Kinetics of austenite grain growth within a heat-affected zone is studied for low carbon low-alloy steels of different alloying composition. The effect of Ti/N ratio on the metal impact strength of the heat-affected zone is demonstrated.
Similar content being viewed by others
References
Yu. D. Morozov and l. I. Éfron, “Steel for pipes of main pipelines: state and tendency of development,” Metallurg, No. 5, 53–57 (2006).
N. V. Varlamov, G. I. Makarov, and G. A. Giller, “Contemporary scientific trends in the field of development and use of pipes of a new generation for main gas pipelines,” Territoriya Neftegaz, No. 9, 62–69 (2011).
L. I. Éfron, Materials Science in Big metallurgy. Pipe Steels [in Russian], Metallurgizdat, Moscow (2012).
S. Yu. Nastich, M. Yu. Matrosov, T. S. Kireeva, and A. V. Nazarov, “Effect of features of the microstructure around a pipe welded joint zone of steels Kh70–100 on ductility ad nature of metal failure,” Nauka Tekhnika Gaz. Prom., No. 4 (62), 47–55 (2015).
A. S. Smolentsev, “Ways of resolving problems of weldability of high-strength steels inclined towards hardening (Review),” Svarka Diagnostika, No. 3, 48–53 (2019).
L. A. Efimenko, D. V. Ponomarenko, I. Yu. Utkin, and R. O. Ramus’, “Study of the effect of a tendency towards austenite grain growth on HAZ welded joint impact strength for low-carbon low-alloy steels,” Metallurg, No. 4, 62–65 (2020).
Yu. I. Matrosov, D. A. Litvinenko, and S. A. Golovanenko, Steels for main Pipelines [in Russian], Metallurgiya, Moscow (1989).
K. G. Vorkachev, P. P. Stepanov, L. I. Éfron, M. M. Kantor, A. V. Chastukhin, and S. V. Zharkov, “Effect of microstructure on welded joint ductility of high-strength low-alloy steels with simulation of a coarse grained region of the heat-affected zone,” Metallurg, No. 9, 26–33 (2020).
L. A. Efimenko, A. A. Ramus’, and A. O. Merkulova, “Features of austenite decomposition in the heat-affected zone of a high-strength steel weld,” FMM, 116, No. 5, 520 (2015)
W. W. Xu, Q. F. Wang. T. Pan, H. Su, and C. F. Yang, “Effect of welding heat input on simulated HAZ microstructure toughness of a V–N microalloyed steel,” Proc. of Sino-Swedish Structural Materials Symposium (2007), pp. 234–239.
Author information
Authors and Affiliations
Corresponding author
Additional information
Translated from Metallurg, Vol. 65, No. 8, pp. 43–48, August, 2021. Russian DOI: 10.52351/00260827_2021_08_43.
Rights and permissions
About this article
Cite this article
Efimenko, L.A., Ponomarenko, D.V. & Utkin, I.Y. Effect of Ti/N Ratio on Impact Strength of High Strength Pipe Steel Welded Joint Heat-Affected Zone. Metallurgist 65, 856–863 (2021). https://doi.org/10.1007/s11015-021-01223-9
Received:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s11015-021-01223-9