Abstract
The closed-form solutions of a piezoelectric exponentially graded fiber-reinforced hollow cylinder in hygrothermal environment conditions are investigated. The interaction of electric displacement and electric potentials as well as the elastic deformations is discussed. The present piezoelectric fiber-reinforced circular cylinder is subjected to a mechanical load as well as an electric potential at its lateral surfaces. The resultant constitutive equations of the piezoelectric fiber-reinforced composite cylinder are analytically investigated. The thermal conductivity and the moisture diffusivity coefficient are supposed to change continuously in the radial direction by a simple exponential law. The hygrothermoelastic responses of piezoelectric exponentially graded fiber-reinforced hollow circular cylinders are presented. The significant of influence of the graduation of material, temperature, moisture, pressures and electric parameters is investigated. Concluding remarks and appropriate discussions are presented.
Similar content being viewed by others
References
Abramowitz, M., Stegun, I.: Handbook of Mathematical Functions. Dover Publications Inc, New York (1965)
Alashti, R.A., Khorsand, M.: Three-dimensional thermo-elastic analysis of a functionally graded cylindrical shell with piezoelectric layers by differential quadrature method. Int. J. Press. Vessel. Pip. 88(5–7), 167–180 (2011). doi:10.1016/j.ijpvp.2011.06.001
Allam, M.N.M., Tantawy, R., Zenkour, A.M.: Semi-empirical and efficient solutions for FGPM hollow spheres in hygrothermal environment. KSCE J. Civil Eng. 20(5), 1958–1965 (2016). doi:10.1007/s12205-015-0057-1
Allam, M.N.M., Zenkour, A.M., Tantawy, R.: Analysis of functionally graded piezoelectric cylinders in a hygrothermal environment. Advan. Appl. Math. Mech. 6(2), 233–246 (2014). doi:10.4208/aamm.12-m1277
Arefi, M.: Nonlinear thermoelastic analysis of thick-walled functionally graded piezoelectric cylinder. Acta Mech. 224(11), 2771–2783 (2013). doi:10.1007/s00707-013-0888-0
Atrian, A., Jafari Fesharaki, J., Nourbakhsh, S.H.: Thermo-electromechanical behavior of functionally graded piezoelectric hollow cylinder under non-axisymmetric loads. Appl. Math. Mech. -Engl. Ed. 35(7), 939–954 (2015). doi:10.1007/s10483-015-1959-9
Ballas, R.G.: Piezoelectric Multilayer Beam Bending Actuators. Springer, Berlin (2007)
Chen, C.Q., Shen, Y.P., Liang, X.: Three dimensional analysis of piezoelectric circular cylindrical shell of finite length. Acta Mech. 134(3), 235–249 (1999). doi:10.1007/BF01312657
Dai, H.-L., Jiang, H.-J.: Analytical study for electromagnetothermoelastic behavior of a functionally graded piezoelectric solid cylinder. Mech. Advan. Mater. Struct. 20(10), 811–818 (2013). doi:10.1080/15376494.2012.676715
Dai, H.-L., Wang, X.: Magneto–thermo–electro–elastic transient response in a piezoelectric hollow cylinder subjected to complex loadings. Int. J. Solids Struct. 43(18–19), 5628–5646 (2006). doi:10.1016/j.ijsolstr.2005.06.092
Dai, H.-L., Dai, T., Zheng, H.-Y.: Stresses distributions in a rotating functionally graded piezoelectric hollow cylinder. Meccanica 47(47), 423–436 (2012). doi:10.1007/s11012-011-9447-8
Dai, H.-L., Hong, L., Fu, Y.-M., Xiao, X.: Analytical solution for electromagnetothermoelastic behaviors of a functionally graded piezoelectric hollow cylinder. Appl. Math. Model. 34(2), 343–357 (2010). doi:10.1016/j.apm.2009.04.008
Dai, H.-L., Wang, X., Dai, Q.H.: Thermoelectroelastic responses in orthotropic piezoelectric hollow cylinders subjected to thermal shock and electric excitation. J Reinforc Plast Compos 24(10), 1085–1103 (2005). doi:10.1177/0731684405048834
Ding, H.J., Wang, H.M., Chen, W.Q.: Analytical solution of a special non-homogeneous pyroelectric hollow cylinder for piezothermoelastic axisymmetric plane strain dynamic problems. Appl. Math. Comput. 151(2), 423–441 (2004). doi:10.1016/S0096-3003(03)00352-7
Fesharaki, J.J., Fesharaki, V.J., Yazdipoor, M., Razavian, B.: Two-dimensional solution for electro-mechanical behavior of functionally graded piezoelectric hollow cylinder. Appl. Math. Model. 36(11), 5521–5533 (2012). doi:10.1016/j.apm.2012.01.019
Ghorbanpour Arani, A., Abdollahian, M.Khoddami, Maraghi, Z.: Thermo-elastic analysis of a non-axisymmetrically heated FGPM hollow cylinder under multi-physical fields. Int. J. Mech. Mater. Des. 11(2), 157–171 (2015). doi:10.1007/s10999-014-9263-0
