Skip to main content

Advertisement

Log in

Fabrication and effect of heat treatment on the microstructure and tribology properties of HVOF-sprayed CoMoCrSi coating

  • Metals & corrosion
  • Published:
Journal of Materials Science Aims and scope Submit manuscript

Abstract

A type of CoMoCrSi coatings were fabricated by using HVOF technique, and the microstructures, mechanical properties and tribological behaviors at room temperature (RT) of the coatings annealed at 800 °C for different time were investigated in detail. Annealed CoMoCrSi coatings exhibited better crystallization and more compact microstructures compared to as-sprayed coatings. The porosity of the annealed coatings reduced to 0.32–0.2%, and adhesive strength increased to 63.8–68.5 MPa, both of that were all reached at an equivalent level with the variation of the annealed time. The surface microhardness could be enhanced from 902.8 HV0.3 for the as-sprayed coating to 1237.6 HV0.3 for the coating annealed for 10 h, which could be attribute to more compact microstructures and hard nano-sized Cr2O3 layer, that resisted indentation effectively. With the increasing of sliding distance at room temperature, the friction coefficients of the annealed coatings reached at 0.39–0.4, and the wear rates decreased to 0.88–1.59 × 10–6 mm3 N−1 m−1, demonstrating enhanced tribological performance of the CoMoCrSi coating after heat treatment. Numerous metallic oxides, i.e., Cr2O3 played a critical role in sustaining and anti-wear, and oxides, i.e., Co3O4, MoO3, and CoMoO4 transferred to the Al2O3 pair surface and formed a continuous transfer film during the friction test at RT, which directly reduced friction and leading to a low friction coefficient and wear rate.

This is a preview of subscription content, log in via an institution to check access.

Access this article

Price excludes VAT (USA)
Tax calculation will be finalised during checkout.

Instant access to the full article PDF.

Figure 1
Figure 2
Figure 3
Figure 4
Figure 5
Figure 6
Figure 7
Figure 8
Figure 9
Figure 10
Figure 11
Figure 12
Figure 13
Figure 14
Figure 15
Figure 16
Figure 17
Figure 18
Figure 19

Similar content being viewed by others

References

  1. Enayati MH, Karimzadeh F, Tavoosi M, Movahedi B, Tahvilian A (2010) Nanocrystalline NiAl coating prepared by HVOF thermal spraying. J Therm Spray Technol 20(3):440–446. https://doi.org/10.1007/s11666-010-9588-7

    Article  CAS  Google Scholar 

  2. Li C, Yang G, Gao P, Ma J, Wang Y, Li C (2007) Characterization of nanostructured WC-Co deposited by cold spraying. J Therm Spray Technol 16(5–6):1011–1020. https://doi.org/10.1007/s11666-007-9096-6

    Article  CAS  Google Scholar 

  3. Cho JY, Zhang SH, Cho TY, Yoon JH, Joo YK, Hur SK (2009) The processing optimization and property evaluations of HVOF Co-base alloy T800 coating. J Mater Sci 44(23):6348–6355. https://doi.org/10.1007/s10853-009-3875-z

    Article  CAS  Google Scholar 

  4. Lin C, Yen S, Su C (2016) Measurement and optimization of atmospheric plasma sprayed CoMoCrSi coatings parameters on Ti-6Al-4V substrates affecting microstructural and properties using hybrid abductor induction mechanism. Measurement 94:157–167. https://doi.org/10.1016/j.measurement.2016.07.077

    Article  Google Scholar 

  5. Yang W, Zou L, Cao X, Liu J, Li D, Cai Z (2019) Fretting wear properties of HVOF-sprayed CoMoCrSi coatings with different spraying parameters. Surf Coat Technol 358:994–1005. https://doi.org/10.1016/j.surfcoat.2018.12.039

    Article  CAS  Google Scholar 

  6. Wang Y, Liu J, Kang N, Darut G, Poirier T, Stella J, Liao H, Planche M-P (2016) Cavitation erosion of plasma-sprayed CoMoCrSi coatings. Tribol Int 102:429–435. https://doi.org/10.1016/j.triboint.2016.06.014

