We consider the problem of bending of an anisotropic plate of constant thickness with rigid inclusions. The algorithm of its solution is constructed on the basis of reduction of the problem of bending of a multiply connected anisotropic plate with inclusions to the evaluation of the Lekhnitskii potentials for an auxiliary plane problem of the theory of elasticity with properly chosen elastic constants. To solve this auxiliary problem, we use the method of singular integral equations in the complex form. We consider the problems of bending for plates with inclusions subjected either to the action of moments at infinity (for infinitely large plates) or to transverse loading (for finite plates). We also present some examples of evaluation of stresses acting in the plates containing rigid inclusions of different shapes or systems of inclusions of this kind.
Similar content being viewed by others
References
P. K. Banerjee and R. Butterfield, Boundary-Element Methods in Engineering Sciences, McGraw-Hill, New York (1981).
A. S. Kosmodamianskii, Stress State of Anisotropic Media with Holes or Cavities [in Russian], Vyshcha Shkola, Kiev (1976).
V. A. Lyubchak and L. A. Fil’shtinskii, “Bending of a semiinfinite anisotropic plate weakened by curvilinear cuts,” Prikl. Mekh., 18, No. 10, 63–67 (1982).
T. L. Martynovych and I. O. Nishchenko, “One method for the solution of the problem of bending of anisotropic plates,” Visn. Lviv Univ., Ser. Mekh. Math., Issue 5, 54–58 (1971).
G. N. Savin, Stress Concentration Near Holes [in Russian], Gostekhizdat, Moscow (1951).
S. P. Timoshenko, Course of the Theory of Elasticity, McGraw-Hill, New York (1970).
Z. Q. Cheng and J. N. Reddy, “Octet formalism for Kirchhoff anisotropic plates,” Proc. Roy. Soc. London, Ser. A: Math. Phys. Eng. Sci., 458, No. 2022, 1499–1517 (2002).
M. C. Hsieh and C. Hwu, “Anisotropic elastic plates with holes/cracks inclusions subjected to out-of-plane bending moments,” Int. J. Solids Stuct., 39(19), 4905–4925 (2002).
S. G. Lekhnitskii, Anisotropic Plates, Gordon & Breach, New York (1987).
O. Maksymovych and O. Illiushyn, “Stress calculation and optimization in composite plates with holes based on the modified integral equation method,” Eng. Anal. Bound. Elem., 83, 180–187 (2017).
O. Maksymovych and J. Jaroszewicz, “Determination of stress state of anisotropic plates with rigid inclusions based on singular integral equations,” Eng. Anal. Bound. Elem., 95, 215–221 (2018).
N. A. Scholar, “Anisotropic analysis using boundary elements,” Comput. Mech. Publ., 20, 142–180 (1994).
Author information
Authors and Affiliations
Corresponding author
Additional information
Translated from Matematychni Metody ta Fizyko-Mekhanichni Polya, Vol. 61, No. 3, pp. 12911–121, July–September, 2018.
Rights and permissions
About this article
Cite this article
Maksymovych, О.V., Solyar, Т.Y. & Kempa, Y. Investigation of Bending of Anisotropic Plates with Inclusions with the Help of Singular Integral Equations. J Math Sci 254, 129–141 (2021). https://doi.org/10.1007/s10958-021-05293-7
Received:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s10958-021-05293-7