Skip to main content
Log in

Influence of substrate temperature on crystalline copper aluminium oxide thin films synthesized through chemical spray pyrolysis (CSP) technique

  • Published:
Journal of Materials Science: Materials in Electronics Aims and scope Submit manuscript

Abstract

Copper aluminium oxide (CuAlO2) of well ordered crystalline films were deposited on to glass substrates with Cu/Al ratio r = 0.8 at the substrate temperatures of 250, 300, 350, 400 and 450 °C. Films which were characterized had a thickness of the order of few micrometers. Films deposited at the optimized deposition temperature (450 °C) revealed well-crystalline CuAlO2 phase with XRD peak at 2θ = 31.7° corresponds to (006) reflection. The peak positions of the core level XPS spectra, confirm the presence of delafossite CuAlO2 phase. The optical transmission of 80 % has been observed in the visible spectrum. The obtained band gap energy is 4.1 eV. From the observed results it was evidenced that the substrate temperature has strong influence on the structural and optical properties of the spray pyrolysed copper aluminium oxide films.

This is a preview of subscription content, log in via an institution to check access.

Access this article

Price excludes VAT (USA)
Tax calculation will be finalised during checkout.

Instant access to the full article PDF.

Fig. 1
Fig. 2
Fig. 3
Fig. 4
Fig. 5

Similar content being viewed by others

References

  1. H. Kawazoe, M. Yasukawa, H. Hyodo, M. Kurita, H. Yanagi, H. Hosono, Nature 389, 939 (1997)

    Article  Google Scholar 

  2. H. Cachet, A. Gamard, G. Campet, B. Jousseaume, T. Toupance, Thin Solid Films 388, 41 (2001)

    Article  Google Scholar 

  3. D.S. Ginley, C. Bright, MRS Bull. 25, 15 (2000)

    Article  Google Scholar 

  4. A.J. Freeman, K.R. Poeppelmeier, T.O. Mason, R.P.H. Chang, T.J. Marks, MRS Bull. 25, 45 (2000)

    Article  Google Scholar 

  5. J.R. Monnier, M.J. Hanrahan, G. Apai, J. Catal. 92, 119 (1985)

    Article  Google Scholar 

  6. L. Carreiro, Y.T. Qian, R. Kershaw, K. Dwight, A. Wold, Mater. Res. Bull. 20, 619 (1985)

    Article  Google Scholar 

  7. J.P. Doumere, C. Parent, J.C. Zhang, G. LeFlem, A. Ammar, Less-Common Met. 148, 333 (1989)

    Article  Google Scholar 

  8. A. Jacob, C. Parent, P. Boutinaud, G. LeFlem, J.P. Doumere, A. Ammar, M. Elazhari, M. Elaatmani, Solid State Commun. 103, 529 (1997)

    Article  Google Scholar 

  9. B. Saha, R. Thapa, S. Jana, K.K. Chattopadhyay, Indian J. Phys. 84, 1341 (2010)

    Article  Google Scholar 

  10. C. Bouzidi, H. Bouzouita, A. Timoumi, B. Rezig, Mater. Sci. Eng. B 118, 259 (2005)

    Article  Google Scholar 

  11. M. Singh, A. Ranga Rao, V. Dutta, Mater. Lett. 62, 3613 (2008)

    Article  Google Scholar 

  12. A.N. Banerjee, S. Kundoo, K.K. Chattopadhyay, Thin Solid Films 440, 5 (2003)

    Article  Google Scholar 

  13. A. Sivasankar Reddy, P. Sreedhara Reddy, S. Uthanna, G. Mohan Rao, J. Mater. Sci. Mater. Electron. 17, 615 (2006)

    Article  Google Scholar 

Download references

Author information

Authors and Affiliations

Authors

Corresponding author

Correspondence to A. Moses Ezhil Raj.

Rights and permissions

Reprints and permissions

About this article

Check for updates. Verify currency and authenticity via CrossMark

Cite this article

Kirupa, E.A., Raj, A.M.E. & Ravidhas, C. Influence of substrate temperature on crystalline copper aluminium oxide thin films synthesized through chemical spray pyrolysis (CSP) technique. J Mater Sci: Mater Electron 27, 8991–8995 (2016). https://doi.org/10.1007/s10854-016-4930-6

Download citation

  • Received:

  • Accepted:

  • Published:

  • Issue Date:

  • DOI: https://doi.org/10.1007/s10854-016-4930-6

Keywords

Navigation