., Kabir, S., Alhussain, M.A., Almansoor, F.F.: Asphalt design using recycled plastic and crumb-rubber waste for sustainable pavement construction. Proc. Eng. 145, 1557–1564 (2016). https://doi.org/10.1016/j.proeng.2016.04.196
Kim, K.W., Kweon, J., Doh, Y.S., Park, T.-S.: Fracture toughness of polymer-modified asphalt concrete at low temperatures. Can. J. Civ. 30, 406–413 (2003). https://doi.org/10.1139/L02-101
Kumar, R., Saboo, N., Kumar, P., Chandra, S.: Effect of warm mix additives on creep and recovery response of conventional and polymer modified asphalt binders. Constr. Build. Mater. 138, 352–362 (2017). https://doi.org/10.1016/J.CONBUILDMAT.2017.02.019
Kumar, S., Smith, S.R., Fowler, G., Velis, C., Kumar, S.J., Arya Rena, S., Kumar, R., Cheeseman, C.: Challenges and opportunities associated with waste management in India. R. Soc. Open Sci. 4, 160764 (2017). https://doi.org/10.1098/RSOS.160764
Lebreton, L., Andrady, A.: Future scenarios of global plastic waste generation and disposal. Palgrave Commun. 5, 6 (2019). https://doi.org/10.1057/s41599-018-0212-7
Lee, H.D., Glueckert, T., Ahmed, T., Kim, Y., Baek, C., Do Hwang, S.: Laboratory evaluation and field implementation of polyethylene wax-based warm mix asphalt additive in USA. Int. J. Pavement Res. Technol. 6, 547–553 (2013). https://doi.org/10.6135/ijprt.org.tw/2013.6(5).547
Leng, Z., Padhan, R.K., Sreeram, A.: Production of a sustainable paving material through chemical recycling of waste PET into crumb rubber modified asphalt. J. Clean. Prod. 180, 682–688 (2018a). https://doi.org/10.1016/j.jclepro.2018.01.171
Leng, Z., Sreeram, A., Padhan, R.K., Tan, Z.: Value-added application of waste PET based additives in bituminous mixtures containing high percentage of reclaimed asphalt pavement (RAP). J. Clean. Prod. 196, 615–625 (2018b). https://doi.org/10.1016/j.jclepro.2018.06.119
Lesueur, D.: The colloidal structure of bitumen: consequences on the rheology and on the mechanisms of bitumen modification. Adv. Colloid Interface Sci. 145, 42–82 (2009). https://doi.org/10.1016/J.CIS.2008.08.011
Liang, Z., Woodhams, R.T., Wang, Z.N., Harbinson, B.F.: Utilization of recycled polyethylene in the preparation of stabilized, high performance modified asphalt binders. ASTM Spec. Tech. Publ., 197–209 (1993). https://doi.org/10.1520/stp19851s
Liang, M., Xin, X., Fan, W., Wang, H., Jiang, H., Zhang, J., Yao, Z.: Phase behavior and hot storage characteristics of asphalt modified with various polyethylene: experimental and numerical characterizations. Constr. Build. Mater. 203, 608–620 (2019). https://doi.org/10.1016/j.conbuildmat.2019.01.095
Liang, M., Ren, S., Sun, C., Zhang, J., Jiang, H., Yao, Z.: Extruded tire crumb-rubber recycled polyethylene melt blend as asphalt composite additive for enhancing the performance of binder. J. Mater. Civ. Eng. 32, 04019373 (2020). https://doi.org/10.1061/(asce)mt.1943-5533.0003044
Liang, M., Sun, C., Yao, Z., Jiang, H., Zhang, J., Ren, S.: Utilization of wax residue as compatibilizer for asphalt with ground tire rubber/recycled polyethylene blends. Constr. Build. Mater. 230, 116966 (2020). https://doi.org/10.1016/j.conbuildmat.2019.116966
Liang, M., Xin, X., Fan, W., Zhang, J., Jiang, H., Yao, Z.: Comparison of rheological properties and compatibility of asphalt modified with various polyethylene. Int. J. Pavement Eng. 22, 11–20 (2021). https://doi.org/10.1080/10298436.2019.1575968
