Abstract
In this work, flexible silica (SiO2) aerogels were prepared, using Methyltriethoxysilane (MTES) and Dimethyldiethoxysilane (DMDES) as co-precursor, via two-step acid/base catalyzed sol–gel process and the following ambient pressure drying (APD) process, without using any surfactant. The molar ratio of MTES/DMDES and the concentration of the central silicon, influenced not only on the morphology and physical performance of the final samples, but also on the specific mechanism of the sol–gel chemistry. The results of FTIR, XPS, SEM images, stress-strain curves, etc for the final samples would illustrated these influence. And moreover, based on the similarity between the sol–gel process of siloxanes precursors and the network step polymerization of organic monomers, some basic concepts and theories in organic polymerization, such as the average functionality and Carothers equation, were adopted to discuss the reactive mode of MTES/DMDES co-precursor. Therefore, this work might be helpful for future research into functionally diverse, robust silica aerogels.
Graphical Abstract
Highlights
-
The MTES/DMDES hybrid silica aerogels were prepared without using any surfactant.
-
A two-step acid/base catalyzed sol–gel process was applied to control the phase separation of MTES/DMDES co-precursor in polar solvent Ethanol.
-
Some basic concepts and theories in organic polymerization, such as the average functionality and Carothers equation, were adopted to discuss the reactive mode of MTES/DMDES co-precursor.
-
The MTES/DMDES hybrid silica aerogels endured ambient pressure drying process, and still displayed favourable mechanical property.
Similar content being viewed by others
References
Li C, Zhang G, Lin L, Wu T, Brunner S, Galmarini S, Bi J, Malfait WJ, Zhao S, Ostrikov K (2023) Silica aerogels: from materials research to industrial applications. Int Mater Rev 68:2167547
Çok SS, Gizli N (2022) Microstructural properties and heat transfer characteristics of in-situ modified silica aerogels prepared with different organosilanes. Int J Heat Mass Tran 188:122618
Alattar AM (2021) Spectral and structural investigation of silica aerogels properties synthesized through several techniques. J Non-Cryst Solids 571:121048
Sonu SS, Nisha R, Indu C (2023) Multifunctional aerogels: a comprehensive review on types, synthesis and application of aerogels. J sol–gel Sci Technol 105:324–336
Meti P, Wang Q, Gong Y, Mahadik DB, Park H (2022) Sorbitol cross-linked silica aerogels with improved textural and mechanical properties. Ceram Int 48:19198–19205
Fashandi M, Karamikamkar S, Leung SN, Naguib HE, Hong J, Liang B, Park CB (2022) Synthesis, structures and properties of hydrophobic Alkyltrimethoxysilane-Polyvinyltrimethoxysilane hybrid aerogels with different alkyl chain lengths. J Colloid Inter Sci 608:702–734
Karamikamkar S, Naguib HE, Park CB (2020) Advances in precursor system for silica-based aerogel production toward improved mechanical properties, customized morphology, and multifunctionality: A review. Adv Colloid Inter Sci 276:102101
Zu G, Kanamori K, Maeno A, Kaji H, Nakanishi K (2018) Superflexible multifuntional polyvinypolydimethylsiloxane-based aerogels as efficient absorbents, thermal superinsulators, and strain sensors. Angew Chem 130:9870–9875
Hung W, Horng RS, Shia R (2021) Investigation of thermal insulation performance of glass/carbon fiber-reinforced silica aerogel composites. J sol–gel Sci Technol 97:414–421
Wang F, Si Y, Yu J, Ding B (2021) Tailoring Nanonets-engineered superflexible nanofibrous aerogels with hierarchical cage-like architecture enables renewable antimicrobial air filtration. Adv Funct Mater 31:2107223
Lamy-Mendes A, Malfait WJ, Sadeghpour A, Girão AV, Silva RF, Durães L (2021) Influence of 1D and 2D carbon nanostructures in silica-based aerogels. Carbon 180:146–162
Estaji S, Paydaesh A, Mousavi SR, Khonakdar HA, Abiyati MM, Khonakdar HA, Abiyati MM (2021) Polycarbonate/poly(methyl methacrylate)/silica aerogel blend composites for advanced transparent thermal insulations: mechanical, thermal, and optical studies. Polym Compos 42:5323–5334
Abdusalamov R, Scherdel C, Itskov M, Milow B, Reichenauer G, Rege A (2021) Modeling and Simulation of the Aggregation and the Structural and Mechanical Properties of Silica Aerogels. J Phys Chem B 125:1944–1950
Bhuiyan MAR, Wang L, Shanks RA, Ara ZA, Saha T (2020) Electrospun polyacrylonitrile-silica aerogel coating on viscose nonwoven fabric for versatile protection and thermal comfort. Cellulose 27:10501–10517
Xing F, Ou Z, Gao X, Chen B, Wang ZL (2022) Harvesting electrical energy from high temperature environment by aerogel nano-covered triboelectric yarns. Adv Funct Mater 32:2205275
Ślosarczyk A (2021) Carbon fiber-silica aerogel composite with enhanced structural and mechanical properties based on water glass and ambient pressure drying. Nanomaterials 11:258
