Abstract
Structured mesoporous materials were successfully synthetized using an ion exchange column as protons source. Operating conditions were set in order to obtain mesostructured materials using short operation times. This method opens the door to the industrial synthesis of this kind of materials. The ordered mesoporous materials were obtained using sodium silicate solution as a precursor and poly(ethylene oxide)-poly(propylene oxide)-poly(ethylene oxide) (EO19PO39EO19 denoted as P84) was used as structure-directing agent. The influence of the composition variables (surfactant and precursor concentrations) was studied. The materials were characterized by TEM, SAXS and nitrogen adsorption–desorption isotherms to determine their specific surface area. A response surface was obtained, showing that in the studied range the ratio sodium silicate:water was the most significant parameter in order to obtain the materials with a well-structured pore arrangement. The use of sodium silicate solution as silica source instead of TEOS or TMOS, and the possibility of obtaining a material through an ion exchange column are important from the application point of view because of the relatively cheap raw materials and equipments. Presented results indicate that for every precursor:water:surfactant system an optimum experimental operating conditions must be selected once the reactants flow rate has been set.
Similar content being viewed by others
References
W.J. Koros, Y.H. Ma, T. Shimidzu, Terminology for membranes and membrane processes. J. Membr. Sci. 120, 149 (1996)
C.T. Kresge, M.E. Leonowicz, W.J. Roth, J.S. Beck, Ordered mesoporous molecular sieves synthetized by a liquid–crystal template mechanism. Nature 359, 710 (1992)
S. Beck, J.C. Vartuli, W.J. Roth, M.E. Leonowicz, C.T. Kresge, K.D. Schmitt, C.T.W. Chu, D.H. Olson, E.W. Sheppard, S.B. McCulle, J.B. Higgins, J.L. Schlender, A new family of mesoporous molecular sieves prepared with liquid crystal templates. J. Am. Chem. Soc. 114, 10834–10843 (1992)
D. Zhao, J. Feng, Q. Huo, N. Melosh, G.H. Fredrickson, B.F. Chmelka, G.D. Stucky, Triblock copolymer syntheses of mesoporous silica with periodic 50 to 300 angstrom pores. Science 279, 548–552 (1998)
Y. Wan, D. Zhao, On the controllable soft templating approach to mesoporous silicates. Chem. Rev. 107, 2821–2856 (2007)
V. Meynen, P. Cool, E.F. Vansant, Verified syntheses of mesoporous materials. Microporous Mesoporous Mater. 125, 170–223 (2009)
D. Pan, L. Tan, K. Qian, L. Zhou, Y. Fan, C. Yu, X. Bao, Synthesis of highly ordered and hydrothermally stable mesoporous materials using sodium silicate as a 381 precursor. Mater. Lett. 64, 543–1545 (2010)
J. Kim, G.D. Stucky, Synthesis of highly ordered mesoporous silica materials using sodium silicate and amphiphilic block copolymers. Chem. Commun. 13, 1159–1160 (2000)
E. Santamaría, M. Cortés, A. Maestro, M. Porras, J.M. Gutiérrez, C. González, Micro-meso and macroporous materials obtained from highly concentrated emulsion of decane/brij 35/water and decane/brij 700/water. Chem. Lett. 41, 1041–1043 (2012)
J. Shah, S. Kim, T.J. Pinnavaia, A versatile pathway for the direct assembly of organo-functional mesostructures from sodium silicate. Chem. Commun. 5, 572–573 (2004)
E. Santamaría, A. Maestro, M. Porras, J.M. Gutiérrez, C. González, A novel approach to the industrial preparation of mesostructured silica: use of ion exchange resin and study of the effect of composition variables. Chem. Eng. J. 226, 7–12 (2013)
P.T. Tanev, T.J. Pinnavaia, Mesoporous silica molecular sieves prepared by ionic and neutral surfactant templating: a comparison of physical properties. Chem. Mater. 8, 2068–2079 (1996)
T.R. Pauly, T.J. Pinnavaia, Pore size modification of mesoporous hms molecular sieve silicas with wormhole framework structures. Chem. Mater. 13, 987–993 (2001)
Q.S. Hue, D.I. Margolese, U. Ciesla, P.Y. Feng, T.E. Gier, P. Sieger, R. Leon, P.M. Petroff, F. Schuth, G.D. Stucky, Generalized synthesis of periodic surfactant/inorganic composite materials. Nature 368, 317–321 (1994)
A.S. Michaels, Simplified method of interpreting kinetic data in fixed-bed ion excange. Ind. Eng. Chem. 44, 1922–1930 (1952)
V.N. Romannikov, M.S. Melgunov, A.N. Shmakov, M.E. Malyshev, A.N. Vodennikov, V.B. Fenelonov, Physicochemical features of formation of silicate porous mesophases. Russ. Chem. Bull. 57, 29–35 (2008). International Edition
M. Kruk, M. Jaroniec, Characterization of the Porous structure of SBA-15. Chem. Mater. 12, 1961–1968 (2000)
E. Santamaría, A. Maestro, M. Porras, J.M. Gutiérrez, C. González, Controlled release of ibuprofen by meso–macroporous silica. J. Solid State Chem. 210, 242–250 (2014)
E. Santamaría, A. Maestro, M. Porras, J.M. Gutiérrez, C. González, Preparation of structured meso–macroporous silica materials: influence of composition variables on material characteristics. J. Porous Mater. 21, 263–274 (2014)
F. Michaux, M.J. Stébe, J.L. Blin, Systematic investigation of the synthesis parameters driving the preparation of mesoporous materials using nonionic fluorinated surfactant. Microporous Mesoporous Mater. 151, 201–210 (2012)
Acknowledgments
This study would not have been possible without the financial support from the Spanish Ministry of Science and Innovation (MICINN) within the framework of the project CTQ2011-29336-C03-02.
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Santamaría, E., Méndez, C., Maestro, A. et al. Ion exchange columns for the synthesis of ordered mesoporous materials. J Porous Mater 24, 267–274 (2017). https://doi.org/10.1007/s10934-016-0260-6
Published:
Issue Date:
DOI: https://doi.org/10.1007/s10934-016-0260-6