Abstract
This study investigates the critical role of calcination temperature in determining the microstructural and magnetic properties of NiCuZn ferrites, with a specific emphasis on improving their DC-bias superposition characteristics. Our findings show that higher calcination temperatures cause an increase in sintered density and grain size, as well as the formation of a Cu-rich segregated phase at grain boundaries. Notably, ferrites calcined at 950 °C exhibited superior DC-bias superposition properties, which were attributed to the presence of a nonmagnetic copper-rich phase that modulates magnetic properties. NiCuZn ferrites with enhanced DC-bias superposition characteristics exhibit a more stable incremental permeability under a DC-bias magnetic field, which is essential for maintaining inductance at high currents. These findings highlight the critical role of calcination temperature in optimizing the magnetic performance of NiCuZn ferrites, providing useful insights for the development of advanced materials for high-frequency power.
Similar content being viewed by others
Data availability
The data presented in this study are available in the article.
References
H.I. Hsiang, Progress in materials and processes of multilayer power inductors. J. Mater. Sci. 31, 16089–16110 (2020)
M.C. Annamalai, P.N. Amutha, A comprehensive review on isolated and non-isolated converter configuration and fast charging technology: for battery and plug in hybrid electric vehicle. Heliyon. 9, e18808 (2023)
J.M. Maza-Ortega, E. Acha, S. Garcia, A. Gomez-Exposito, Overview of power electronics technology and applications in power generation transmission and distribution. J. Mod. Power Syst. Clean Energy 5, 499–514 (2017)
T. Aoki, J. Imaoka, M. Yamamoto, K. Yoshimoto, Improving DC superimposition characteristics of powder cores by applying coupled inductors in multi-phase boost converter. IET Power Electron. 15, 237–250 (2022)
J. Imaoka, K. Okamoto, Y. Ishikura, M. Shoyama, M. Noah, M. Yamamoto, Modeling, magnetic design, simulation methods, and experimental evaluation of various powder cores used in power converters considering their DC superimposition characteristics. IEEE Trans. Power Electron. 34, 9033–9051 (2019)
K. Kabeya, S. Yanase, Y. Okazaki, K. Yun, Magnetic property of iron-dust cores with mixture of ferromagnetic ferrite powder and alumina powder. IEEE Trans. Magn. 50, 1–4 (2014)
J. Mühlethaler, J. Biela, J.W. Kolar, A. Ecklebe, Core losses under the DC bias condition based on Steinmetz parameters. IEEE Trans. Power Electron. 27, 953–963 (2012)
A. Shrivastava, B.H. Calhoun, A DC-DC converter efficiency model for system level analysis in ultra low power applications. J. Low Power Electron. Appl. 3, 215–232 (2013)
M.W. Beraki, J.P.F. Trovão, M.S. Perdigão, M.R. Dubois, Variable inductor based bidirectional DC–DC converter for electric vehicles. IEEE Trans. Veh. Technol. 66, 8764–8772 (2017)
K. Górecki, K. Detka, Influence of power losses in the inductor core on characteristics of selected DC–DC converters. Energies 2019, 12 (1991)
C.A. Baguley, B. Carsten, U.K. Madawala, IEEE Trans. Magn. 44, 246–252 (2008)
B.N. Sanusi, Z. Ouyang, Magnetic core losses under square-wave excitation and DC bias in high frequency regime, in 2022 IEEE Applied Power Electronics Conference and Exposition (APEC). Houston, TX, USA (2022), pp. 633–639
B.N. Sanusi, M. Zambach, C. Frandsen, M. Beleggia, J.A. Michael, Z. Ouyang, Investigation and modeling of DC bias impact on core losses at high frequency. IEEE Trans. Power Electro. 38, 7444–7458 (2023)
T. Tsutaoka, K.T. Teruhiro, K. Hatakeyama, Magnetic field effect on the complex permeability for a Mn–Zn ferrite and its composite materials. J. Eur. Ceram. Soc. 19, 1531–1535 (1999)
