Skip to main content
SpringerLink
Log in

Effects of mixed solvent on morphology of CH3NH3PbI3 absorption layers and photovoltaic performance of perovskite solar cells

  • Published:
Journal of Materials Science: Materials in Electronics Aims and scope Submit manuscript

Abstract

In this paper, a two-step method is used to prepare a high-quality CH3NH3PbI3 layer for carbon-based hole conductor-free perovskite solar cells (PSCs). In the first step, the solvent for the PbI2/DMF solution is changed to a mixed solvent of N,N-dimethylformamide (DMF) with dimethyl sulfoxide (DMSO) from pure DMF solvent. This process requires 3.5 h for PbI2 films deposited from the PbI2/DMF solution to completely convert to perovskite in a methyl amine iodide (MAI)/iso-propyl alcohol (IPA) solution, and perovskite films have a rough surface with a few large crystals. This mixed solvent accelerates the conversion of PbI2 to CH3NH3PbI3, resulting in smooth CH3NH3PbI3 films without residual PbI2. Only 15 min are required for PbI2 films to completely convert to perovskite when the volume ratio of DMSO to DMF is 1:4. As a result, the photovoltaic performance, especially on the fill factor (FF) of PSCs fabricated from DMF/DMSO solvent, improved mainly due to the better contact of perovskite/carbon interface and faster charge transport of the perovskite layer.

This is a preview of subscription content, log in via an institution to check access.

Access this article

Log in via an institution

Price excludes VAT (USA)
Tax calculation will be finalised during checkout.

Instant access to the full article PDF.

Institutional subscriptions

Fig. 1
Fig. 2
Fig. 3
Fig. 4
Fig. 5
Fig. 6
Fig. 7
Fig. 8

Similar content being viewed by others

References

  1. A. Kojima, K. Teshima, Y. Shirai, T. Miyasaka, Organometal halide perovskites as visible-light sensitizers for photovoltaic cells. J. Am. Chem. Soc. 131, 6050–6051 (2009)

    Article  CAS  Google Scholar 

  2. M.A. Green, K. Emery, Y. Hishikawa, W. Warta, E.D. Dunlop, Solar cell efficiency tables (version 48). Prog. Photovoltaics 24, 905–913 (2016)

    Article  Google Scholar 

  3. S.D. Stranks, G.E. Eperon, G. Grancini, C. Menelaou, M.J.P. Alcocer, T. Leijtens, L.M. Herz, A. Petrozza, H.J. Snaith, Electron-hole diffusion lengths exceeding 1 micrometer in an organometal trihalide perovskite absorber. Science 342, 341–344 (2013)

    Article  CAS  Google Scholar 

  4. H.N. Chen, Z.H. Wei, H.X. He, X.L. Zheng, K.S. Wong, S.H. Yang, Solvent engineering boosts the efficiency of paintable carbon-based perovskite solar cells to beyond 14%. Adv. Energy Mater. 6, 1502087 (2016)

    Article  Google Scholar 

  5. L. Etgar, P. Gao, Z.S. Xue, Q. Peng, A.K. Chandiran, B. Liu, M.K. Nazeeruddin, M. Grätzel, Mesoscopic CH3NH3PbI3/TiO2 heterojunction solar cells. J. Am. Chem. Soc. 134, 17396–17933 (2012)

    Article  CAS  Google Scholar 

  6. M.M. Lee, J. Teuscher, T. Miyasaka, T.N. Murakami, H.J. Snaith, Efficient hybrid solar cells based on meso-superstructured organometal halide perovskites. Science 338, 643–647 (2012)

    Article  CAS  Google Scholar 

  7. H. Zhou, Q. Chen, G. Li, S. Luo, T.B. Song, H.S. Duan, Z. Hong, J. You, Y. Liu, Y. Yang, Interface engineering of highly efficient perovskite solar cells. Science 345, 542–546 (2014)