Little, D.N.: Analysis of the influence of low density polyethylene modification (novophalt) of asphalt concrete on mixture shear strength and creep deformation potential. Polymer Modified University and research engineer at the Texas Transporta. ASTM, 186–202 (1992)
Little, D.N.: Enhancement of asphalt concrete mixtures to meet structural requirements through the addition of recycled polyethylene. ASTM Spec. Tech. Publ., 210–230 (1993). https://doi.org/10.1520/stp19852s
Liu, H., Zeiada, W., Al-Khateeb, G.G., Shanableh, A., Samarai, M.: Use of the multiple stress creep recovery (MSCR) test to characterize the rutting potential of asphalt binders: a literature review. Constr. Build. Mater. 269, 121320 (2021). https://doi.org/10.1016/J.CONBUILDMAT.2020.121320
Lu, X., Isacsson, U., Ekblad, J.: Phase separation of SBS polymer modified bitumens. J. Mater. Civ. Eng. 11, 51–57 (1999). https://doi.org/10.1061/(ASCE)0899-1561(1999)11:1(51)
Ma, Y., Wang, S., Zhou, H., Hu, W., Polaczyk, P., Asce, M., Huang, B.: Potential alternative to styrene–butadiene–styrene for asphalt modification using recycled rubber–plastic blends. J. Mater. Civ. Eng. 33, 04021341 (2021). https://doi.org/10.1061/(ASCE)MT.1943-5533.0003946
Ma, Y., Wang, S., Zhou, H., Hu, W., Polaczyk, P., Zhang, M., Huang, B.: Compatibility and rheological characterization of asphalt modified with recycled rubber-plastic blends. Constr. Build. Mater. 270, 121416 (2021). https://doi.org/10.1016/J.CONBUILDMAT.2020.121416
Ma, Y., Zhou, H., Jiang, X., Polaczyk, P., Xiao, R., Zhang, M., Huang, B.: The utilization of waste plastics in asphalt pavements: a review. Clean. Mater. 2, 100031 (2021). https://doi.org/10.1016/J.CLEMA.2021.100031
Ma, Y., Wang, S., Zhou, H., Hu, W., Polaczyk, P., Huang, B.: Recycled polyethylene and crumb rubber composites modified asphalt with improved aging resistance and thermal stability. J. Clean. Prod. 334, 130102 (2022). https://doi.org/10.1016/J.JCLEPRO.2021.130102
Maharaj, R., Balgobin, A., Singh-Ackbarali, D.: The influence of polyethylene on the theological properties of Trinidad lake asphalt and Trinidad petroleum bitumen. Asian J. Mater. Sci. 1, 36–44 (2009)
Maharaj, C., Maharaj, R., Maynard, J.: The effect of polyethylene terephthalate particle size and concentration on the properties of asphalt and bitumen as an additive. Prog. Rubber, Plast. Recycl. Technol. 31, 1–23 (2015). https://doi.org/10.1177/147776061503100101
Miłkowski, W.: Catalytic modification of road asphalt by polyethylene. J. Transp. Eng. 111, 54–72 (1985). https://doi.org/10.1061/(ASCE)0733-947X(1985)111:1(54)
Modarres, A., Hamedi, H.: Effect of waste plastic bottles on the stiffness and fatigue properties of modified asphalt mixes. Mater. Des. 61, 8–15 (2014a). https://doi.org/10.1016/j.matdes.2014.04.046
Modarres, A., Hamedi, H.: Developing laboratory fatigue and resilient modulus models for modified asphalt mixes with waste plastic bottles (PET). Constr. Build. Mater. 68, 259–267 (2014b). https://doi.org/10.1016/j.conbuildmat.2014.06.054
Moghadas Nejad, F., Azarhoosh, A., Hamedi, G.H.: Effect of high density polyethylene on the fatigue and rutting performance of hot mix asphalt – a laboratory study. Road Mater, Pavement Des. 15, 746–756 (2014). https://doi.org/10.1080/14680629.2013.876443
