Results are given for a study of the mechanical properties of aluminum alloy AA2219 after thermomechanical treatment by different regimes, including different (in form and degree) cold plastic deformation.
Similar content being viewed by others
Notes
Here and subsequently through the text the first figure is the degree of reduction with cold rolling and the second figure is the degree of stretching deformation.
References
R. P. Reed, P. T. Simon, N. J. McColskey, et al., “Aluminum alloys for ALS cryogenic tanks: Comparative measurements of cryogenic mechanical properties of Al – Li alloys and alloy 2219,” in: Philips Laboratory, TR-91-3073, CA, USA (1991).
J. Sessler and V. Weiss, “Aluminum alloy 221,” in: Materials Data Handbook, CR-74554, NASA, USA (1966).
Elwin L. Rooy, “Introduction to aluminium and aluminium alloys,” in: Properties and Selection Nonferrous Alloys and Special Purpose Materials. Metals Handbook, The Materials Information Society, ASM International, USA (1990), Vol. 2, pp. 3 – 14.
“Aluminum and aluminum alloys,” in: J. R. Davis (ed.), ASM Specialty Handbook, ASM International, Materials Park Ohio, USA (1994), pp. 290 – 315.
Jae-Ho Jang, Dae-Geun Nam, Yong-Ho Park, and Ik-Min Park, “Effect of solution treatment and artificial ageing on microstructure and mechanical properties of Al – Cu alloy,” Trans. Nonferrous Met. Soc. China, 23, 631 – 635 (2013).
An Li-hui, Cai Yang, LiuWei, et al., Trans. Nonferrous Met. Soc. China, 22, 370 – 375 (2012).
Min Song, Yuehui He, Daihong Xiao, and Baiyun Huang, Mater. Design, 30, 857 – 861 (2009).
Ning Ai-Lin, Liu Zhi-Yi, and Zeng Su-Min, Trans. Nonferrous Met. Soc. China, 16, 1341 – 1347 (2006).
The authors thank the Director of Vikram Sarabhai Space Centre for permission to publish the work.
Author information
Authors and Affiliations
Corresponding author
Additional information
Translated from Metallovedenie i Termicheskaya Obrabotka Metallov, No. 6, pp. 41 – 44, June, 2015.
Rights and permissions
About this article
Cite this article
Gupta, R.K., Panda, R., Mukhopadhyay, A.K. et al. Study of Aluminum Alloy AA2219 After Heat Treatment. Met Sci Heat Treat 57, 350–353 (2015). https://doi.org/10.1007/s11041-015-9888-0
Published:
Issue Date:
DOI: https://doi.org/10.1007/s11041-015-9888-0