Skip to main content
SpringerLink
Log in

Intelligent Information-Measurement System for Measuring the Parameters of Oxide Coatings in the Process of Microarc Oxidation

  • ELECTROMAGNETIC MEASUREMENTS
  • Published:
Measurement Techniques Aims and scope

Questions of raising the efficiency and controllability of the process of depositing protective microarc oxide coatings with specified properties on products made of light metals and alloys (aluminum, magnesium, titanium) are examined. An intelligent information-measurement system is developed for measuring the parameters of microarc oxide coatings which contains unique hardware, program, and information support. For the hardware support of the system a technological current source is created that specifies the technical regimes, strength and shape of the current (a sinusoidal or pulsed signal is possible) which to a great extent determines the parameters of the formed coatings. Original circuit solutions in the area of pulsed power electronics, along with modern electronic components, are used for developing the source. The technological current source has a high efficiency and provides a complete range of regulation of the parameters of the energy effect on a test sample where a coating is being formed. The developed intelligent informationmeasurement system is intended for high current measurements of the process parameters and properties of the resulting coatings; it can be used for automatic monitoring of microarc oxidation, as well as for scientific studies. Intelligent application and the knowledge bank of the system ensure intelligent choice of the optimum technological parameters of microarc processing, along with automatically controlled synthesis of microarc oxide coatings with specified properties.

This is a preview of subscription content, log in via an institution to check access.

Access this article

Log in via an institution

Price excludes VAT (USA)
Tax calculation will be finalised during checkout.

Instant access to the full article PDF.

Institutional subscriptions

Fig. 1
Fig. 2
Fig. 3
Fig. 4
Fig. 5
Fig. 6

Similar content being viewed by others

References

  1. A. Shirani, T. Joy, A. Rogov, et al., Surf. Coat. Technol., 397, Article ID 126016 (2020), https://doi.org/10.1016/j.surfcoat.2020.126016.

  2. C. Yang, H. Cai, S. Cui, et al., Surf. Coat. Technol., 433, Article ID 128148 (2022), https://doi.org/10.1016/j.surfcoat.2022.128148.

  3. A. Fattah-alhosseini, R. Chaharmahali, K. Babaei, M. Nouri, M. K. Keshavarz, and M. Kaseem, J. Magnesium Alloys, 10, 2354–2383 (2022), https://doi.org/https://doi.org/10.1016/j.jma.2022.09.002.

    Article  Google Scholar 

  4. A. Fattah-alhosseini, M. Molae, M. Nouri, and K. Babaei, J. Magnesium Alloys, 10, 81–96 (2022), https://doi.org/https://doi.org/10.1016/j.jma.2021.05.020.

    Article  Google Scholar 

  5. A. Zolotarjov, K. Smit, K. Laganovska, et al., Radiat. Meas., 124, 29–34 (2019), https://doi.org/https://doi.org/10.1016/j.radmeas.2019.02.020.

    Article  Google Scholar 

  6. H. Wu, J. Jiang, and E. I. Meletis, Appl. Surf. Sci. 506, Article ID 144858 (2020), https://doi.org/10.1016/j.apsusc.2019.144858.

  7. M. Kaseem, T. Zehra, B. Dikici, A. Dafali, H. W. Yang, and Y. G. Ko, J. Magnesium Alloys, 10, 1311–1325 (2022), https://doi.org/https://doi.org/10.1016/j.jma.2021.08.028.

    Article  Google Scholar 

  8. A. Jangde, S. Kumar, and C. Blawert, J. Magnesium Alloys, 8, 692–715 (2020), https://doi.org/https://doi.org/10.1016/j.jma.2020.05.002.

    Article  Google Scholar 

  9. X. Wang and F. Zhang, Trans. Nonferrous Metals Soc. China, 32, No. 7, 2243–2252 (2022), https://doi.org/https://doi.org/10.1016/S1003-6326(22)65944-2.

    Article  Google Scholar 

  10. M. A. Pechenkina and D. L. Rakov, Computer-Aided Design Mech. Eng., No. 6, 120–122 (2018), https://elibrary.ru/ytrqjn.

  11. A. V. Kozlov, Increasing the Wear Resistance of Parts in Microarc Oxide Machines, Cand. Dis. Tech. Sci., Orel (2014), https://elibrary.ru/svavnb.

  12. A. M. Volkhin, Tribotechnical Characterisitics of Composite Porous MAO Coatings Impregnated from above with High-Molecular Polyethylene, Cand. Dis. Tech. Sci., Moscow (2013), https://elibrary.ru/qxzkzx

  13. I. S. Ponomarev, Enhancement of Mechanical and Special Properties of Welding Seams of Aluminum Alloys by Microplasma Oxidation, Extended Abstract of Cand. Dis. Tech. Sci., Yekaterinburg (2016), https://elibrary.ru/zqbgjr.

  14. A. V. Bolshenko A. V. Pavlenko, V. S. Puzin, and I. N. Panenko, Power Supplies for Microarc Oxidation Devices, Life Sci. J., 11, No. 1s, 263–268 (2014), https://www.elibrary.ru/uzqplr.