Movilla-Quesada, D., Raposeiras, A.C., Olavarría, J.: Effects of recycled polyethylene terephthalate (PET) on stiffness of hot asphalt mixtures. Adv. Civ. Eng. 2019, 6969826 (2019). https://doi.org/10.1155/2019/6969826
MS-2 asphalt mix design methods, MS-2 7th edition asphalt mix design methods. ASTM Int. i, 1–197 (2009)
Nakhaei, M., Darbandi Olia, A.D., Akbari Nasrekani, A., Asadi, P.: Rutting and moisture resistance evaluation of polyethylene wax-modified asphalt mixtures. Pet. Sci. Technol. 34, 1568–1573 (2016). https://doi.org/10.1080/10916466.2016.1212209
Nejad, F.M., Aflaki, E., Mohammadi, M.A.: Fatigue behavior of SMA and HMA mixtures. Constr. Build. Mater. 24, 1158–1165 (2010). https://doi.org/10.1016/J.CONBUILDMAT.2009.12.025
Nejres, A.M., Mustafa, Y.F., Aldewachi, H.S.: Evaluation of natural asphalt properties treated with egg shell waste and low density polyethylene. Int. J. Pavement Eng. 23, 39–45 (2022). https://doi.org/10.1080/10298436.2020.1728534
Nguyen, H.P., Cheng, P., Nguyen, T.T.: Properties of stone matrix asphalt modified with polyvinyl chloride and nano silica. Polymers 13, 2358 (2021). https://doi.org/10.3390/POLYM13142358
Osorto, M.R.R., Casagrande, M.D.T.: Environmental impact comparison analysis between a traditional hot mixed asphalt (HMA) and with the addition of recycled post-consumer polyethylene terephthalate (RPET) through the life cycle assessment (LCA) methodology. Sustainability 15, 1102 (2023). https://doi.org/10.3390/SU15021102
Othman, A.M.: Effect of low-density polyethylene on fracture toughness of asphalt concrete mixtures. J. Mater. Civ. Eng. 22, 1019–1024 (2010). https://doi.org/10.1061/(asce)mt.1943-5533.0000106
Ouyang, C., Gao, Q., Shi, Y., Shan, X.: Compatibilizer in waste tire powder and low-density polyethylene blends and the blends modified asphalt. J. Appl. Polym. Sci. 123, 485–492 (2012). https://doi.org/10.1002/APP.34634
Padhan, R.K., Sreeram, A.: Enhancement of storage stability and rheological properties of polyethylene (PE) modified asphalt using cross linking and reactive polymer based additives. Constr. Build. Mater. 188, 772–780 (2018). https://doi.org/10.1016/j.conbuildmat.2018.08.155
Pais, J.C., Amorim, S.I.R., Minhoto, M.J.C.: Impact of traffic overload on road pavement performance. J. Transp. Eng. 139, 873–879 (2013). https://doi.org/10.1061/(ASCE)TE.1943-5436.0000571
Pereira, P., Pais, J.: Main flexible pavement and mix design methods in Europe and challenges for the development of an European method. J. Traffic Transp. Eng. Engl. Ed. 4, 316–346 (2017). https://doi.org/10.1016/J.JTTE.2017.06.001
Pérez-Lepe, A., Martínez-Boza, F.J., Attané, P., Gallegos, C.: Destabilization mechanism of polyethylene-modified bitumen. J. Appl. Polym. Sci. 100, 260–267 (2006). https://doi.org/10.1002/app.23091
Polacco, G., Stastna, J., Biondi, D., Antonelli, F., Vlachovicova, Z., Zanzotto, L.: Rheology of asphalts modified with glycidylmethacrylate functionalized polymers. J. Colloid Interface Sci. 280, 366–373 (2004). https://doi.org/10.1016/J.JCIS.2004.08.043
Polacco, G., Berlincioni, S., Biondi, D., Stastna, J., Zanzotto, L.: Asphalt modification with different polyethylene-based polymers. Eur. Polym. J. 41, 2831–2844 (2005). https://doi.org/10.1016/j.eurpolymj.2005.05.034