Ghorbanpour Arani, A., Haghshenas, A., Amir, S., Mozdianfard, M.R., Latifi, M.: Electro-thermo-mechanical response of thick-walled piezoelectric cylinder reinforced by boron-nitride nanotubes. Strength Mater. 45(1), 102–115 (2013). doi:10.1007/s11223-013-9437-2
Heyliger, P.: A note on the static behavior of simply supported laminated piezoelectric cylinders. Int. J. Solids Struct. 34(29), 3781–3794 (1997). doi:10.1016/S0020-7683(97)00009-7
Jones, R.M.: Mechanics of Composite Materials, 2nd edn. Taylor and Francis, Philadelphia (1999)
Khoshgoftar, M.J., Ghorbanpour Arani, A., Arefi, M.: Thermoelastic analysis of a thick walled cylinder made of functionally graded piezoelectric material. Smart Mater. Struct. 18(11), 115007 (2009). doi:10.1088/0964-1726/18/11/115007
Kumar, A., Chakraborty, D.: Effective properties of thermo-electro-mechanically coupled piezoelectric fiber reinforced composites. Mater. Des. 30(4), 1216–1222 (2009). doi:10.1016/j.matdes.2008.06.009
Mallik, M., Ray, M.C.: Effective coefficients of piezoelectric fiber-reinforced composites. AIAA J. 41(4), 704–710 (2003). doi:10.2514/2.2001
Rahimi, G.H., Arefi, M., Khoshgoftar, M.J.: Application and analysis of functionally graded piezoelectrical rotating cylinder as mechanical sensor subjected to pressure and thermal loads. Appl. Math. Mech. -Engl. Ed. 32(8), 997–1008 (2011). doi:10.1007/s10483-011-1475-6
Ramirez, F., Heyliger, P.R., Pan, E.: Free vibration response of two-dimensional magneto-electro-elastic laminated plates. J. Sound Vib. 292(3–5), 626–644 (2006). doi:10.1016/j.jsv.2005.08.004
Ray, M.C., Batra, R.C.: Effective properties of carbon nanotube and piezoelectric fiber reinforced hybrid smart composites. ASME J. Appl. Mech. 76(3), 034503 (2009). doi:10.1115/1.3063633
Saadatfar, M., Razavi, A.S.: Piezoelectric hollow cylinder with thermal gradient. J. Mech. Sci. Technol. 23(1), 45–53 (2009). doi:10.1007/s12206-008-1002-8
Shen, H.S.: A comparison of post-buckling behavior for FGM cylindrical shells with piezoelectric fiber reinforced composite actuators. J. Eng. Mater. Technol. 131(3): 031010-1–11 (2009). doi:10.1115/1.3120408
Tong, Z.H., Lo, S.H., Jiang, C.P., Cheung, Y.K.: An exact solution for the three-phase thermoelectro-magneto-elastic cylinder model and its application to piezoelectric-magnetic fiber composites. Int. J. Solids Struct. 45(20), 5205–5219 (2008). doi:10.1016/j.ijsolstr.2008.04.003
Wu, C.-P., Tsai, T.-C.: Exact solutions of functionally graded piezoelectric material sandwich cylinders by a modified Pagano method. Appl. Math. Model. 36(5), 1910–1930 (2012). doi:10.1016/j.apm.2011.07.077
Wu, X.H., Shen, Y.P., Chen, C.S.: An exact solution for functionally graded piezo-thermoelastic cylindrical shell as sensors or actuators. Mater. Lett. 57(22–23), 3532–3542 (2003). doi:10.1016/S0167-577X(03)00121-6
Wu, C.-P., Syu, Y.-S., Lo, J.-Y.: Three-dimensional solutions of multilayered piezoelectric hollow cylinders by an asymptotic approach. Int. J. Mech. Sci. 49(6), 669–689 (2007). doi:10.1016/j.ijmecsci.2006.11.002
Ying, C., Zhifei, S.: Double-layered piezo-thermoelastic hollow cylinder under some coupled loadings. Arch. Appl. Mech. 75(6), 326–337 (2006). doi:10.1007/s00419-005-0418-1
Zenkour, A.M.: Piezoelectric behavior of an inhomogeneous hollow cylinder with thermal gradient. Int. J. Thermophys. 33(7), 1288–1301 (2012). doi:10.1007/s10765-012-1248-3
Zenkour, A.M.: Exact solution of thermal stress problem of an inhomogeneous hygrothermal piezoelectric hollow cylinder. Appl. Math. Model. 38(24), 6133–6143 (2014a). doi:10.1016/j.apm.2014.05.028
Zenkour, A.M.: Hygrothermoelastic responses of inhomogeneous piezoelectric and exponentially graded cylinders. Int. J. Press. Vessel Pip. 119, 8–18 (2014b). doi:10.1016/j.ijpvp.2014.02.001
Acknowledgments
This work was funded by the Deanship of Scientific Research (DSR), King Abdulaziz University, Jeddah, under Grand No. (130–805–D1435). The author, therefore, acknowledge with thanks DSR technical and financial support.
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Zenkour, A.M. Bending analysis of piezoelectric exponentially graded fiber-reinforced composite cylinders in hygrothermal environments. Int J Mech Mater Des 13, 515–529 (2017). https://doi.org/10.1007/s10999-016-9351-4
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s10999-016-9351-4