We perform the comparative and statistical analyses of the discharge coefficients of critical nozzles with toroidal branch pipes and discuss the main approaches aimed at the evaluation of the discharge coefficients. We present the equations for the dependences used to describe the behavior of the discharge coefficients of critical nozzles as functions of the Reynolds number. By using an example of critical Venturi nozzles, we study the factors affecting the accuracy of measurements of the gas flow rate.
Similar content being viewed by others
References
A. P. Gerasimov, V. P. Ivanov, V. M. Krasavin, et al., “The area of application of Laval nozzles in flow-rate measurement technique,” Izmer. Tekhn., No. 4, 48–52 (2005).
A. P. Gerasimov, V. P. Ivanov, V. M. Krasavin, et al., “Properties of gas flows,” Izmer. Tekhn., No. 4, 40–44 (2005).
MI 1538–86, GSI. Critical Flowmeters. Methods of Measurements of Mass Gas Flow Rates.
ISO 9300:2005 (E), Measurement of Gas Flow by Means of Critical Flow Venturi Nozzles.
C. Wang, H. Ding, and Y. Zhao, “Influence of wall roughness on discharge coefficient of sonic nozzles,” Flow Meas. Instrum., 35, 55–62 (2014).
B. T. Arnberg, “Review of critical flowmeters for gas flow measurements,” J. Basic Eng., No. 12, 447–457 (1962).
B. S. Stratford, “The calculation of the discharge coefficient of profiled choked nozzles and optimum profile for absolute air flow measurement,” J. Royal Aeron. Soc., 68, 237–245 (1964).
B. T. Arnberg, C. L. Britton, and W. F. Seidl, “Discharge coefficient correlations for circular Venturi flow meters at critical (sonic) flow,” J. Fluids Eng., No. 2, 111–123 (1974).
M. Ishibashi and M. Takamoto, “Theoretical discharge coefficient of a critical circular-arc nozzle with laminar boundary layer and its verification by measurements using super-accurate nozzles,” Flow Meas. Instrum., 11, 305–313 (2000).
K. A. Park, “Effects of inlet shapes of critical Venturi nozzles on discharge coefficients. Flomeko,” in: Proc. 10th IMEKO TC9 Conf. on Flow Measurement (2000), pp. 15–19.
J. A. Cruz-Maya, F. Sanchez-Silva, and P. Quinto-Diez, “A new correlation to determine the discharge coefficient of a critical Venturi nozzle with turbulent boundary layer,” Flow Meas. Instrum., 17, 258–266 (2006).
Y. M. Choi, K. M. Park, and S. O. Park, “Interference effect between sonic nozzles,” Flow Meas. Instrum., 8, 113–119 (1997).
M. Ishibashi, “Discharge coefficient equation for critical-flow toroidal-throat Venturi nozzles covering the boundary-layer transition regime,” Flow Meas. Instrum., 44, 107–121 (2015).
C. H. Li, X. F. Peng, and C. Wang, “Influence of diffuser angle on discharge coefficient of sonic nozzles for flow-rate measurements,” Flow Meas. Instrum., 21, 531–537 (2010).
H. Ding, C. Wang, and Y. Zhao, “Surface roughness effect on flow measurement of real gas in a critical nozzle,” Measurement, 68, 82–91 (2015).
N. Bignell and Y. M. Choi, “Thermal effects in small sonic nozzles,” Flow Meas. Instrum., 13, 17–22 (2002).
D. G. Steward, J. T. R. Watson, and A. M. Vaidya, “Improved critical flow factors and representative equations for four calibration gases,” Flow Meas. Instrum., 10, 27–41 (1999).
Author information
Authors and Affiliations
Corresponding author
Additional information
Translated from Izmeritel’naya Tekhnika, No. 7, pp. 51–54, July, 2018.
Rights and permissions
About this article
Cite this article
Dayev, Z.А., Sultanov, N.Z. Comparative Analysis of the Discharge Coefficients of Critical Nozzles. Meas Tech 61, 718–722 (2018). https://doi.org/10.1007/s11018-018-1490-6
Received:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s11018-018-1490-6