Abstract
A promising research approach is currently oriented toward the investigation of multilayer films, consisting of the combination of metal elements and Al-doped ZnO (AZO) films for potential future applications. In this context, we focus on the preparation, characterization and film thickness effects on different properties of Cu/AZO bilayers. Hence, a multi-source RF magnetron sputtering deposition system in confocal configuration, under optimized conditions, was used to successfully deposit Cu/AZO bilayers on glass substrates with increasing Cu thickness, up to 13 nm, and a constant AZO thickness of 65 nm. The structural, morphological, electrical, optical and luminescent properties of all samples were characterized by X-ray diffraction (XRD), atomic force microscopy (AFM), UV–vis spectroscopy, Hall effect and photoluminescence (PL) techniques. The obtained results indicated that all the samples show a würtzite hexagonal structure with a preferential orientation in the axis c (002). The homogeneity of Cu layers is obtained for 10 and 13 nm thicknesses, and the optical properties are strongly affected by the existence of Cu. Moreover, increasing Cu thickness leads to (i) an improvement of structural and electrical (resistivity, mobility and carrier density) properties, (ii) a decrease in transmittance, (iii) a widening of the optical gap, and (iv) a variation of UV–violet emission intensity. These very interesting results are of great importance for understanding the behavior of Cu/AZO bilayers, which form a milestone for future potential applications in coatings and photovoltaics.
Similar content being viewed by others
Data availability
Data sharing is not applicable to this article as no datasets were generated or analyzed during the current study.
References
M. Okuya, N. Ito, K. Shiozaki, Thin Solid Films 515, 8656–8659 (2007). https://doi.org/10.1016/j.tsf.2007.03.148
T. Minami, Semicond. Sci. Technol. 20, 35–44 (2005). https://doi.org/10.1088/0268-1242/20/4/004
T. Söderström, F.-J. Haug, X. Niquillie, C. Ballif, Prog. Photovolt: Res. Appl. 17, 165–176 (2009). https://doi.org/10.1002/pip.869
R.K. Chava, M. Kang, J. Alloys Compd. 692, 67–76 (2017). https://doi.org/10.1016/j.jallcom.2016.09.029
J. Marks, J.G.C. Veinot, J. Cui, H. Yan, A. Wang, N.L. Edleman, J. Ni, Q. Huang, P. Lee, N.R. Armstrong, Synth. Met. 12, 29–35 (2002). https://doi.org/10.1016/S0379-6779(01)00593-8
Y.S. Kim, W.J. Hwang, K.T. Eun, S.H. Choa, Appl. Surf. Sci. 257, 8134–8138 (2011). https://doi.org/10.1016/j.apsusc.2011.04.123
V.S. Bhati, M. Hojamberdiev, M. Kumar, Energy Rep. 6, 46–62 (2020). https://doi.org/10.1016/j.egyr.2019.08.070
Q. Xu, L. Cheng, L. Meng, Z. Wang, S. Bai, X. Tian, X. Jin, Y. Qin, ACS Appl. Mater. Interfaces 11, 26127–26133 (2019). https://doi.org/10.1021/acsami.9b09264
S. Nagar, S. Chakrabarti, Optimisation of ZnO Thin Films, Implants, Properties, and Device Fabrication (Springer, Singapore, 2017)
M. Mohamedi, F. Challali, T. Touam, D. Mendil, S. Ouhenia, A.H. Souici, D. Djouadi, A. Chelouche, J. Lumin. 244, 118739 (2022). https://doi.org/10.1016/j.jlumin.2022.118739
C.Y. Tsay, H.C. Cheng, Y.T. Tung, W.H. Tuan, C.K. Lin, Thin Solid Films 517, 1032–1036 (2008). https://doi.org/10.1016/j.tsf.2008.06.030
J. Yang, Y. Jiang, L. Li, M. Gao, Appl. Surf. Sci. 421, 446–452 (2017). https://doi.org/10.1016/j.apsusc.2016.10.079
M. Wang, L. Jiang, Y. Wang, E.J. Kim, S.H. Hahn, J. Am. Ceram. Soc. 98, 3022–3028 (2015). https://doi.org/10.1111/jace.13742
B. Soltabayev, M.A. Yıldırım, A. Ateş, S. Acar, Mater. Sci. Semicond. Process. 101, 28–36 (2019). https://doi.org/10.1016/j.mssp.2019.05.026