H. Oshima, Y. Uehara, K. Shimizu, K. Inagaki, A. Furuya, J. Fujisaki, M. Suzuki, K. Kawano, T. Mifune, T. Matsuo, K. Watanabe, H. Igarashi, Experimental and simulation modeling studies of magnetic properties of Ni-Zn ferrite cores under DC bias. J. Jpn. Soc. Powder Powder Metall. 61, S238–S241 (2014)
H.I. Hsiang, J.F. Chueh, Low-pressure-assisted constrained sintering of low-temperature-fire NiCuZn ferrites. Int. J. Appl. Ceram. Technol. 12, E194–E201 (2015)
T. Rabe, H. Naghib-Zadeh, C. Glitzky, J. Töpfer, Integration of Ni-Cu-Zn ferrite in low temperature co-fired ceramics (LTCC) modules. Int. J. Appl. Ceram. Soc. 9, 18–28 (2012)
J. Mürbe, J. Töpfer, Low temperature sintering of sub-stoichiometric Ni-Cu-Zn ferrites: shrinkage, microstructure and permeability. J. Magn. Magn. Mater. 324, 578–583 (2012)
R.E. El-Shater, H.E. Shimy, S.A. Saafan, M.A. Darwish, D. Zhou, A.V. Trukhanov, S.V. Trukhanov, F. Fakhry, Synthesis, characterization, and magnetic properties of Mn nanoferrites. J. Alloys Compd. 928, 166954 (2022)
M. Hassan, Y. Slimani, M.A. Gondal, M.J.S. Mohamed, S. Güner, M.A. Almessiere, A.M. Surrati, A. Baykal, S. Trukhanov, A. Trukhanov, Structural parameters, energy states and magnetic properties of the novel Se-doped NiFe2O4 ferrites as highly efficient electrocatalysts for HER. Ceram. Int. 48, 24866–24876 (2022)
A. Manohar, G.R. Reddy, M.R. Hatshan, J.P. Goud, K.H. Kim, Structural and magnetic properties of Ca0.5Mg0.5Fe2O4/CeO2/NiFe2O4 nanocomposite for energy storage applications. Ceram. Int. 49, 35392–35398 (2023)
A. Manohar, S.V.P. Vattikuti, P. Manivasagan, E.S. Jang, H.T.M. Abdelghani, K.H. Kim, Synthesis and characterization of CeO2/MgFe2O4 nanocomposites for electrochemical study and their cytotoxicity in normal human dermal fibroblast (HDF) and human breast cancer (MDA-MB-231) cell lines. J. Alloys Compd. 968, 171932 (2023)
A. Manohar, V. Vijayakanth, P. Manivasagan, E.S. Jang, B. Hari, M. Gu, K.H. Kim, Investigation on the physico-chemical properties, hyperthermia and cytotoxicity study of magnesium doped manganese ferrite nanoparticles. Mater. Chem. Phys. 287, 126295 (2022)
A. Manohar, V. Vijayakanth, V. Vinodhini, K. Chintagumpala, P. Manivasagan, E.S. Jang, K.H. Kim, Zinc- doped nickel ferrite nanoparticles for ESR, hyperhtermia and thier cytotoxicity in mouse muscle fibroblast (BLO-11) and human breast cancer (MDA-MB-231) cell lines. J. Alloys Compd. 960, 170780 (2023)
Almessiere M.A.; Slimani Y.; Güngüneş H.; Korkmaz A.D.; Zubar T.; Trukhanov S.; Trukhanov A.; Manikandan A.; Alahmari F.; Baykal A. Influence of Dy3+ ions on the microstructures and magnetic, electrical, and microwave properties of [Ni0.4Cu0.2Zn0.4](Fe2–xDyx)O4 (0.00 ≤ x ≤ 0.04) spinel ferrites. ACS Omega 2021, 6, 15, 10266–10280.
M.A. Almessiere, Y. Slimani, İA. Auwal, S.E. Shirsath, A. Manikandan, A. Baykal, B. Özçelik, İ Ercan, S.V. Trukhanov, D.A. Vinnik, A.V. Trukhanov, Impact of Tm3+ and Tb3+ rare earth cations substitution on the structure and magnetic parameters of Co-Ni nanospinel ferrite. Nanomaterials 10, 2384 (2020)
X. Tang, H. Zhang, H. Su, Z. Zhong, F. Bai, Influence of microstructure on the DC-bias-superposition characteristics of NiZn ferrites. IEEE Trans. Magn. 47, 4332–4335 (2011)
L. Huan, X. Tang, H. Su, H. Zhang, Y. Jing, B. Liu, Effects of SnO2 on DC-bias-superposition characteristic of the low-temperature-fired NiCuZn ferrites. IEEE Trans. Mag. 50, 2006104 (2014)
L. Huan, X. Tang, H. Su, H. Zhang, Y. Jing, Effects of SiO2 concentration on the DC-bias-superposition characteristics of the NiCuZn ferrites. J. Mater. Sci. 26, 3275–3281 (2015)
H.I. Hsiang, J.F. Chueh, Bi2O3 Addition effects on the sintering mechanism, magnetic properties, and DC superposition behavior of NiCuZn ferrites. Int. J. Appl. Ceram. Technol. 12, 1008–1015 (2015)
S. Yan, L. Dong, Z. Chen, X. Wang, Z. Feng, The effect of the microstructure on the DC-bias superposition characteristic of NiCuZn ferrite. J. Magn. Magn. Mater. 353, 47–50 (2014)
