The effect of thermocycling treatment on the susceptibility to local corrosion and mechanical characteristics of corrosion-resistant steel 12Kh18N10T in different states (after austenitizing, cold rolling, and neutron irradiation) is considered. The possibility of partial recovery of the corrosion and mechanical characteristics of irradiated reactor steel due to low-cycle thermocycling in a temperature range exceeding the irradiation temperature is demonstrated.
![](http://media.springernature.com/m312/springer-static/image/art%3A10.1007%2Fs11041-017-0170-5/MediaObjects/11041_2017_170_Fig1_HTML.gif)
![](http://media.springernature.com/m312/springer-static/image/art%3A10.1007%2Fs11041-017-0170-5/MediaObjects/11041_2017_170_Fig2_HTML.gif)
![](http://media.springernature.com/m312/springer-static/image/art%3A10.1007%2Fs11041-017-0170-5/MediaObjects/11041_2017_170_Fig3_HTML.gif)
![](http://media.springernature.com/m312/springer-static/image/art%3A10.1007%2Fs11041-017-0170-5/MediaObjects/11041_2017_170_Fig4_HTML.gif)
![](http://media.springernature.com/m312/springer-static/image/art%3A10.1007%2Fs11041-017-0170-5/MediaObjects/11041_2017_170_Fig5_HTML.gif)
![](http://media.springernature.com/m312/springer-static/image/art%3A10.1007%2Fs11041-017-0170-5/MediaObjects/11041_2017_170_Fig6_HTML.gif)
Similar content being viewed by others
References
V. S. Biront and G. G. Krushenko, “Effect of heat and thermocycling treatment on the structure and properties of maraging steel,” Inzh. Delo, Tekhnologii (J. Siberian Branch of the Federal University), No. 3, 247 – 255 (2008).
L. A. Belyaeva, G. A. Malygin, and V. V. Rybin, “Mechanism of recovery of mechanical properties of neutron-irradiated metals under thermocycling,” Fiz. Tverd. Tela, 48(3), 443 – 449 (2006).
N. N. Davidenkov and V. A. Likhachev, Irreversible Change of Metal Shape under Cyclic Thermal Impact [in Russian], Mashgiz, Leningrad (1962), 223 p.
N. A. Zharkova, Laws of Radiation and Thermal Fatigue Fracture of Metals, Author’s Abstract of Doctoral’s Thesis [in Russian], Moscow (2001), 169 p.
V. K. Fedyukin and M. S. Smagorinskii, Thermocycling Treatment of Metals and Machine Parts [in Russian], Mashinostroenie, Leningrad (1989), 255 p.
A. P. Petkova, “Special features of plastic deformation of irradiated austenitic corrosion-resistant steels in the 20... 450°C temperature range,” VANT, Ser. Fiz. Radiats. Povrezhd. Radiats. Materialoved., No. 3(83), 83 – 89 (2003).
V. S. Neustroev, Z. E. Ostrovsky, and V. K. Shamardin, “Effect of stress on irradiation-induced swelling and vacancy void formation in neutron-irradiated austenitic steels,” Phys. Met. Metallogr., 86(1), 79 – 85 (1998).
V. S. Neustroev, V. K. Shamardin, Z. E. Ostrovsky, A. M. Pecherin, and F. A. Garner, “Temperature-shift of void swelling observed at PWR-relevant temperatures in annealed Fe – 18Cr – 10Ni – Ti stainless steel irradiated at high and low dpa rates in BOR-60,” in: Int. Symp. “Contribution of Materials Investigation to the Resolution of Problems Encountered in Pressurized Water Reactors,” 14 – 18 Sept. 1988, Fontevraud, France.
N. D. Tomashov and G. P. Chernova, The Theory of Corrosion and Corrosion-Resistant Structural Alloys [in Russian], Metallurgiya, Moscow (1986), 359 p.
O. P. Maksimkin, A. V. Yarovchuk, K. V. Tsay, and S. V. Ruban, “Pitting corrosion of cold-deformed stainless steel 12Kh18N10T,” Vestn. Nats. Yader. Tsentra Resp. Kazakhstan, Issue 1, 38 – 45 (2014).
O. P. Maksimkin, A. V. Yarovchuk, K. V. Tsay, and S. V. Ruban, “Localized corrosion in neutron-irradiated and deformed at subzero temperatures 12Cr18Ni10Ti stainless steel,” in: Abs. VII Eurasia Conf. on Nuclear Science and its Applications, 21 – 24 Oct. 2014, Baku, Azerbaijan.
A. M. Parshin and A. N. Tikhonov, Corrosion of Metals in Nuclear Power Machine Engineering [in Russian], Politekhnika, St. Petersburg (1994), 93 p.
V. V. Gerasimov, “Corrosion cracking of steels at heat power plants,” in: Corrosion of Reactor Materials [in Russian], Moscow (1960).
V. S. Neustroev and V. K. Shamardin, “About the relation between microstructure and fracture behavior of steel Kh18N10T irradiated with neutrons to 70 dpa,” Atomn. Energ., 71(4), 345 – 348 (1991).
A. V. Yarovchuk, T. A. Doronina, and O. V. Tivanova, “Effect of strain martensite on the resistance of stainless steel 12Kh18N10T to pitting corrosion,” Polzunovskii Al’manakh, Nos. 1 – 2, 190 – 196 (2007).
E. A. Savchenkov and R. P. Aitkulov, “Corrosion properties of steel with cellular polygonal substructure,” Vestn. OGU, No. 9, 179 – 183 (2005).
Yu. G. Chudalkin, A. V. Kozlov, and M. V. Evseev, “Evolution of magnetic properties of cladding austenitic steel under irradiation in a reactor,” Phys. Met. Metallogr., 115(3), 248 – 256 (2014).
K. V. Tsay, O. P. Maksimkin, L. G. Turubarova, et al., “Microstructural defect evolution in neutron-irradiated 12Cr18Ni9Ti stainless steel during subsequent isochronous annealing,” J. Nucl. Mater., 148 – 158 (2013).
O. P. Maksimkin and B. K. Rakhashev, “Reverse martensitic α → γ transformation in steel 12Kh18N10T irradiated to 56 dpa in VN-350 reactor,” Vestn. Nats. Yader. Tsentra Resp. Kazakhstan, No. 3, 161 – 165 (2009).
The work has been performed with financial support of MON RK within Grant No. 0334/GF4 of the Scientific Foundation.
Author information
Authors and Affiliations
Corresponding author
Additional information
Translated from Metallovedenie i Termicheskaya Obrabotka Metallov, No. 7, pp. 49 – 56, July, 2017.
Rights and permissions
About this article
Cite this article
Yarovchuk, A.V., Maksimkin, O.P. & Tsay, K.V. Effect of Low-Cycle Thermocycling Treatment on Corrosion and Mechanical Properties of Corrosion-Resistant Steel 12Kh18N10T Irradiated with Neutrons. Met Sci Heat Treat 59, 446–453 (2017). https://doi.org/10.1007/s11041-017-0170-5
Published:
Issue Date:
DOI: https://doi.org/10.1007/s11041-017-0170-5