The effect of carbide phase on the process of wear of steel 110Kh18M is considered. The laws of variation of wear are determined as a function of the quantitative factors of the hardening phase. The content and arrangement of carbides in the structure of the steel providing minimum wear are determined.
Similar content being viewed by others
References
V. A. Zrelov, V. V. Makarchuk, M. E. Prodanov, and A. A. Sudarev, “Analysis of the conditions of operation of bearings in rests of rotors of aircraft GE and PP,” Vestn. Samarsk. Gos. Aerokosm. Univ. Im. Akad. S. P. Koroleva, No. 3-2, 326 – 332 (2012).
A. G. Spektor, B. P. Zel’bet, and S. A. Kiseleva, Structure and Properties of Bearing Steels [in Russian], Metallurgiya, Moscow (1980), 264 p.
TU 14-1-3045–80. Bars from Corrosion-Resistant Steel. Grade 11Kh18M-ShD by Double Remelting (Electroslag + Vacuum Arc). Performance Specifications [in Russian].
V. S. Litvin, E. A. Ostrovskaya, and S. I. Shipunova, “Effect of the condition of carbide phase in steel 11Kh18M on the wear resistance of ball races of instrument bearings,” in: Proc. of the VNIPP [in Russian], Spetsinformtsentr VNIPP, Moscow (1978), No. 3(97), pp. 43 – 52.
Author information
Authors and Affiliations
Corresponding author
Additional information
Translated from Metallovedenie i Termicheskaya Obrabotka Metallov, No. 7, pp. 54 – 56, July, 2014.
Rights and permissions
About this article
Cite this article
Moroz, A.N., Glotka, A.A. Effect of Carbide Component on the Service Characteristics of Steel 110Kh18M. Met Sci Heat Treat 56, 394–396 (2014). https://doi.org/10.1007/s11041-014-9768-z
Published:
Issue Date:
DOI: https://doi.org/10.1007/s11041-014-9768-z