    Article  CAS  Google Scholar 

  7. Guo H, Wang Y, Hao E, Li B, An Y, Chen J, Zhou H, Yan P, Wu Z (2020) CoMoCrSi coatings prepared by high-velocity oxygen fuel spraying: microstructure and mechanical properties at elevated temperatures up to 800 °C. Mater Res Express. https://doi.org/10.1088/2053-1591/ab6374

    Article  Google Scholar 

  8. Nakayama M, Tanaka A, Konishi S, Ogura K (2011) Effects of heat-treatment on the spectroscopic and electrochemical properties of a mixed manganese/vanadium oxide film prepared by electrodeposition. J Mater Res 19(05):1509–1515. https://doi.org/10.1557/jmr.2004.0202

    Article  Google Scholar 

  9. Houdková Š, Smazalová E, Pala Z (2015) Effect of heat treatment on the microstructure and properties of HVOF-sprayed Co-Cr-W coating. J Therm Spray Technol 25(3):546–557. https://doi.org/10.1007/s11666-015-0365-5

    Article  CAS  Google Scholar 

  10. Bolelli G, Lusvarghi L (2006) Tribological properties of HVOF as-sprayed and heat treated Co–Mo–Cr–Si coatings. Tribol Lett 25(1):43–54. https://doi.org/10.1007/s11249-006-9136-2

    Article  CAS  Google Scholar 

  11. Wang Y, Yang Y, Yan MF (2007) Microstructures, hardness and erosion behavior of thermal sprayed and heat treated NiAl coatings with different ceria. Wear 263(1–6):371–378. https://doi.org/10.1016/j.wear.2006.12.003

    Article  CAS  Google Scholar 

  12. Guo H, Li B, Lu C, Zhou Q, Jia J (2019) Effect of WC–Co content on the microstructure and properties of NiCrBSi composite coatings fabricated by supersonic plasma spraying. J Alloy Compd 789:966–975. https://doi.org/10.1016/j.jallcom.2019.02.290

    Article  CAS  Google Scholar 

  13. Guo H, Chen W, Shan Y, Wang W, Zhang Z, Jia J (2015) Microstructures and properties of titanium nitride films prepared by pulsed laser deposition at different substrate temperatures. Appl Surf Sci 357:473–478. https://doi.org/10.1016/j.apsusc.2015.09.061

    Article  CAS  Google Scholar 

  14. Henriques B, Faria S, Soares D, Silva FS (2013) Hot pressing effect on the shear bond strength of dental porcelain to CoCrMoSi alloy substrates with different surface treatments. Mater Sci Eng, C 33(1):557–563. https://doi.org/10.1016/j.msec.2012.10.001

    Article  CAS  Google Scholar 

  15. Bolelli G, Lusvarghi L (2006) Heat treatment effects on the tribological performance of HVOF sprayed Co-Mo-Cr-Si coatings. J Therm Spray Technol 15(4):802–810. https://doi.org/10.1361/105996306x146721

    Article  CAS  Google Scholar 

  16. Wang K, Wang F, Liu Y, Pan G (2013) Vapor growth and photoconductive property of single-crystalline MoO3 nanosheets. Mater Lett 102–103:8–11. https://doi.org/10.1016/j.matlet.2013.03.092

    Article  CAS  Google Scholar 

  17. Sun H, Zhang H, Jing X, Hu J, Shen K, Liang Z, Hu J, Tian Q, Luo M, Zhu Z, Jiang Z, Huang H, Song F (2019) One-step synthesis of centimeter-size alpha-MoO3 with single crystallinity. Appl Surf Sci 476:789–795. https://doi.org/10.1016/j.apsusc.2019.01.169

    Article  CAS  Google Scholar 

  18. Chandoul F, Boukhachem A, Hosni F, Moussa H, Fayache MS, Amlouk M, Schneider R (2018) Change of the properties of nanostructured MoO3 thin films using gamma-ray irradiation. Ceram Int 44(11):12483–12490. https://doi.org/10.1016/j.ceramint.2018.04.040

    Article  CAS  Google Scholar 

  19. Yang T, Zhangluo HY, Mei L, Guo D, Li Q, Wang T (2015) Enhanced electrochemical performance of CoMoO4 nanorods/reduced graphene oxide as anode material for lithium-ion batteries. Electrochim Acta 158:327–332. https://doi.org/10.1016/j.electacta.2015.01.154