S. Yu, W. Zhang, L. Li, H. Dong, D. Xu, Y. Jin, Appl. Surf. Sci. 298, 44–49 (2014). https://doi.org/10.1016/j.apsusc.2014.01.037
M. Wu, S. Yu, G. Chen, L. He, L. Yang, W. Zhang, Appl. Surf. Sci. 324, 791–796 (2015). https://doi.org/10.1016/j.apsusc.2014.11.039
Y. Li, R. Yao, H. Wang, X. Wu, J. Wu, X. Wu, W. Qin, ACS Appl. Mater. Interfaces 9, 11711–11720 (2017). https://doi.org/10.1021/acsami.7b02609
J. Kennedy, P.P. Murmu, J. Leveneur, A. Markwitz, J. Futter, Appl. Surf. Sci. 367, 52–58 (2016). https://doi.org/10.1016/j.apsusc.2016.01.160
S. Wilken, V. Wilkens, D. Scheunemann, R.E. Nowak, K.V. Maydell, J. Parisi, H. Borchert, ACS Appl. Mater. Interfaces 7, 287–300 (2015). https://doi.org/10.1021/am5061917
S. Fernandez, F.B. Naranjo, Sol. Energy Mater. Sol. Cells 94, 157–163 (2010). https://doi.org/10.1016/j.solmat.2009.08.012
Ü. Özgür, Y.I. Alivov, C. Liu, A. Teke, M.A. Reshchikov, S. Doğan, V. Avrutin, S.-J. Cho, H. Morkoçd, Int. J. Appl. Phys. 98, 041301 (2005). https://doi.org/10.1063/1.1992666
H.J. Cho, K.W. Park, J.K. Ahn, N.J. Seong, S.G. Yoon, W.H. Park, S.M. Yoon, D.J. Park, J.Y. Lee, J. Electrochem. Soc. 156, J215 (2009). https://doi.org/10.1149/1.3147376
Y. Li, M. Wu, Y. Sun, S. Yu, J. Mater. Sci. Mater. Electron. 30, 13271–13279 (2019). https://doi.org/10.1007/s10854-019-01690-6
Y. Liu, S. Zhu, B. Song, Results Phys. 13, 102286 (2019). https://doi.org/10.1016/j.rinp.2019.102286
D.S. Ghosh, T.L. Chen, N. Formica, J. Hwang, I. Bruder, V. Pruneri, Sol. Energy Mater. Sol. Cells 107, 338–343 (2012). https://doi.org/10.1016/j.solmat.2012.07.009
H.J. Pereira, R.A. Hatton, Front. Mater. 6, 1–8 (2019). https://doi.org/10.3389/fmats.2019.00228
A. Bouhadiche, S. Benghorieb, T. Touam, D. Mendil, A. Chelouche, J. Cryst. Growth 556, 125992 (2020). https://doi.org/10.1016/j.jcrysgro.2020.125992
D.R. Sahu, S.Y. Lin, J.L. Huang, Thin Solid Films 516, 4728–4732 (2008). https://doi.org/10.1016/j.tsf.2007.08.089
X. Yan, S. Venkataraj, A.G. Aberle, Energy Procedia 33, 157–165 (2013). https://doi.org/10.1016/j.egypro.2013.05.053
S. Cho, Trans. Electr. Electron. Mater. 10, 185–188 (2009). https://doi.org/10.4313/TEEM.2009.10.6.185
N.P. Dasgupta, S. Neubert, W. Lee, O. Trejo, J.-R. Lee, F.B. Prinz, Chem. Mater. 22, 4769–4775 (2010). https://doi.org/10.1021/cm101227h
T. Wang, H.P. Ma, J.-G. Yang, J.-T. Zhu, H. Zhang, J. Feng, S.-J. Ding, H.-L. Lu, D.W. Zhang, J. Alloys Compd. 744, 381–385 (2018). https://doi.org/10.1016/j.jallcom.2018.02.115
Y.P. Wang, J.G. Lu, X. Bie, Z.Z. Ye, X. Li, D. Song, X.Y. Zhao, W.Y. Ye, Appl. Surf. Sci. 257, 5966–5971 (2011). https://doi.org/10.1016/j.apsusc.2011.01.068
W. Yang, H. Yang, J. Su, X. Zhang, Vacuum 205, 111419 (2022). https://doi.org/10.1016/j.vacuum.2022.111419
D. Mendil, F. Challali, T. Touam, A. Chelouche, A.H. Souici, S. Ouhenia, D. Djouadi, J. Lumin. 215, 116631 (2019). https://doi.org/10.1016/j.jlumin.2019.116631
J. Wang, D. Ni, T. Zhang, D. Wang, K. Liang, J. Mater. Sci. Mater. Electron. 26, 8035–8039 (2015). https://doi.org/10.1007/s10854-015-3460-y
K. Necib, T. Touam, A. Chelouche, L. Ouarez, D. Djouadi, B. Boudine, J. Alloys Compd. 735, 2236–2246 (2018). https://doi.org/10.1016/j.jallcom.2017.11.361
A. Hojabri, F. Hajakbari, N. Soltanpoor, M.S. Hedayati, J. Theor. Appl. Phys. 8, 132–139 (2014). https://doi.org/10.1007/s40094-014-0132-x
M. Chen, Z.L. Pei, C. Sun, L.S. Wen, X. Wang, J. Cryst. Growth 220, 254–262 (2000). https://doi.org/10.1016/S0022-0248(00)00834-4
B.D. Cullity, S.R. Stock, Elements of X-Ray Diffraction, 3rd edn. (Pearson Education Ltd., Essex, 2014)