    Article  CAS  Google Scholar 

  8. H. Wei, J. Xiao, Y. Yang, S. Lv, J. Shi, X. Xu, J. Dong, Y. Luo, D. Li, Q. Meng, Free-standing flexible carbon electrode for highly efficient hole-conductor-free perovskite solar cells. Carbon 93, 861–868 (2015)

    Article  CAS  Google Scholar 

  9. H.S. Kim, C.R. Lee, J.H. Im, K.B. Lee, T. Moehl, A. Marchioro, S.J. Moon, R. Humphry-Bake, J.H. Yum, J.E. Moser, M. Grätzel, N.G. Park, Lead iodide perovskite sensitized all-solid-state submicron thin film mesoscopic solar cell with efficiency exceeding 9%. Sci. Rep. 2, 591 (2012)

    Article  Google Scholar 

  10. J. Burschka, N. Pellet, S.J. Moon, R. Humphry-Baker, P. Gao, M.K. Nazeeruddin, M. Grätzel, Sequential deposition as a route to high-performance perovskite-sensitized solar cells. Nature 499, 316–319 (2013)

    Article  CAS  Google Scholar 

  11. M. Liu, M.B. Johnston, H.J. Snaith, Efficient planar heterojunction perovskite solar cells by vapour deposition. Nature 501, 395–398 (2013)

    Article  CAS  Google Scholar 

  12. F. Hao, C.C. Stoumpos, Z. Liu, R.P.H. Chang, M.G. Kanatzidis, Controllable perovskite crystallization at a gas–solid interface for hole conductor-free solar cells with steady power conversion efficiency over 10%. J. Am. Chem. Soc. 136, 16411–16419 (2014)

    Article  CAS  Google Scholar 

  13. T. Li, Y. Pan, Z. Wang, Y. Xia, Y. Chen, W. Huang, Additive engineering for highly efficient organic–inorganic halide perovskite solar cells: recent advances and perspectives. J. Mater. Chem. A 5, 12602–12652 (2017)

    Article  CAS  Google Scholar 

  14. Z. Ren, M. Zhu, X. Li, C. Dong, An isopropanol-assisted fabrication strategy of pinhole-free perovskite films in air for efficient and stable planar perovskite solar cells. J. Power Sources 363, 317–326 (2017)

    Article  CAS  Google Scholar 

  15. T. Zhang, M. Yang, Y. Zhao, K. Zhu, Controllable sequential deposition of planar CH3NH3PbI3 perovskite films via adjustable volume expansion. Nano. Lett. 15, 3959–3963 (2015)

    Article  CAS  Google Scholar 

  16. D. Liu, M.K. Gangishetty, T.L. Kelly, Effect of CH3NH3PbI3 thickness on device efficiency in planar heterojunction perovskite solar cells. J. Mater. Chem. A 2, 19873–19881 (2014)

    Article  CAS  Google Scholar 

  17. F. Cai, L. Yang, Y. Yan, J. Zhang, F. Qin, D. Liu, Y.B. Cheng, Y. Zhou, T. Wang, Eliminated hysteresis and stabilized power output over 20% in planar heterojunction perovskite solar cells by compositional and surface modifications to the low-temperature-processed TiO2 layer. J. Mater. Chem. A 5, 9402–9411 (2017)

    Article  CAS  Google Scholar 

  18. J. You, Y. Yang, Z. Hong, T.B. Song, L. Meng, Y. Liu, C. Jiang, H. Zhou, W.H. Chang, G. Li, Y. Yang, Moisture assisted perovskite film growth for high performance solar cells. Appl. Phys. Lett. 105, 183902 (2014)

    Article  Google Scholar 

  19. R.A. Kerner, L. Zhao, Z. Xiao, B.P. Rand, Ultrasmooth metal halide perovskite thin films via sol-gel processing. J. Mater. Chem. A 4, 8308–8315 (2016)

