Special features of structural and phase transformations during the formation of bainitic steel structure were studied. The possibilities of identifying plate (PM) and lath (LM) martensite after quenching, and of tempered martensite (TM) along with upper (UB) and lower (LB) bainite after tempering of quenched steel are described. The morphology and specifics of the formation of UB, LB, and TM in the steel structure were studied. The x-ray phase analysis method was used to show the possibility of identifying phases (PM, LM, residual austenite (Ares), TM, UP and LB) and calculating their mass fractions in steel by decomposing the reflections into components. Quenching at 950°C was shown to produce PM and LM in steel with different morphologies and dislocation densities, contents of twins and carbon concentrations in the matrix. Tempering of the quenched steel at 500°C was shown to cause the following phase transition: PM + LM + Ares → UB + LB + TM + PM+ LM+ cementite. The resistance of bainitic steel to sulfide corrosion cracking underloading and to hydrogen embrittlement was assessed.
Similar content being viewed by others
References
R. W. Revie, Oil and Gas Pipelines: Integrity and Safety Handbook, Wiley (2015).
A. Dinita and S. Kolisnychenko, Tube Products and Pipeline Systems, Trans. Tech. Publications (2021).
C. Garcia-Mateo, Bainite and Martensite: Developments and Challenges, MDPI: AG (2020).
V. D. Sitdikov, M. Yu. Murashkin, and R. Z. Valiev, “Full-scale use of x-ray scattering techniques to characterize aged Al – 2 wt.% Cu alloy,” J. All. Comp., 735, 1792 – 1798 (2018).
M. Leoni, T. Confente, and P. Scardi, “PM2K: a flexible program implementing Whole Powder Pattern Modelling,” Z. Kristallogr. Suppl., 23, 249 – 254 (2006).
S. Zajac, V. Schwinn, and K. H. Tacke, “Characterization and quantification of complex bainitic microstructures in high and ultra-high strength linepipe steels,” Mater. Sci. Forum, 500 – 501, 387 – 394 (2005).
L. Qian, Z. Li, T. Wang, et al., “Roles of pre-formed martensite inbelow-Ms bainite formation, microstructure, strain partitioning and impact absorption energies of low-carbon bainitic steel,” J. Mater. Sci. Tech., 96, 69 – 84 (2022).
S. H. Talebi, H. Ghasemi-Nanesa, M. Jahazi, and H. Melkonyan, “In situ study of phase transformations during non-isothermal tempering of bainitic and martensitic microstructures,” Metals, 7, 346 (2017).
R. Z. Valiev, R. K. Islamgaliev, and I. V. Alexandrov, “Bulk nanostructured materials from severe plastic deformation,” Prog. Mater. Sci., 45, 103 – 189 (2000).
G. V. Kurdjumov, “Martensite with abnormal crystal lattice,” J. Less-Comm. Metals., 28, 153 – 155 (1972).
J. A. Castañeda, O. A. Zambrano, G. A. Alcázar, et al., “Stacking fault energy determination in Fe – Mn – Al – C austenitic steels by x-ray diffraction,” Metals, 11, 701 (2021).
D. H. Sastry, M. J. Luton, and J. J. Jonas, “Stacking fault probabilities in BCC Zr – Mo alloys,” Phil. Mag., 30(5), 1187 – 1190 (1974).
D. V. Edmonds and E. Pereloma, Phase Transformations in Steels, Elsevier Science, Great Britain (2012).
X.-B. Shi, W. Yan, W. Wang, et al., “IC and SSC behavior of high-strength pipeline steels,” Acta Metall. Sin.-Engl. Lett., 28, 799 – 808 (2015).
D. H. Shim, T. Lee, J. Lee, et al., “Increased resistance to hydrogen embrittlement in high-strength steels composed of granular bainite,” Mater. Sci. Eng. A., 700, 473 – 480 (2017).
The authors express their gratitude to “NK Rosneft’” PJSC and “RN-BashNIPIneft’” LLC for providing the opportunity to conduct research and publish the article, as well as to the senior expert, Dr. A. I. Voloshin (“RN-BashNIPIneft’” LLC), for discussing the obtained results and making valuable remarks.
Author information
Authors and Affiliations
Corresponding author
Additional information
Translated from Metallovedenie i Termicheskaya Obrabotka Metallov, No. 5, pp. 3 – 9, May, 2023.
Rights and permissions
Springer Nature or its licensor (e.g. a society or other partner) holds exclusive rights to this article under a publishing agreement with the author(s) or other rightsholder(s); author self-archiving of the accepted manuscript version of this article is solely governed by the terms of such publishing agreement and applicable law.
About this article
Cite this article
Malinin, A.V., Sitdikov, V.D. & Kurilov, A.A. Special Features of Structural and Phase Transformations in Bainitic Steel. Met Sci Heat Treat 65, 265–271 (2023). https://doi.org/10.1007/s11041-023-00924-z
Received:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s11041-023-00924-z