Polacco, G., Berlincioni, S., Biondi, D., Stastna, J., Zanzotto, L.: Asphalt modification with different polyethylene-based polymers. Eur. Polym. J. 41, 2831–2844 (2005). https://doi.org/10.1016/J.EURPOLYMJ.2005.05.034
Polacco, G., Filippi, S., Merusi, F., Stastna, G.: A review of the fundamentals of polymer-modified asphalts: asphalt/polymer interactions and principles of compatibility. Adv. Colloid Interface Sci. 224, 72–112 (2015). https://doi.org/10.1016/j.cis.2015.07.010
Punith, V.S., Veeraragavan, A.: Behavior of asphalt concrete mixtures with reclaimed polyethylene as additive. J. Mater. Civ. Eng. 19, 500–507 (2007). https://doi.org/10.1061/(ASCE)0899-1561(2007)19:6(500)
Punith, V.S., Veeraragavan, A.: Evaluation of reclaimed polyethylene-modified asphalt pavements. J. Test. Eval. 38 (2010). https://doi.org/10.1520/JTE102418
Punith, V.S., Veeraragavan, A.: Behavior of reclaimed polyethylene modified asphalt cement for paving purposes. J. Mater. Civ. Eng. 23, 833–845 (2011). https://doi.org/10.1061/(asce)mt.1943-5533.0000235
Punith, V.S., Veeraragavan, A., Amirkhanian, S.N.: Evaluation of reclaimed polyethylene modified asphalt concrete mixtures. Int. J. Pavement Res. Technol. 4, 1–10 (2011)
Roberts, F.L., Kandhal, P.S., Brown, E.R., Lee, D.-Y., Kennedy, T.W.: Hot mix asphalt materials, mixture design and construction, napa Res. Educ. Found. (1996). https://trid.trb.org/view/380063. Accessed 30 Apr 2022
Roque, R., Birgisson, B., Tia, M., Kim, B., Cui, Z.: Guidelines for use of modifiers in superpave mixtures: executive summary and volume 1 of 3 volumes: evaluation of sbs modifier. TRB (2004). https://trid.trb.org/view/697983. Accessed 30 Apr 2022
Salehi, S., Arashpour, M., Kodikara, J., Guppy, R.: Comparative life cycle assessment of reprocessed plastics and commercial polymer modified asphalts. J. Clean. Prod. 337, 130464 (2022). https://doi.org/10.1016/J.JCLEPRO.2022.130464
Shang, L., Wang, S., Zhang, Y., Zhang, Y.: Pyrolyzed wax from recycled cross-linked polyethylene as warm mix asphalt (WMA) additive for SBS modified asphalt. Constr. Build. Mater. 25, 886–891 (2011). https://doi.org/10.1016/j.conbuildmat.2010.06.097
Singh, N., Hui, D., Singh, R., Ahuja, I.P.S., Feo, L., Fraternali, F.: Recycling of plastic solid waste: a state of art review and future applications. Composites, Part B, Eng. 115, 409–422 (2017). https://doi.org/10.1016/J.COMPOSITESB.2016.09.013
Soenen, H., Lu, X., Redelius, P.: The morphology of bitumen-SBS blends by UV microscopy. Road Mater, Pavement Des. 9, 97–110 (2011). https://doi.org/10.1080/14680629.2008.9690109
Soltani, M., Moghaddam, T.B., Karim, M.R., Baaj, H.: Analysis of fatigue properties of unmodified and polyethylene terephthalate modified asphalt mixtures using response surface methodology. Eng. Fail. Anal. 58, 238–248 (2015). https://doi.org/10.1016/j.engfailanal.2015.09.005
Stock, A.F., Arand, W.: Low temperature cracking in polymer modified binders. TRB (1993). https://trid.trb.org/view/501049. Accessed 30 Apr 2022
Taherkhani, H., Arshadi, M.R.: Investigating the mechanical properties of asphalt concrete containing waste polyethylene terephthalate. Road Mater, Pavement Des. 20, 381–398 (2019). https://doi.org/10.1080/14680629.2017.1395354