    Article  CAS  Google Scholar 

  20. N. Yantara, D. Sabba, F. Yanan, J.M. Kadro, T. Moehl, P.P. Boix, S. Mhaisalkar, M. Gratzel, C. Gratzel, Loading of mesoporous titania films by CH3NH3PbI3 perovskite, single step vs. sequential deposition. Chem. Commun. 51, 4603–4606 (2015)

    Article  CAS  Google Scholar 

  21. J.H. Im, H.S. Kim, N.G. Park, Morphology-photovoltaic property correlation in perovskite solar cells: one-step versus two-step deposition of CH3NH3PbI3. APL Mater. 2, 081510 (2014)

    Article  Google Scholar 

  22. W.S. Yang, J.H. Noh, N.J. Jeon, Y.C. Kim, S. Ryu, J. Seo, S.I. Seok, High-performance photovoltaic perovskite layers fabricated through intramo-lecular exchange. Science 348, 1234–1237 (2015)

    Article  CAS  Google Scholar 

  23. M.V. Kovalenko, L. Protesescu, M.I. Bodnarchuk, Properties and potential optoelectronic applications of lead halide perovskite nanocrystals. Science 358, 745–750 (2017)

    Article  CAS  Google Scholar 

  24. P. Docampo, F.C. Hanusch, S.D. Stranks, M. Döblinger, J.M. Feckl, M. Ehrensperger, N.K. Minar, M.B. Johnston, H.J. Snaith, T. Bein, Solution deposition-conversion for planar heterojunction mixed halide perovskite solar cells. Adv. Energy Mater. 4, 1400355 (2014)

    Article  Google Scholar 

  25. J. Mo, C. Zhang, J. Chang, H. Yang, H. Xi, D. Chen, Z. Lin, G. Lu, J. Zhang, Y. Hao, Enhanced efficiency of planar perovskite solar cells via a two-step deposition using DMF as an additive to optimize the crystal growth behavior. J. Mater. Chem. A 5, 13032–13038 (2017)

    Article  CAS  Google Scholar 

  26. X.B. Cao, L.L. Zhi, Y.H. Li, F. Fang, X. Cui, Y.W. Yao, L.J. Ci, K.X. Ding, J.Q. Wei, Control of the morphology of PbI2 films for efficient perovskite solar cells by strong Lewis base additives. J. Mater. Chem. C 5, 7458–7464 (2017)

    Article  CAS  Google Scholar 

  27. Y. Wu, A. Islam, X. Yang, C. Qin, J. Liu, K. Zhang, W. Peng, L. Han, Retarding the crystallization of PbI2 for highly reproducible planar-structured perovskite solar cells via sequential deposition. Energy Environ. Sci. 7, 2934–2938 (2014)

    Article  CAS  Google Scholar 

  28. Y. Hou, S. Yang, X. Chen, C. Li, H. Zhao, H.G. Yang, Thermally induced crystallization of high quality CH3NH3PbI3 film with large grains for highly efficient perovskite solar cells. Chem. Eur. J. 23, 5658–5662 (2017)

    Article  CAS  Google Scholar 

  29. T. Baikie, Y. Fang, J.M. Kadro, M. Schreyer, F. Wei, S.G. Mhaisalkar, M. Graetzel, T.J. White, Synthesis and crystal chemistry of the hybrid perovskite (CH3NH3)PbI3 for solid-state sensitised solar cell applications. J. Mater. Chem. A 1, 5628–5641 (2013)

    Article  CAS  Google Scholar 

  30. M. Hiroshi, N. Yoshinaho, N. Miharu, The crystal structure of lead(II) iodide-dimethy lsulphoxide (1/2), PbI2 (DMSO)2. Chem. Lett. 9, 663–664 (1980)

    Article  Google Scholar 

  31. Y. Wu, X. Yang, H. Chen, K. Zhang, C. Qin, J. Liu, W. Peng, A. Islam, E. Bi, F. Ye, Highly compact TiO2 layer for efficient hole-blocking in perovskite solar cells. Appl. Phys. Express 7, 052301 (2014)

