Abstract
BaBi4Ti4O15 (BBT) ceramic powders were synthesized using the conventional solid-state reaction method with different calcining temperatures. Effect of the calcining temperature on the structural and electrical properties of the BBT ceramics was investigated. Phase structure of the BBT calcination powders was dependence of the calcining temperature. Results of the X-ray diffraction analyses indicated that the single phase could be obtained with the decrease in the volume of crystal cell by increasing the calcining temperature. Piezoelectric and ferroelectric properties of the BBT ceramics were significantly dependence of the calcining temperature. The maximum of piezoelectric coefficient was 23 pC/N for the ceramics with calcining temperature of 780 °C, together with higher Curie temperature (~ 422 °C) and larger remnant polarization (~ 4.9 μC/cm2). Results for the calcining temperatures dependence of structural and electrical properties of BBT ceramics were also discussed.
Similar content being viewed by others
References
Z.Y. Zhou, R.H. Liang, Y.C. Li, X.L. Dong, J. Am. Ceram. Soc. 98, 3925–3929 (2015)
R.C. Turner, P.A. Fuierer, R.E. Newnham, T.R. Shrout, Appl. Acoust. 41, 299–324 (1994)
X.P. Jiang, X.L. Fu, C. Chen, N. Tu, M.Z. Xu, X.H. Li, H. Shao, Y.J. Chen, J. Adv. Ceram. 4, 54–60 (2015)
S.J. Zhang, F.P. Yu, J. Am. Ceram. Soc. 94, 3153–3170 (2011)
D. Damjanovic, Materials for high temperature piezoelectric transducers. Curr. Opin. Solid. State. Mater. Sci. 3, 469–473 (1998)
S. Kumar, S. Kundu, D.A. Ochoa, J.E. Garcia, K.B.R. Varma, Mater. Chem. Phys. 136, 680–687 (2012)
C.B. Long, W. Ren, K. Zheng, H.Q. Fan, Mater. Res. Lett. 8, 165–172 (2020)
E.C. Subbarao, J. Phys. Chem. Solids 23, 665–676 (1962)
E.C. Subbarao, J. Am. Ceram. Soc. 45, 166–169 (1962)
R. Jose, P. Vineetha, S.C. Prasanth, A. Vijay, K.V. Saravanan, Mater. Res. Express. 7, 016302 (2020)
J. Yuan, R. Nie, Q. Chen, D.Q. Xiao, J.G. Zhu, Mater. Res. Bull. 115, 70–79 (2019)
P. Nayak, T. Badapanda, S. Anwar, S. Panigrahi, Phase Trans. 88, 430–444 (2015)
J.Q. Zhong, C. Wu, D. Wang, Y.L. Shi, J.G. Zhu, Q. Chen, J. Alloys Compd. 794, 210–217 (2019)
H.B. Chen, F. Fu, J.W. Zhai, Jpn. J. Appl. Phys. 50, 050207 (2011)
P.Y. Fang, H.Q. Fan, J. Li, L. Chen, F.J. Liang, J. Alloys Compd. 497, 416–419 (2010)
P.Y. Fang, Z.Z. Xi, W. Long, X.J. Li, S.C. Chen, Solid State Commun. 231, 1–5 (2016)
J.D. Bobic, M.M. Vijatovic, S. Greicius, J. Banys, B.D. Stojanovic, J. Alloys Compd. 499, 221–226 (2010)
A. Khokhar, P.K. Goyal, O.P. Thakur, K. Sreenivas, Ceram. Int. 41, 4189–4198 (2015)
C.L. Diao, J.B. Xu, H.W. Zheng, L. Fang, Y.Z. Gu, W.F. Zhang, Ceram. Int. 39, 6991–6995 (2013)
P.Y. Fang, H.Q. Fan, Z.Z. Xi, W.X. Chen, S.C. Chen, W. Long, X.J. Li, J. Alloys. Compd. 550, 335–338 (2013)
P.Y. Fang, Z.Z. Xi, W. Long, X.J. Li, J. Li, J. Alloys. Compd. 575, 61–64 (2013)
C.B. Long, H.Q. Fan, M.M. Li, G.Z. Dong, Q. Li, Scripta. Mater. 75, 70–73 (2014)
Z.Y. Shen, H.J. Sun, Y.X. Tang, Y.M. Li, S.J. Zhang, Mater. Res. Bull. 63, 129–133 (2015)
L.L. Li, H.B. Yuan, P.M. Huang, Y.H. Zhang, L.S. Sheng, P. Zheng, L. Zhang, F. Wen, W. Wu, Z. Xu, Ceram. Int. 46, 2178–2184 (2020)
A. Khokhar, M.L.V. Mahesh, A.R. James, P.K. Goyal, K. Sreenivas, J. Alloys Compd. 581, 150–159 (2013)
Z.L. Guo, C.M. Wang, T.L. Zhao, S.L. Yu, Z.P. Cao, Mater. Chem. Phys. 140, 260–265 (2013)
A. Chakrabarti, J. Bera, T.P. Sinha, Phys. B 404, 1498–1502 (2009)
J.D. Bobic, M.M. Vijatovic Petrovic, N.I. Ilic, E. Palaimiene, R. Grigalaitis, C.O. Paiva Santos, M. Cilence, B.D. Stojanovic, Ceram. Int. 41, 309–316 (2015)
X.J. Li, Q. Jing, Z.Z. Xi, P. Liu, W. Long, P.Y. Fang, J. Am. Ceram. Soc. 101, 789–799 (2018)
Z.N. Chen, Y.H. Zhang, P.M. Huang, X.D. Li, J. Du, W.F. Bai, L.L. Li, F. Wen, P. Zheng, W. Wu, L. Zheng, Y. Zhang, J. Phys. Chem. Solids. 136, 109195 (2020)
J. Tellier, Ph. Boullay, M. Manier, D. Mercurio, J. Solid. State. Chem. 177, 1829–1837 (2004)
C.B. Gozzo, A.J. Terezo, E.H.N.S. Thaines, A.J.M. Sales, R.G. Freitas, A.S.B. Sombra, M.M. Costa, J. Sci: Adv. Mater. Dev. 4, 170–179 (2019)
L.J. Liu, H.Q. Fan, P.Y. Fang, Solid. State. Commun. 142, 573–576 (2007)
H.F. Cheng, J. Appl. Phys. 56, 1831–1837 (1984)
C.C. Wang, C.M. Lei, G.J. Wang, X.H. Sun, T. Li, S.G. Huang, H. Wang, Y.D. Li, J. Appl. Phys. 113, 094103 (2013)
I. Coondoo, A.K. Jha, S.K. Agarwal, J. Eur. Ceram. Soc. 27, 253–260 (2007)
Acknowledgements
This work was supported by the National Natural Science Foundation of China (51472197 and 51602242), the Shaanxi Key Laboratory Fundament Research Foundation (18JS049) and the Fundamental Research Foundation (XAGDXJJ17009) of XATU of China.
Author information
Authors and Affiliations
Corresponding author
Additional information
Publisher's Note
Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.
Rights and permissions
About this article
Cite this article
Xu, L., Fang, P., Guo, F. et al. BaBi4Ti4O15 ceramics: calcination temperature dependence of the phase formation and electrical properties. J Mater Sci: Mater Electron 32, 2805–2813 (2021). https://doi.org/10.1007/s10854-020-05033-8
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s10854-020-05033-8