Valkering, C.P., Vonk, W.: Thermoplastic rubbers for the modification of bitumens: improved elastic recovery for high deformation resistance of asphalt mixes. TRB (1990). https://trid.trb.org/view/1198849. Accessed 30 Apr 2022
Vargas, M.A., Vargas, M.A., Sánchez-Sólis, A., Manero, O.: Asphalt/polyethylene blends: rheological properties, microstructure and viscosity modeling. Constr. Build. Mater. 45, 243–250 (2013). https://doi.org/10.1016/j.conbuildmat.2013.03.064
Vasudevan, R., Ramalinga Chandra Sekar, A., Sundarakannan, B., Velkennedy, R.: A technique to dispose waste plastics in an ecofriendly way – application in construction of flexible pavements. Constr. Build. Mater. 28, 311–320 (2012). https://doi.org/10.1016/J.CONBUILDMAT.2011.08.031
Wang, T., Yi, T., Yuzhen, Z.: The compatibility of SBS-modified asphalt. Pet. Sci. Technol. 28, 764–772 (2010). https://doi.org/10.1080/10916460902937026
Wang, S., Yuan, C., Jiaxi, D.: Crumb tire rubber and polyethylene mutually stabilized in asphalt by screw extrusion. J. Appl. Polym. Sci. 131, 41189 (2014). https://doi.org/10.1002/app.41189
Willis, R., Yin, F., Moraes, R.: Recycled plastics in asphalt part a: state of the knowledge. TRB (2020). https://trid.trb.org/view/1761163. Accessed 30 Apr 2022
Wu, S., Montalvo, L.: Repurposing waste plastics into cleaner asphalt pavement materials: a critical literature review. J. Clean. Prod. 280, 124355 (2021). https://doi.org/10.1016/J.JCLEPRO.2020.124355
Yan, L., Li, M., Li, Q., Li, H.: Modified asphalt based on polyethylene with broad molecular weight distribution. Constr. Build. Mater. 260, 119707 (2020). https://doi.org/10.1016/j.conbuildmat.2020.119707
Yao, L., Leng, Z., Lan, J., Chen, R., Jiang, J.: Environmental and economic assessment of collective recycling waste plastic and reclaimed asphalt pavement into pavement construction: a case study in Hong Kong. J. Clean. Prod. 336, 130405 (2022). https://doi.org/10.1016/J.JCLEPRO.2022.130405
Ye, Q., Amirkhanian, S., Li, J., Chen, Z.: Effects of waste polyethylene on the rheological properties of asphalt binder. J. Test. Eval. 48, 1893–1904 (2020). https://doi.org/10.1520/JTE20190220
Yeh, P.H., Nien, Y.H., Chen, J.H., Chen, W.C., Chen, J.S.: Thermal and rheological properties of maleated polypropylene modified asphalt. Polym. Eng. Sci. 45, 1152–1158 (2005). https://doi.org/10.1002/PEN.20386
Yengejeh, A.R., Shirazi, S.Y.B., Naderi, K., Nazari, H., Nejad, F.M.: Reducing production temperature of asphalt rubber mixtures using recycled polyethylene wax and their performance against rutting. Adv. Civ. Eng. Mater. 9, 117–127 (2020). https://doi.org/10.1520/ACEM20190130
Yildirim, Y.: Polymer modified asphalt binders. Constr. Build. Mater. 21, 66–72 (2007). https://doi.org/10.1016/J.CONBUILDMAT.2005.07.007
Yousefi, A.A.: Polyethylene dispersions in bitumen: the effects of the polymer structural parameters. J. Appl. Polym. Sci. 90, 3183–3190 (2003). https://doi.org/10.1002/APP.12942
Yu, B., Jiao, L., Ni, F., Yang, J.: Evaluation of plastic–rubber asphalt: engineering property and environmental concern. Constr. Build. Mater. 71, 416–424 (2014). https://doi.org/10.1016/J.CONBUILDMAT.2014.08.075
