Abstract
The aim of this study is to reveal the three detwinning events in AZ31 Mg alloy during in situ tensile test via electron backscatter diffraction (EBSD). To better understand the detwinning mechanisms, shear displacement gradient tensors were used to evaluate local strain accommodation. The results revealed that the strain concentration was responsible for the detwinning of the pre-existing twin. Also, for the two newly formed twins, the shear displacement gradient tensors of the basal and prismatic slip in the adjacent grains can hinder their growth and eventually lead to the detwinning. Detwinning can occur when grains lack effective deformation modes to accommodate the strain from neighboring grains. The kind of local strain accommodation was affected by twin variants and slip modes on both sides of the grain boundary.
Similar content being viewed by others
Data availability
The raw and processed data are not available at the time of submission because they are part of our ongoing research work.
References
Hirsch J, Al-Samman T (2013) Superior light metals by texture engineering: Optimized aluminum and magnesium alloys for automotive applications. Acta Mater 61:818. https://doi.org/10.1016/j.actamat.2012.10.044
Hazeli K, Cuadra J, Vanniamparambil PA, Kontsos A (2013) In situ identification of twin-related bands near yielding in a magnesium alloy. Scripta Mater 68:83. https://doi.org/10.1016/j.scriptamat.2012.09.009
Martin G, Sinclair CW, Schmitt J-H (2013) Plastic strain heterogeneities in an Mg–1Zn–0.5Nd alloy. Scripta Materialia 68:695. https://doi.org/10.1016/j.scriptamat.2013.01.017
Martin G, Sinclair CW, Lebensohn RA (2014) Microscale plastic strain heterogeneity in slip dominated deformation of magnesium alloy containing rare earth. Mater Sci Eng, A 603:37. https://doi.org/10.1016/j.msea.2014.01.102
Sánchez-Martín R, Pérez-Prado MT, Segurado J et al (2014) Measuring the critical resolved shear stresses in Mg alloys by instrumented nanoindentation. Acta Mater 71:283. https://doi.org/10.1016/j.actamat.2014.03.014
Barnett MR, Keshavarz Z, Beer AG, Atwell D (2004) Influence of grain size on the compressive deformation of wrought Mg–3Al–1Zn. Acta Mater 52:5093. https://doi.org/10.1016/j.actamat.2004.07.015
Cepeda-Jiménez CM, Pérez-Prado MT (2016) Microplasticity-based rationalization of the room temperature yield asymmetry in conventional polycrystalline Mg alloys. Acta Mater 108:304. https://doi.org/10.1016/j.actamat.2016.02.023
Cepeda-Jiménez CM, Molina-Aldareguia JM, Pérez-Prado MT (2015) Effect of grain size on slip activity in pure magnesium polycrystals. Acta Mater 84:443. https://doi.org/10.1016/j.actamat.2014.10.001
Wang J, Molina-Aldareguía JM, Llorca J (2020) Effect of Al content on the critical resolved shear stress for twin nucleation and growth in Mg alloys. Acta Mater 188:215. https://doi.org/10.1016/j.actamat.2020.02.006
Guo C, Xin R, Xu J, Song B, Liu Q (2015) Strain compatibility effect on the variant selection of connected twins in magnesium. Mater Des 76:71. https://doi.org/10.1016/j.matdes.2015.03.041
Hong S-G, Park SH, Lee CS (2010) Role of 10–12 twinning characteristics in the deformation behavior of a polycrystalline magnesium alloy. Acta Mater 58:5873. https://doi.org/10.1016/j.actamat.2010.07.002
Song B, Xin R, Liang Y, Chen G, Liu Q (2014) Twinning characteristic and variant selection in compression of a pre-side-rolled Mg alloy sheet. Mater Sci Eng, A 614:106. https://doi.org/10.1016/j.msea.2014.07.026
Yang B, Shi C, Zhang S et al (2021) Quasi-in-situ study on 10–12 twinning-detwinning behavior of rolled Mg-Li alloy in two-step compression (RD)-compression (ND) process. J Magnesium Alloys. https://doi.org/10.1016/j.jma.2021.01.006
Sarker D, Friedman J, Chen DL (2015) De-twinning and Texture Change in an extruded AM30 magnesium alloy during compression along normal direction. J Mater Sci Technol 31:264. https://doi.org/10.1016/j.jmst.2014.11.018
Guan XX, Lu L, Luo SN, Fan D (2021) In situ observations of detwinning and strain localization in pure titanium. Mater Sci Eng, A. https://doi.org/10.1016/j.msea.2021.141073
Zhang J, Xi G, Wan X, Fang C (2017) The dislocation-twin interaction and evolution of twin boundary in AZ31 Mg alloy. Acta Mater 133:208. https://doi.org/10.1016/j.actamat.2017.05.034
Xu J, Guan B, Yu H, Cao X, Xin Y, Liu Q (2016) Effect of twin boundary–dislocation–solute interaction on detwinning in a Mg–3Al–1Zn Alloy. J Mater Sci Technol 32:1239. https://doi.org/10.1016/j.jmst.2016.08.023
Cui Y, Bian H, Li Y, Zhao Y, Aoyagi K, Chiba A (2020) Impacts of pre-strain on twin boundary mobility of magnesium. J Alloy Compd. https://doi.org/10.1016/j.jallcom.2019.152496
Wang Q, Jiang B, Zhao J, Zhang D, Huang G, Pan F (2020) Pre-strain effect on twinning and de-twinning behaviors of Mg-3Li alloy traced by quasi-in-situ EBSD. Mater Sci Eng, A. https://doi.org/10.1016/j.msea.2020.140069
