Skip to main content
Log in

High temperature infiltration at low overpressures: Darcy’s law, the slug-flow hypothesis and percolation

  • Original Paper
  • Published:
Journal of Materials Science Aims and scope Submit manuscript

Abstract

Experiments on liquid metal infiltration into porous preforms at low overpressures give a linear relationship between the square of the infiltrated height and the applied over-pressure. This result can be derived from Darcy’s law under the Slug Flow Hypothesis SFH. Two features characterize SFH: (i) a step-like drainage curve, i.e., homogeneous, not necessarily full, filling of the empty space, and (ii) a linear drop of pressure through the infiltrated sample. However, experimental data do also indicate that, in most cases, (i) is not fulfilled. In this work, going beyond SFH, we utilize several combinations of drainage curve (Brooks and Corey, Van Genuchten and percolation) and permeability (Mualem, Burdine and a power law) to investigate whether the linear relationship may show up even though the SFH is not fulfilled. We show that, at low over-pressures, the integro-differential equation which describes this system admits a power law solution whose exponent and constant can be analytically related to the model parameters. This allows to predict that all combinations, except those including Burdine permeability, reproduce that linear relationship. In addition, the remaining six give a proportionality coefficient \(\ge \)1 as in SFH, actually is equal to 1 only for full filling (in the case of Mualem the coefficient of the drainage curve has to be \(\le \)1). However, only the two combinations based upon Percolation have a drainage curve with an exponent that can be less than 1, in agreement with recent experimental studies. Finally, albeit the drainage curve is not a step function, pressure approximately varies linearly throughout the infiltrated sample. The present analysis and methodology may be of help in a variety of fields such as soil science, oil extraction, hydrology, geophysics, metallurgy, etc.

This is a preview of subscription content, log in via an institution to check access.

Access this article

Price excludes VAT (USA)
Tax calculation will be finalised during checkout.

Instant access to the full article PDF.

Fig. 1
Fig. 2
Fig. 3
Fig. 4
Fig. 5
Fig. 6
Fig. 7

Similar content being viewed by others

References

  1. Oh S-Y, Cornie JA, Russell KC (1989) Wetting of ceramic particulates with liquid aluminium alloys. 1. Experimental-techniques. Metall Trans A 20A:527–532

    Article  Google Scholar 

  2. Oh S-Y, Cornie JA, Russell KC (1989) Wetting of ceramic particulates with liquid aluminium alloys. 2. Study of wettability. Metall Trans A 20A:533–541

    Article  Google Scholar 

  3. Mortensen A, Wong T (1990) Infiltration of fibrous preforms by a pure metal: part III. Capillary phenomena. Metall Trans A 21A:2257–2263

    Article  Google Scholar 

  4. Alonso A, Pamies A, Narciso J, García-Cordovilla C, Louis E (1993) Evaluation of the wettability of liquid Aluminum with ceramic particulates (SiC, TiC, Al\(_2\)O\(_3\)) by means of pressure infiltration. Metall Trans A 24A:1423–1432

    Article  Google Scholar 

  5. Candan E, Atkinson HV, Jones H (1997) Effect of alloying additions on threshold pressure for infiltration and porosity of aluminium-based melt infiltrated silicon carbide powder compacts. Key Eng Mater 127:463–470

    Article  Google Scholar 

  6. Candan E, Atkinson HV, Jones H (1997) Effect of magnesium alloying additions on infiltration threshold pressure and structure of SiC powder compacts infiltrated by aluminium-based melts. J Mater Sci 32:289–294. doi:10.1023/A:1018580711652

    Article  Google Scholar 

  7. García-Cordovilla C, Louis E, Narciso J (1999) Pressure infiltration of packed ceramic particulates by liquid metals. J Acta Mater 47:4461

    Article  Google Scholar 

  8. Molina JM, Pinero E, Narciso J, García-Cordovilla C, Louis E (2005) Liquid metal infiltration into ceramic particle preforms with bimodal size distributions. Curr Opin Solid State Mater 9:202–210

    Article  Google Scholar 

  9. Rodríguez-Guerrero A, Sánchez SA, Narciso J, Louis E, Rodríguez-Reinoso F (2006) Pressure infiltration of Al12 wt% SiX (X = Cu, Ti, Mg) alloys into graphite particle preforms. Acta Mater 54:1821–1831

    Article  Google Scholar 

  10. Fletcher TR, Cornie JA, Russell KC (1988). In: Fishman SG, Dhingra AK (eds) Cast reinforced metal composites, ASM International, p. 21

  11. Molina JM, Narciso J, Louis E (2010) On the triple line in infiltration of liquid metals into porous preforms. Scr Mater 62:961–965