    Article  Google Scholar 

  32. D. Seol, A. Jeong, M.H. Han, S. Seo, T.S. Yoo, W.S. Choi, H.S.Y. Kim, Origin of hysteresis in CH3NH3PbI3 Perovskite thin films. Adv. Funct. Mater. 27, 1701924 (2017)

    Article  Google Scholar 

  33. H.J. Snaith, A. Abate, J.M. Ball, G.E. Eperon, T. Leijtens, N.K. Noel, S.D. Stranks, J.T. Wang, K. Wojciechowski, W. Zhang, Anomalous hysteresis in perovskite solar cells. J. Phys. Chem. Lett. 5, 1511–1515 (2014)

    Article  CAS  Google Scholar 

  34. H.S. Kim, N.G. Park, Parameters affecting I–V hysteresis of CH3NH3PbI3 perovskite solar cells: effects of perovskite crystal size and mesoporous TiO2 layer. J. Phys. Chem. Lett. 5, 2927–2934 (2014)

    Article  CAS  Google Scholar 

  35. T. Handa, D.M. Tex, A. Shimazaki, A. Wakamiya, Y. Kanemitsu, Charge injection mechanism at heterointerfaces in CH3NH3PbI3 perovskite solar cells revealed by simultaneous time-resolved photoluminescence and photocurrent measurements. J. Phys. Chem. Lett. 8, 954–960 (2017)

    Article  CAS  Google Scholar 

  36. B.J. Kim, D.H. Kim, Y.Y. Lee, H.W. Shin, G.S. Han, J.S. Hong, K. Mahmood, T.K. Ahn, Y.C. Joo, K.S. Hong, N.G. Park, S. Lee, H.S. Jung, Highly efficient and bending durable perovskite solar cells: toward a wearable power source. Energy Environ. Sci. 8, 916–921 (2015)

    Article  CAS  Google Scholar 

Download references

Acknowledgements

This work has been financially supported by the Science and Technology Program of the Guangdong Province of China (No. 2016A010104020), the Training Plan of Outstanding Young Teachers of Universities in the Guangdong Province (Grant No. YQ2015055) and Pearl River S&T Nova Program of Guangzhou (Grant No. 201610010116).

Author information

Authors and Affiliations

  1. Guangdong Provincial Key Laboratory of Functional Soft Condensed Matter, School of Material and Energy, Guangdong University of Technology, Guangzhou, 510006, China

    Haisong Zheng, Chenghui Li, Aixiang Wei, Jun Liu, Yu Zhao & Zhiming Xiao

  2. School of Information Science, Xin Hua College of Sun Yat-Sen University, Guangzhou, 510520, China

    Aixiang Wei

Authors
  1. Haisong Zheng
    View author publications

    You can also search for this author in PubMed Google Scholar

  2. Chenghui Li
    View author publications

    You can also search for this author in PubMed Google Scholar

  3. Aixiang Wei
    View author publications

    You can also search for this author in PubMed Google Scholar

  4. Jun Liu
    View author publications

    You can also search for this author in PubMed Google Scholar

  5. Yu Zhao
    View author publications

    You can also search for this author in PubMed Google Scholar

  6. Zhiming Xiao
    View author publications

    You can also search for this author in PubMed Google Scholar

Corresponding author

Correspondence to Aixiang Wei.

Rights and permissions

Reprints and permissions

About this article

Check for updates. Verify currency and authenticity via CrossMark

Cite this article

Zheng, H., Li, C., Wei, A. et al. Effects of mixed solvent on morphology of CH3NH3PbI3 absorption layers and photovoltaic performance of perovskite solar cells. J Mater Sci: Mater Electron 29, 18868–18877 (2018). https://doi.org/10.1007/s10854-018-0012-2

Download citation

  • Received:

  • Accepted:

  • Published:

  • Issue Date:

  • DOI: https://doi.org/10.1007/s10854-018-0012-2

Search

Navigation