H.I. Hsiang, J.L. Wu, Cooling rate effects on the microstructure, magnetic properties, and DC superposition behavior of NiCuZn ferrites. Int. J. Appl. Ceram. Technol. 12, 1065–1070 (2015)
H.I. Hsiang, J.L. Wu, Copper-rich phase segregation effects on the magnetic properties and DC-bias-superposition characteristic of NiCuZn ferrites. J. Magn. Magn. Mater. 374, 367–371 (2015)
H.I. Hsiang, W.C. Kuo, C.S. Hsi, Sintering and cooling atmosphere effects on the microstructure, magnetic properties and DC superposition behavior of NiCuZn ferrites. J. Eur. Ceram. Soc. 37, 2123–2128 (2017)
M.A. Almessiere, B. Unal, Y. Slimani, H. Gungunes, M.S. Toprak, N. Tashkandi, A. Baykal, M. Sertkol, A.V. Trukhanov, A. Yıldız, A. Manikandan, Effects of Ce–Dy rare earths co-doping on various features of Ni–Co spinel ferrite microspheres prepared via hydrothermal approach. J. Mater. Res. Technol. 14, 2534–2553 (2021)
M.A. Almessiere, Y. Slimani, H. Güngüneş, A.D. Korkmaz, S.V. Trukhanov, S. Guner, F. Alahmari, A.V. Trukhanov, A. Baykal, Correlation between chemical composition, electrical, magnetic and microwave properties in Dy-substituted Ni-Cu-Zn ferrites. Mater. Sci. Eng. B 270, 115202 (2021)
A. Barba, C. Clausell, J.C. Jarque, M. Monzó, ZnO and CuO crystal precipitation in sintering Cu-doped Ni-Zn ferrites. I. Influence of dry relative density and cooling rate. J. Eur. Ceram. Soc. 31, 2119–2128 (2011)
M. Fujimoto, Inner stress induced by Cu metal precipitation at grain boundaries in low-temperature-fired Ni-Zn-Cu ferrite. J. Am. Ceram. Soc. 77, 2873–2878 (1994)
H. Naghib zadeh, G. Oder, J. Hesse, T. Reimann, J. Töpfer, T. Rabe, Effect of oxygen partial pressure on co-firing behavior and magnetic properties of LTCC modules with integrated NiCuZn ferrite layers. J. Electroceram. 37, 100–109 (2016)
K. Sun, Z. Lan, Z. Yu, L. Li, J. Huang, X. Zhao, Grain growth, densification and magnetic properties of NiZn ferrites with additive. J. Phys. D. 41, 235002 (2008)
A. Lucas, R. Lebourgeois, F. Mazaleyrat, E. Laboure, Temperature dependence of core loss in cobalt substituted Ni-Zn-Cu ferrites. J. Magn. Magn. Mater. 323, 735–739 (2011)
J. Mürbe, J. Töpfer, Ni-Cu-Zn Ferrites for low temperature firing: II. Effects of powder morphology and Bi2O3 addition on microstructure and permeability. J. Electroceram. 16, 199–205 (2006)
S.C. Byeon, H.J. Je, K.S. Hong, Microstructural optimization of low-temperature-fired Ni-Zn-Cu ferrites using calcination. Jpn. J. Appl. Phys. 36, 5103–5108 (1997)
H. Huili, B. Grindi, A. Kouki, G. Viau, L.B. Tahar, Effect of sintering conditions on the structural, electrical, and magnetic properties of nanosized Co0.2Ni0.3Zn0.5Fe2O4. Ceram. Int. 41, 6212–6225 (2015)
E.M.M. Ewais, M.M. Hessien, A.H.A. El-Geassy, In-Situ synthesis of magnetic Mn-Zn ferrite ceramic object by solid state reaction. J. Aust. Ceram. Soc. 44, 57–62 (2008)
J. Mürbe, J. Töpfer, High permeability Ni–Cu–Zn ferrites through additive-free low-temperature sintering of nanocrystalline powders. J. Eur. Ceram. Soc. 32, 1091–1098 (2012)
J. Mürbe, J. Töpfer, Low temperature sintering of sub-stoichiometric Ni–Cu–Zn ferrites: shrinkage, microstructure and permeability. J. Magn. Magn. Mater. 324, 578–583 (2012)
H. Su, Q. Luo, Y. Jing, Y. Li, H. Zhang, X. Tang, Effects of calcination temperature and flux doping on the microstructure and magnetic properties of low-temperature-fired NiCuZn ferrites. J. Magn. Magn. Mater. 469, 419–427 (2019)
C.X. Ouyang, S. Xiao, J. Zhu, H. Wang, Effects of solid-state reaction temperature on the activation energy and DC-bias superposition of NiCuZn ferrites based on master sintering curve. Adv. Appl. Ceram. 115, 1–7 (2016)
B.H. Guan, H. Soleimani, N. Yahya, N.R.A. Latiff, Phase evolution and crystallite size of Ni0.25Zn0.75Fe2O4 at different calcination temperatures. Adv. Mater. Res. 925, 290–294 (2014)