    Article  Google Scholar 

  12. Michaud V, Mortensen A (2001) Infiltration processing of fibre reinforced composites: governing phenomena. Compos A 32:981–996

    Article  Google Scholar 

  13. Michaud V, Mortensen A (2007) On measuring wettability in infiltration processing. Scr Mater 56:859–862

    Article  Google Scholar 

  14. Molina JM (2004) Aspectos básicos de la fabricación de materiales compuestos Al/SiCp y Al-Si/SiCp para electrónica y automoción. PhD thesis, Universidad de Alicante

  15. Molina JM, Rodríguez-Guerrero A, Bahraini M, Weber L, Narciso J, Rodríguez-Reinoso F, Louis E, Mortensen A (2007) Infiltration of graphite preforms with Al–Si eutectic alloy and mercury. Scr Mater 56:991–994

    Article  Google Scholar 

  16. Mortensen A, Masur L, Cornie J, Flemings M (1989) Infiltration of fibrous preforms by a pure metal: part I theory. Metall Trans A 20A:2535–2547

    Article  Google Scholar 

  17. Dopler T, Modaressi A, Michaud V (2000) Simulation of metal composite isothermal infiltration processing. Metall Trans A 31A:225–233

    Article  Google Scholar 

  18. Brooks RH, Corey AT (1964) Hydraulic properties of porous media, vol 3. Colorado State University Hydrology Papers, p 27

  19. Van Genuchten MT (1980) A closed-form equation for predicting the hydraulic conductivity of unsaturated soils. Soil Sci Soc Am J 44:892

    Article  Google Scholar 

  20. Morel-Seytoux HJ, Meyer PD, Nachabe M, Touma J, van Genuchten M (1996) Parameter equivalence for the Brooks–Corey and van Genuchten soil characteristics: preserving the effective capillary drive. Water Resour Res 32:1251–1258

    Article  Google Scholar 

  21. Hunt AG (2004) Comparing van Genuchten and percolation theoretical formulations of the hydraulic properties of unsaturated media. Vadose Zone J 3:1483–1488

    Article  Google Scholar 

  22. Feder J (1988) Fractals. Plenum Press, New York

    Book  Google Scholar 

  23. Sahimi M (1993) Flow phenomena in rocks: from continuum models to fractals, percolation, cellular automata, and simulated annealing. Rev Mod Phys 65:1393

    Article  Google Scholar 

  24. Martys N, Cieplak M, Robbins MO (1991) Critical phenomena in fluid invasion of porous media. Phys Rev Lett 66:1058–1061

    Article  Google Scholar 

  25. Dullien FAL (1979) Porous media, fluid transport and pore structure. Academic Press, London

    Google Scholar 

  26. García-Cordovilla C, Goicoechea J, Louis E, Pamies A (1993). In Peteves SD (ed) Designing ceramic interfaces. Commission of the European Communities, p 429

  27. Léger A, Molina-Jordá JM, Weber L, Mortensen (2014) Percolation and universality in the processing of composite materials (in press)

  28. Burdine N (1953) Relative permeability calculation, size distribution data. Trans AIME 198:71–77

    Google Scholar 

  29. Mualem Y (1976) A new model for predicting the hydraulic conductivity of unsaturated porous media. Water Resour Res 12:513

    Article  Google Scholar 

  30. Li K (2004) Generalized capillary pressure and relative permeability model inferred from fractal characterization of porous media. SPE annual technical conference and exhibition, Houston, Texas, USA, 26–29 September 2004

  31. Kozeny J (1927) U ber Kapillare Leitung des Wassers im Boden. Sitzung-sber. Akad Wiss Wien 136:271

    Google Scholar 

  32. Landau LD, Lifshitz EM (1987) Fluid mechanics. Pergamon Press, New York

    Google Scholar 

  33. Press WH, Teulovsky SA, Vetterling WT, Flannery BP (2001) Fortran numerical recipes, vols 1 and 2. Cambridge University Press, Cambridge

    Google Scholar 

Download references

Acknowledgements

This work has been partially supported by the Spanish MEC (MAT2011-25029 and AYA2013-42184P).

Author information

Authors and Affiliations

Authors

Corresponding author

Correspondence to E. Louis.

Rights and permissions

Reprints and permissions

About this article

Check for updates. Verify currency and authenticity via CrossMark

Cite this article

Louis, E., Miralles, J.A. & Molina, J.M. High temperature infiltration at low overpressures: Darcy’s law, the slug-flow hypothesis and percolation. J Mater Sci 50, 1655–1665 (2015). https://doi.org/10.1007/s10853-014-8726-x

Download citation

  • Received:

  • Accepted:

  • Published:

  • Issue Date:

  • DOI: https://doi.org/10.1007/s10853-014-8726-x

Keywords

Navigation