    Article  CAS  Google Scholar 

  20. Jiang G, Li L, Huang Z, Xie Z, Cao B (2019) Rod-like porous CoMoO4@C as excellent anode for high performance lithium ion battery. J Alloy Compd 790:891–899. https://doi.org/10.1016/j.jallcom.2019.03.283

    Article  CAS  Google Scholar 

  21. Roy M, Ghosh S, Naskar MK (2015) Solvothermal synthesis of Cr2O3 nanocubes via template-free route. Mater Chem Phys 159:101–106. https://doi.org/10.1016/j.matchemphys.2015.03.058

    Article  CAS  Google Scholar 

  22. Fleischer K, Caffrey D, Farrell L, Norton E, Mullarkey D, Arca E, Shvets IV (2015) Raman spectra of p-type transparent semiconducting Cr2O3:Mg. Thin Solid Films 594:245–249. https://doi.org/10.1016/j.tsf.2015.03.076

    Article  CAS  Google Scholar 

  23. Olejníček J, Šmíd J, Perekrestov R, Kšírová P, Rathouský J, Kohout M, Dvořáková M, Kment Š, Jurek K, Čada M, Hubička Z (2019) Co3O4 thin films prepared by hollow cathode discharge. Surf Coat Technol 366:303–310. https://doi.org/10.1016/j.surfcoat.2019.03.010

    Article  CAS  Google Scholar 

  24. Hadjiev VG, Vergilov IV (1988) The raman spectra of Co3O4. J Phys C: Solid State Phys 21:L199–L201

    Article  Google Scholar 

  25. Salehi Doolabi D, Rahimipour MR, Alizadeh M, Pouladi S, Hadavi SMM, Vaezi MR (2017) Effect of high vacuum heat treatment on microstructure and cyclic oxidation resistance of HVOF-CoNiCrAlY coatings. Vacuum 135:22–33. https://doi.org/10.1016/j.vacuum.2016.10.014

    Article  CAS  Google Scholar 

  26. Chen L-Y, Xu T, Lu S, Wang Z-X, Chen S, Zhang L-C (2018) Improved hardness and wear resistance of plasma sprayed nanostructured NiCrBSi coating via short-time heat treatment. Surf Coat Technol 350:436–444. https://doi.org/10.1016/j.surfcoat.2018.07.037

    Article  CAS  Google Scholar 

  27. Liu L, Xu H, Xiao J, Wei X, Zhang G, Zhang C (2017) Effect of heat treatment on structure and property evolutions of atmospheric plasma sprayed NiCrBSi coatings. Surf Coat Technol 325:548–554. https://doi.org/10.1016/j.surfcoat.2017.07.011

    Article  CAS  Google Scholar 

  28. Tang L, He P, Kang J, Wang L, Ding S, Chen S, Zhu X, Xie F, Zhou L, Ma G, Wang H (2020) Significantly enhanced mechanical and tribological properties of Co-based alloy coatings by annealing treatment. Tribol Int. https://doi.org/10.1016/j.triboint.2020.106265

    Article  Google Scholar 

Download references

Acknowledgements

The authors gratefully acknowledge the National Natural Science Foundation of China (Grant Nos. 51665026, 51771214), China Postdoctoral Science Foundation (Grant No. 2019M663851), Outstanding Youth Foundation of Gansu Province (Grant No. 20JR5RA212), "Light of West China" talent program and Youth Innovation Promotion Association (No. 2014378) of Chinese Academy of Sciences for their financial support. The authors also appreciate the constructive comments from the reviewers.

Author information

Authors and Affiliations

Authors

Corresponding authors

Correspondence to Yulong An or Jianmin Chen.

Additional information

Handling Editor: David Balloy.

Publisher's Note

Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.

Rights and permissions

Reprints and permissions

About this article

Check for updates. Verify currency and authenticity via CrossMark

Cite this article

Guo, H., Zhao, X., An, Y. et al. Fabrication and effect of heat treatment on the microstructure and tribology properties of HVOF-sprayed CoMoCrSi coating. J Mater Sci 56, 12423–12437 (2021). https://doi.org/10.1007/s10853-021-05986-z

Download citation

  • Received:

  • Accepted:

  • Published:

  • Issue Date:

  • DOI: https://doi.org/10.1007/s10853-021-05986-z

Navigation