Z. Huang, X. Sun, Z. Xiu, S. Chen, C.T. Tsai, Precipitation synthesis and sintering of yttria nanopowders. Mater. Lett. 58, 2137–2142 (2004)
R. Cabiscol, H. Shi, I. Wünsch, V. Magnanimo, J.H. Finke, S. Luding, A. Kwade, Effect of particle size on powder compaction and tablet strength using limestone. Adv. Powder Technol. 31, 1280–1289 (2020)
M.A. Occhionero, J.W. Halloran, The influence of green density upon sintering, in Materials science research. ed. by G.C. Kuczynski, A.E. Miller, G.A. Sargent (Springer, Boston, 1984)
H. Su, H. Zhang, X. Tang, Z. Zhong, F. Bai, Influences of high calcination temperature on densification and magnetic properties of low-temperature-fired NiCuZn ferrites. IEEE Trans. Magn. 47, 4328–4331 (2011)
J. Zheng, J.S. Reed, Effects of particle packing characteristics on solid-state sintering. J. Am. Ceram. Soc. 72, 810–817 (1989)
G. Liu, B. Dai, Y. Ren, H. He, W. Zhang, Microstructure and magnetic properties of Ni0·75Zn0·25Fe2O4 ferrite prepared using an electric current-assisted sintering method. Ceram. Int. 47, 11951–11957 (2021)
S.M. Kabbur, U.R. Ghodake, D.Y. Nadargi, R.C. Kambale, S.S. Suryavanshi, Effect of Dy3+ substitution on structural and magnetic properties of nanocrystalline Ni-Cu-Zn ferrites. J. Magn. Magn. Mater. 451, 665–675 (2018)
C.A. Stergiou, V. Zaspalis, Analysis of the complex permeability of NiCuZn ferrites up to 1GHz with regard to Cu content and sintering temperature. Ceram. Int. 40, 357–366 (2014)
T.Y. Byun, S.C. Bycon, K.S. Hong, Factors affecting initial permeability of Co-substituted Ni-Zn-Cu ferrites. IEEE Trans. Mag. 35, 3445–3447 (1999)
T. Tsutaoka, Frequency dispersion of complex permeability in Mn–Zn and Ni–Zn spinel ferrites and their composite materials. J. Appl. Phys. 93, 2789–2796 (2003)
M.T. Johnson, E.G. Visser, A coherent model for the complex permeability in polycrystalline ferrites. IEEE Trans. Magn. 26, 1987–1989 (1990)
H. Su, C. Zhao, Y. Li, Y. Jing, H. Zhang, X. Tang, Theoretical and experimental demonstration of the relationship between microstructure and the DC-bias-superposition characteristic of ferrite materials. Mater. Res. Bull. 107, 37–40 (2018)
Acknowledgements
This research is co-funded by the National Science and Technology Council (NSTC 111-2622-8-006-024-SB) and National Cheng Kung University. The authors gratefully acknowledge using the Core Facility Center of National Cheng Kung University.
Funding
National Science and Technology Council, Taiwan (110-2622-8-006-024-SB).
Author information
Authors and Affiliations
Contributions
Conceptualization: H.-I.H. and Y.-C.C; Data curation: Y.-C.C.; Formal analysis: Y.-C.C.; Funding acquisition: Y.-C.C. and Y.-H.S.; Investigation: Y.-C.C.; Methodology: Y.-C.C.; Resources: H.-I.H.; Software: Y.-C.C.; Validation: H.-I.H. and Y.-C.C.; Writing—original draft: H.-I.H.; Writing—review and editing: Y.-H.S. All authors have read and agreed to the published version of the manuscript.
Corresponding author
Ethics declarations
Conflict of interest
The authors declare no conflict of interest.
Ethical approval
Not applicable.
Informed consent
Not applicable.
Additional information
Publisher's Note
Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.
Rights and permissions
Springer Nature or its licensor (e.g. a society or other partner) holds exclusive rights to this article under a publishing agreement with the author(s) or other rightsholder(s); author self-archiving of the accepted manuscript version of this article is solely governed by the terms of such publishing agreement and applicable law.
About this article
Cite this article
Chang, YC., Shen, YH. & Hsiang, HI. Effects of calcination temperature on the microstructure and magnetic properties of low-temperature-fired Ni0.4Cu0.15Zn0.45Fe1.98O3.97 ferrites. J Mater Sci: Mater Electron 35, 831 (2024). https://doi.org/10.1007/s10854-024-12601-9
Received:
Accepted:
Published:
DOI: https://doi.org/10.1007/s10854-024-12601-9