An analytical dependence of the change in the soldering temperature on the material, thickness of the soldering rod protective coating, and the time of soldering is obtained. The relation derived allows one to ensure the needed temperature of contact soldering of electronic and electrical-engineering components and, consequently, their high quality.
Similar content being viewed by others
References
V. N. Shtennikov and V. D. Seleznev, Optimization of the required temperature of contact soldering of electronic devices, J. Eng. Phys. Thermophys., 86, No. 5, 1060–1065 (2013); doi: 10.1007/s10891-013-0928-6.
V. N. Shtennikov and V. D. Seleznev, Quality improvement of bulk soldering of microwave devices, in: Proc. 23rd Int. Crimean Conf. Microwave Telecommun. Techn., 786–787 (2013).
V. N. Shtennikov and B. T. Budai, The reliability of soldered joints produced at a low temperature, Russ. J. Nondestruct. Test., 49, No. 9, 548–551 (2013); doi: 10.1134/S1061830913090088.
V. N. Shtennikov and B. T. Budai, Modern technologies of soldering, providing increased strength and ductility of metal joints, Metallofiz. Noveish. Tekhnol., 35, No. 12, 1725–1731 (2013).
G. Manco, Soldering and Solders [Russian translation], Mashinostroenie, Moscow (1968).
V. N. Shtennikov, Improvement of international standards for contact soldering in electronics, Weld. Intern., 27, No. 5, 384–386 (2013).
A. I. Pekhovich and V. M. Zhidkikh, Calculations of the Thermal Regime of Solid Bodies [in Russian], Énergiya, Leningrad (1968).
Author information
Authors and Affiliations
Corresponding author
Additional information
Translated from Inzhenerno-Fizicheskii Zhurnal, Vol. 88, No. 1, pp. 145–147, January–February, 2015.
Rights and permissions
About this article
Cite this article
Shtennikov, V.N. Thermophysical Characteristics of the Protective Coating of the Soldering Rod. J Eng Phys Thermophy 88, 146–148 (2015). https://doi.org/10.1007/s10891-015-1176-8
Received:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s10891-015-1176-8