Balogh L, Niezgoda SR, Kanjarla AK et al (2013) Spatially resolved in situ strain measurements from an interior twinned grain in bulk polycrystalline AZ31 alloy. Acta Mater 61:3612. https://doi.org/10.1016/j.actamat.2013.02.048
Mam J (1995) Luster (1995) Compatibility of deformation in two-phase Ti-Al alloys: Dependence on microstructure and orientation relationships. Metall Mater Trans A 26(7):1745–1756
Wang B, Shi J, Ye P et al (2018) In-situ investigation on nucleation and propagation of 10–12 twins during uniaxial multi-pass compression in an extruded AZ31 Mg alloy. Mater Sci Eng, A 731:71. https://doi.org/10.1016/j.msea.2018.06.043
Jonas JJ, Mu S, Al-Samman T, Gottstein G, Jiang L, Martin Ė (2011) The role of strain accommodation during the variant selection of primary twins in magnesium. Acta Mater 59:2046. https://doi.org/10.1016/j.actamat.2010.12.005
Wang S, Zhang Y, Schuman C et al (2015) Study of twinning/detwinning behaviors of Ti by interrupted in situ tensile tests. Acta Mater 82:424. https://doi.org/10.1016/j.actamat.2014.09.038
Wang L, Yang Y, Eisenlohr P, Bieler TR, Crimp MA, Mason DE (2009) Twin nucleation by slip transfer across grain boundaries in commercial purity titanium. Metall and Mater Trans A 41:421. https://doi.org/10.1007/s11661-009-0097-6
Koike J, Sato Y, Ando D (2008) Origin of the anomalous {10\\bar12} twinning during tensile deformation of Mg alloy sheet. Mater Trans 49:2792. https://doi.org/10.2320/matertrans.MRA2008283
Zhao L, Guan B, Xin Y et al (2021) A quantitative study on mechanical behavior of Mg alloys with bimodal texture components. Acta Mater. https://doi.org/10.1016/j.actamat.2021.117013
Chai YQ, Boehlert CJ, Wan YF et al (2021) Anomalous tension twinning activity in extruded Mg sheet during hard-orientation loading at room temperature. Metall Mater Trans A 52:449. https://doi.org/10.1007/s11661-020-06093-5
Dudamell NV, Ulacia I, Gálvez F et al (2011) Twinning and grain subdivision during dynamic deformation of a Mg AZ31 sheet alloy at room temperature. Acta Mater 59:6949. https://doi.org/10.1016/j.actamat.2011.07.047
Jiang S, Jia Y, Wang X (2020) In-situ analysis of slip transfer and heterogeneous deformation in tension of Mg-5.4Gd-1.8Y-1.5Zn alloy. J Magnesium Alloys 8:1186. https://doi.org/10.1016/j.jma.2020.01.002
Han G, Noh Y, Chaudry UM, Park SH, Hamad K, Jun T-S (2022) 10–12 extension twinning activity and compression behavior of pure Mg and Mg-0.5Ca alloy at cryogenic temperature. Mater Sci Eng A. https://doi.org/10.1016/j.msea.2021.142189
Choi S-W, Won JW, Lee S, Hong JK, Choi YS (2018) Deformation twinning activity and twin structure development of pure titanium at cryogenic temperature. Mater Sci Eng, A 738:75. https://doi.org/10.1016/j.msea.2018.09.091
Wang Z, Liu B, Wang F et al (2021) Quasi-in-situ investigation on extension twinning behavior of extruded ZC61 alloy during dynamic compression. Mater Sci Eng, A. https://doi.org/10.1016/j.msea.2021.141992
Sun Q, Zhang XY, Ren Y, Tu J, Liu Q (2014) Interfacial structure of 1 0–1 2 twin tip in deformed magnesium alloy. Scripta Materialia 41:90–91. https://doi.org/10.1016/j.scriptamat.2014.07.012
Sun Q, Zhang X, Shu Y, Tan L, Liu Q (2016) Two types of basal stacking faults within 101¯2 twin in deformed magnesium alloy. Mater Lett 185:355. https://doi.org/10.1016/j.matlet.2016.09.019
Sun Q, Zhang XY, Ren Y, Tan L, Tu J (2015) Observations on the intersection between 1012 twin variants sharing the same zone axis in deformed magnesium alloy. Mater Charact 109:160. https://doi.org/10.1016/j.matchar.2015.09.024
Acknowledgements
This work was supported by High level innovation team of Liaoning Province (No. XLYC1908006), Project of Liaoning Education Department (No. LZGD2020003), Innovative Talents Support Program of Higher Education of Liaoning Province (No. 2020-389), and Liaoning Revitalization Talents Program (No. XLYC1807021 and 1907007).
Author information
Authors and Affiliations
Corresponding authors
Additional information
Handling Editor: Avinash Dongare.
Publisher's Note
Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.
Rights and permissions
Springer Nature or its licensor holds exclusive rights to this article under a publishing agreement with the author(s) or other rightsholder(s); author self-archiving of the accepted manuscript version of this article is solely governed by the terms of such publishing agreement and applicable law.
About this article
Cite this article
Xu, N., Mao, P., Wang, X. et al. Detwinning of AZ31 magnesium alloy during in situ tension. J Mater Sci 57, 15121–15136 (2022). https://doi.org/10.1007/s10853-022-07563-4
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s10853-022-07563-4