E.S. Tüzemen, S. Eker, H. Kavak, R. Esen, Appl. Surf. Sci. 255, 6195–6200 (2009). https://doi.org/10.1016/j.apsusc.2009.01.078
J.H. Jou, M.Y. Han, D.J. Cheng, J. Appl. Phys. 71, 4333–4336 (1992). https://doi.org/10.1063/1.350815
J.A. Thornton, D.W. Hoffman, Thin Solid Films 171, 5–31 (1989). https://doi.org/10.1016/0040-6090(89)90030-8
J. Singh, S. Ranwa, J. Akhtar, M. Kumar, AIP Adv. 5, 067140 (2015). https://doi.org/10.1063/1.4922911
T. Dimopoulos, G.Z. Radnoczi, Z.E. Horváth, H. Brückl, Thin Solid Films 520, 5222–5226 (2012). https://doi.org/10.1016/j.tsf.2012.03.103
W. Zhang, J. Xiong, L. Liu, X. Zhang, H. Gu, Sol. Energy Mater. Sol. Cells 153, 52–60 (2016). https://doi.org/10.1016/j.solmat.2016.04.015
D.R. Sahu, J.L. Huang, Appl. Surf. Sci. 253, 915–918 (2006). https://doi.org/10.1016/j.apsusc.2006.01.035
D. Miao, S. Jiang, S. Shang, H. Zhao, Z. Chen, J. Mater. Sci. Mater. Electron. 25, 5248–5254 (2014). https://doi.org/10.1007/s10854-014-2297-0
J. Tauc, Mater. Res. Bull. 33, 37–46 (1968). https://doi.org/10.1016/0025-5408(68)90023-8
M. Wang, E.J. Kim, S. Kim, J.S. Chung, I. Yoo, E.W. Hahn, S.H. Shin, C. Park, Thin Solid Films 516, 1124–1129 (2008). https://doi.org/10.1016/j.tsf.2007.05.039
T. Touam, M. Atoui, I. Hadjoub, A. Chelouche, B. Boudine, A. Fischer, A. Boudrioua, A. Doghmane, Eur. Phys. J. Appl. Phys. 67, 30302 (2014). https://doi.org/10.1051/epjap/2014140228
R. Viswanatha, S. Chakraborty, S. Basu, D.D. Sarma, J. Phys. Chem. B 110, 22310–22312 (2006). https://doi.org/10.1021/jp065384f
C.A. Parker, J.C. Roberts, S.M. Bedair, M.J. Reed, S.X. Liu, N.A. El-Masry, L.H. Robins, Appl. Phys. Lett. 75, 2566–2568 (1999). https://doi.org/10.1063/1.125079
L. Liu, Z. Mei, A. Tang, A. Azarov, A. Kuznetsov, Q.-K. Xue, X. Du, Phys. Rev. B 93, 235305 (2016). https://doi.org/10.1103/PhysRevB.93.235305
M. Mahanti, D. Basak, J. Lumin. 145, 19–24 (2014). https://doi.org/10.1016/j.jlumin.2013.07.028
L. Ouarez, A. Chelouche, T. Touam, R. Mahiou, D. Djouadi, A. Potdevin, J. Lumin. 203, 222–229 (2018). https://doi.org/10.1016/j.jlumin.2018.06.049
S. Park, Y. Mun, S. An, W. Lee, C. Lee, J. Lumin. 147, 5–8 (2014). https://doi.org/10.1016/j.jlumin.2013.10.044
Y. Xu, B. Yao, Y.F. Li, Z.H. Ding, J.C. Li, H.Z. Wang, Z.Z. Zhang, L.G. Zhang, H.F. Zhao, D.Z. Shen, J. Alloys Compd. 585, 479–484 (2014). https://doi.org/10.1016/j.jallcom.2013.09.199
Funding
The authors have not disclosed any funding.
Author information
Authors and Affiliations
Contributions
NEAD, SC, FC, AC were involved in investigation; TT contributed to Writing—original draft.
Corresponding author
Ethics declarations
Conflict of interest
The authors have no competing interests to declare that are relevant to the content of this article.
Additional information
Publisher's Note
Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.
Rights and permissions
Springer Nature or its licensor (e.g. a society or other partner) holds exclusive rights to this article under a publishing agreement with the author(s) or other rightsholder(s); author self-archiving of the accepted manuscript version of this article is solely governed by the terms of such publishing agreement and applicable law.
About this article
Cite this article
Doghmane, N.E.A., Chettibi, S., Challali, F. et al. Confocal magnetron sputtering deposition of Cu/AZO bilayer structures: effect of Cu thickness on microstructural and optoelectronic properties. J Mater Sci: Mater Electron 33, 26717–26727 (2022). https://doi.org/10.1007/s10854-022-09338-8
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s10854-022-09338-8