Yu, R., Fang, C., Liu, P., Liu, X., Li, Y.: Storage stability and rheological properties of asphalt modified with waste packaging polyethylene and organic montmorillonite. Appl. Clay Sci. 104, 1–7 (2015). https://doi.org/10.1016/j.clay.2014.11.033
Yvonne, B.M., Müller, A.J., Rodriguez, Y.: Use of rheological compatibility criteria to study SBS modified asphalts. J. Appl. Polym. Sci. 90, 1772–1782 (2003). https://doi.org/10.1002/APP.12764
Zhang, F., Hu, C.: The research for crumb rubber/waste plastic compound modified asphalt. J. Therm. Anal. Calorim. 124, 729–741 (2016). https://doi.org/10.1007/s10973-015-5198-4
Zhang, H., Wu, X., Cao, D., Zhang, Y., He, M.: Effect of linear low density-polyethylene grafted with maleic anhydride (LLDPE-g-MAH) on properties of high density-polyethylene/styrene-butadiene- styrene (HDPE/SBS) modified asphalt. Constr. Build. Mater. 47, 192–198 (2013). https://doi.org/10.1016/j.conbuildmat.2013.04.047
Zhang, D., Chen, M., Wu, S., Liu, Q., Wan, J.: Preparation of expanded graphite/polyethylene glycol composite phase change material for thermoregulation of asphalt binder. Constr. Build. Mater. 169, 513–521 (2018). https://doi.org/10.1016/j.conbuildmat.2018.02.167
Zhang, D., Chen, M., Wu, S., Riara, M., Wan, J., Li, Y.: Thermal and rheological performance of asphalt binders modified with expanded graphite/polyethylene glycol composite phase change material (EP-CPCM). Constr. Build. Mater. 194, 83–91 (2019). https://doi.org/10.1016/j.conbuildmat.2018.11.011
Zhang, J., Yao, Z., Yu, T., Liu, S., Jiang, H.: Experimental evaluation of crumb rubber and polyethylene integrated modified asphalt mixture upon related properties. Road Mater, Pavement Des. 20, 1413–1428 (2019). https://doi.org/10.1080/14680629.2018.1447505
Ziari, H., Kaliji, A.G., Babagoli, R.: Laboratory evaluation of the effect of waste plastic bottle (PET) on rutting performance of hot mix asphalt mixtures. Pet. Sci. Technol. 34, 819–823 (2016). https://doi.org/10.1080/10916466.2016.1169290
Ziari, H., Nasiri, E., Amini, A., Ferdosian, O.: The effect of EAF dust and waste PVC on moisture sensitivity, rutting resistance, and fatigue performance of asphalt binders and mixtures. Constr. Build. Mater. 203, 188–200 (2019). https://doi.org/10.1016/J.CONBUILDMAT.2019.01.101
Author information
Authors and Affiliations
Contributions
Dheeraj Mehta: Conceptualization, Writing, Data compilation, Reviewing and Editing; Nikhil Saboo.: Data Compilation, Writing; Sarah Mariam Abraham: Writing, Drawing logical inferences; Utkarsh Diwaker: Writing, Editing.
Corresponding author
Ethics declarations
Competing interests
The authors declare no competing interests.
Additional information
Publisher’s Note
Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.
Rights and permissions
Springer Nature or its licensor (e.g. a society or other partner) holds exclusive rights to this article under a publishing agreement with the author(s) or other rightsholder(s); author self-archiving of the accepted manuscript version of this article is solely governed by the terms of such publishing agreement and applicable law.
About this article
Cite this article
Mehta, D., Saboo, N., Abraham, S.M. et al. A review on the use of waste plastics in hot mix asphalt. Mech Time-Depend Mater (2023). https://doi.org/10.1007/s11043-023-09622-y
Received:
Accepted:
Published:
DOI: https://doi.org/10.1007/s11043-023-09622-y