  15. A. I. Mamaev, V. A. Mamaeva V. N. Borikov, and T. I. Dorofeeva, Formation of Nanostructured Nonmetallic Inorganic Coatings by Localization of High-Energy Flows at the Phase Interface, Tomsk, Publ. House Tomsk University (2010), 360 p.

  16. V. N. Borikov, Methods and Means of Measuring the Electrical Parameters of the Coating Formation Process During Pulsed Energy Interaction in Solutions, Extended Abstract of Doctor. Dis. Tech. Sci. TPU, Tomsk (2012), https://www.elibrary.ru/qhzjqv.

  17. E. V. Parfenov, R. G. FarrakhovV. R. Mukaeva, et al., Automated Technical Apparatus for Studying Electrolyte-Plasma Processes, Bull. Ufa State Aviation Tech. Univ., 20, 4(74), 23–31 (2016), https://www.elibrary.ru/xhniux.

  18. E. V. Parfenov and A. Yerokhin, Methodology of data Acquisition and Signal Processing for Frequency Response Evaluation During Plasma Electrolytic Surface Treatments, Process Control: Problems, Techniques and Applications, Nova Sci. Publ., Inc. (2012), Ch. 3, pp. 63–96.

  19. A. R. Fatkullin and E. V. Parfenov, Automation of the Technical Process for Plasma-Electrolytic Oxidation Based on Indirect Monitoring of the Thickness of a Coating from its Electrical Characteristics, Bull. Ufa State Aviation Tech. Univ., 20, 4(74), 38–44 (2016), https://www.elibrary.ru/xhnivr.

  20. A. B. Rogov, Y. Huang, D. Shore, A. Matthews, and A. Yerokhin, Ceram. Int., 47, No. 24, 34137–34158 (2021), https://doi.org/https://doi.org/10.1016/j.ceramint.2021.08.324.

    Article  Google Scholar 

  21. P. Golubkov, E. Pecherskaya, O. Karpanin, M. Safronov, T. Zinchenko, and D. Artamonov, 26th Conf. Open Innovations Association (FRUCT), Yaroslavl, Russia, April 23–24, 2020, Helsinki, Finland, IEEE, 2020, pp. 91–101, https://doi.org/10.23919/FRUCT48808.2020.9087360.

  22. P. E. Golubkov, E. A. Pecherskaya, O. V. Karpanin, O. A. Mel'nikov, A. V. Pecherskiy, and O. A. Timokhina, J. Phys. Conf. Ser., 1889, No. 52041, 1–5 (2021), https://doi.org/https://doi.org/10.1088/1742-6596/1889/5/052041.

    Article  Google Scholar 

  23. P. E. Golubkov, A. V. Martynov, and E. A. Pecherskaya, Collection of Articles from the VI All-Russian Interuniversity Sci. and Practical Conf. Information Technologies in Science and Education. Problems and Prospects (VMNPK-2018), Penza, Russia, March 14, 2018, Penza, PSU Publ. House, pp. 245–248 (2018), https://www.elibrary.ru/xvrkeh.

Download references

Acknowledgment

This work was supported by the Ministry of Science and Higher Education of the Russian Federation, project 1022041100284-5-2.3.1.

Conflict of interest. The authors declare no conflict of interest.

Author information

Authors and Affiliations

  1. Penza State University, Penza, Russia

    E. A. Pecherskaya, P. E. Golubkov, M. D. Novichkov, S. A. Gurin & A. M. Metal’nikov

Authors
  1. E. A. Pecherskaya
    View author publications

    You can also search for this author in PubMed Google Scholar

  2. P. E. Golubkov
    View author publications

    You can also search for this author in PubMed Google Scholar

  3. M. D. Novichkov
    View author publications

    You can also search for this author in PubMed Google Scholar

  4. S. A. Gurin
    View author publications

    You can also search for this author in PubMed Google Scholar

  5. A. M. Metal’nikov
    View author publications

    You can also search for this author in PubMed Google Scholar

Corresponding author

Correspondence to E. A. Pecherskaya.

Additional information

Translated from Izmeritel'naya Tekhnika, No. 6, pp. 46–55, June, 2023. DOI: https://doi.org/10.32446/0368-1025it.2023-6-46-55

Rights and permissions

Springer Nature or its licensor (e.g. a society or other partner) holds exclusive rights to this article under a publishing agreement with the author(s) or other rightsholder(s); author self-archiving of the accepted manuscript version of this article is solely governed by the terms of such publishing agreement and applicable law.

Reprints and permissions

About this article

Check for updates. Verify currency and authenticity via CrossMark

Cite this article

Pecherskaya, E.A., Golubkov, P.E., Novichkov, M.D. et al. Intelligent Information-Measurement System for Measuring the Parameters of Oxide Coatings in the Process of Microarc Oxidation. Meas Tech 66, 420–429 (2023). https://doi.org/10.1007/s11018-023-02243-4

Download citation

  • Received:

  • Accepted:

  • Published:

  • Issue Date:

  • DOI: https://doi.org/10.1007/s11018-023-02243-4

Keywords

Search

Navigation