Linhares T, Amorim MTP, Durães L (2019) Silica aerogel composites with embedded fibers: a review on their preparation, properties and applications. J Mater Chem A 7:22768–22802
Teng S, Xie W, Zhang D, Yang J, Quan B, Lu X (2023) Ultra-broadband electromagnetic wave absorbent: in-situ generated silica modified conductive carbon fiber aerogels. Ceram Int 49:24744–24751
Odziomek M, Chaput F, Dujardin C, Lerouge F, Cassette P, Sitarz M, Parola S (2018) Design and application of high optical quality YAG: Ce Nanocrystal-loaded silica aerogels. ACS Appl Mater Inter 10:32304–32312
Lermontov SA, Sipyagina NA, Malkova AN, Baranchikov AE, Ivanov VK (2017) Chiral lactate-modified silica aerogels. Micropor Mesopor Mat 237:127–131
Du M, Mao N, Russell SJ (2016) Control of porous structure in flexible silicone aerogels produced from methyltrimethoxysilane (MTMS): the effect of precursor concentration in sol–gel solutions. J Mater Sci 51:719–731
Yun S, Guo T, Zhang J, He L, Li Y, Li H, Zhu X, Gao Y (2017) Facile synthesis of large-sized monolithic methyltrimethoxysilane-based silica aerogel via ambient pressure drying. J sol–gel Sci Technol 83:53–63
Shao Z, He X, Cheng X, Zhang Y (2017) A simple facile preparation of Methyltriethoxysilane based flexible silica aerogel monoliths. Mater Lett 204:93–96
Sharma J, Shukla S, Behera BK (2023) Fast production of silica aerogel using methyltrimethoxysilane by ambient drying process for superior chemical adsorption properties. J Porous Mater 30:1663–1673
Yao C, Dong X, Gao G, Sha F, Xu D (2021) Microstructure and adsorption properties of MTMS/TEOS co-precursor silica aerogels dried at ambient pressure. J Non-Cryst Solids 562:120778
Loy DA, Baugher BM, Baugher CR, Schneider DA, Rahimian K (2000) Substituent effects on the sol–gel chemistry of organotrialkoxysilanes. Chem Mater 12:3624–3632
Stevens MP (1999) Polymer Chemistry: An Introduction. Oxford University Press, New York
Song X, Zhang J (2020) Controlled gel research: the effect of ethanol for delaying the polycondensation of tetraethyl orthosilicate-dimethyldiethoxysilane. Colloid Polym Sci 298:9–20
Randall JP, Meador MAB, Jana SC (2013) Polymer reinforced silica aerogels: effects of dimethyldiethoxysilane and bis(trimethoxysilylpropyl)amine as silane precursors. J Mater Chem A 1:6642–6652
Hayase G, Kanomori K, Nakanishi K (2011) New flexible aerogels and xerogels derived from methyltrimethoxysilane/dimethyldimethoxysilane co-precursors. J Mater Chem 21:17077–17079
Zhang Y, Wang J, Zhang X (2018) Surfactant-free synthesis of silica aerogel microspheres with hierarchically porous structure. J Colloid Inter Sci 515:1–9
Kanamori K, Nakanishi K (2011) Controlled pore formation in organotrialkoxysilane-derived hybrids: from aerogels to hierarchically porous monoliths. Chem Soc Rev 40:754–770
Zu G, Kanamori K, Wang X, Nakanishi K, Shen J (2020) Superelastic triple-network polyorganosiloxane-based aerogels as transparent thermal superinsulators and efficient separators. Chem Mater 32:1595–1604
Berardi U, Naldi M (2017) The impact of the temperature dependent thermal conductivity of insulating materials on the effective building envelope performance. Energy Build 144:262–275
Mosanenzadeh SG, Alshrah M, Saadatnia Z, Park CB, Naguib HE (2020) Double dianhydride backbone polyimide aerogels with enhanced thermal insulation for high-temperature applications. Macromol Mater Eng 305:1900777
Acknowledgements
This work was supported by the Key Research Funds of Anhui Province (No. KJ2021A0875), the Natural Science Foundation of China (No. 62205004), and the Foundation of National College Students Innovation and Entrepreneurship (No. 202110879034) and the Foundation of Anhui Province College Students Innovation and Entrepreneurship (No. S202010879150).
Author contributions
All authours contributed to the data collection and analysis. YZ wrote the main manuscript text, and all author reviewed the manuscript.
Author information
Authors and Affiliations
Corresponding authors
Ethics declarations
Conflict of interest
The authors declare no competing interests.
Additional information
Publisher’s note Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.
Supplementary Information
Rights and permissions
Springer Nature or its licensor (e.g. a society or other partner) holds exclusive rights to this article under a publishing agreement with the author(s) or other rightsholder(s); author self-archiving of the accepted manuscript version of this article is solely governed by the terms of such publishing agreement and applicable law.
About this article
Cite this article
Zhang, Y., Yan, Y., Jiang, Y. et al. Flexible APD silica aerogels derived from Methyltriethoxysilane and Dimethyldiethoxysilane via surfactant-free sol–gel process. J Sol-Gel Sci Technol 109, 461–470 (2024). https://doi.org/10.1007/s10971-023-06294-5
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s10971-023-06294-5