Abstract
Schiff base imine condensations are a useful tool for macrocycle synthesis and applications within supramolecular chemistry. Here we address the mixtures of products that can arise from template free synthesis using dicarbonylheterocycles and diamines, and look to develop metal-free template methods for selective macrocycle formation. A range of alkyl α,ω-diamines were combined with phenanthroline and pyridine heterocyclic dicarbaldehydes under standard literature conditions. The reaction conditions were modified to demonstrate a relationship between choice of solvent and product equilibria. It was observed that benzene and toluene could shift a mixture of products and unreacted starting materials to form predominantly one imine product for a number of systems. Once the macrocyclic products had been characterized in selected solvents, iodinated halogen bonding guest molecules were added to direct macrocycle assemblies using non-covalent interactions. Studies to investigate host – guest suitability and halogen bond interactions were conducted, and it was found that tetraiodoethylene had an influence on the formation of a phenanthroline based macrocycle. Proof of concept experiments were performed to show the influence of the guest molecule, tetraiodoethylene, on the macrocyclic products formed under competitive dynamic combinatorial chemistry conditions.
Similar content being viewed by others
![](https://media.springernature.com/w215h120/springer-static/image/art%3A10.1038%2Fs42004-021-00455-9/MediaObjects/42004_2021_455_Fig1_HTML.png)
Avoid common mistakes on your manuscript.
Introduction
Schiff base imine formation has been used for the preparation of macrocycles as a comparatively mild, facile, and simple procedure relative to other ring closing reactions, such as the Mukaiyama method [1], the Corey method [2], or Mitsunobu reactions [3]. The reversible imine bond has been further employed in the field of macrocyclic chemistry because it allows for investigation into templating, self-sorting, and dynamic covalent chemistry [4]. The majority of Schiff base macrocycle reactions use α,ω-diamines, with aliphatic linear diamines being particularly reactive towards imine formation because the amine groups can react separately. Despite being readily accessible, macrocycle synthesis is impeded by the formation of mixed products, oligomeric and polymeric products, or larger ring condensations (Fig. 1). Other studies have shown that although the [2+2] macrocycle is often the stated major product, [3 +3] and [4+4] condensation products are also common under template free synthesis conditions [5]. Without a template, the reactions typically produce oligomeric condensation products [6]. Often the [2+2] condensation product is the target molecule because of its symmetrical structure, size, and functionalisation. To afford this product, reaction conditions are modified by manipulating reactant concentrations, choice of solvents, and relative stoichiometric ratios to increase regioselectivity [7, 8]. The solvent must be polar enough to the dissolve the starting materials (which are typically more polar than the desired product), and for this reason, acetonitrile, methanol or ethanol are common choices [9]. The reaction is usually stirred for at least 12 h at room temperature until a precipitate is formed. Stoichiometric ratios and high dilutions (≤10−3 M) are typically employed to reduce the intermolecular reactions that lead to oligomeric products [10,11,12]. The dynamic and reversible nature of the imine bond means that even if the precipitate is the desired [2+2] macrocycle product initially, it can readily change once redissolved [13]. The reaction is so robust that the combination of aldehyde and amine can be mechanically ground in solvent free conditions and still produce an imine, yet the presence of additional water can quickly reverse the reaction [14].
Templation is a common technique used in macrocycle assembly. Typically, a metal cation is used to direct a particular size, arrangement, conformation, or geometry of the macrocycle [15,16,17,18]. The objective of the synthesis will determine if the template must be removed at a later stage. There has been interest in developing a metal-free template synthesis for Schiff base macrocycles. Although the literature methods suggest the formation of the [2+2] macrocycle is readily achievable, mixed and larger condensations are often reported, and additional purification can be difficult or time consuming [5, 19]. Other works have looked to overcome the need for cation templation, and instead used hydrogen bonding interactions to direct macrocycle assembly [20]. Non-covalent templation can be solely for the purpose of selective macrocycle assembly, but it also has direct applications within self-sorting and dynamic combinatorial libraries [7].
The manipulation and fine tuning of experimental conditions to control macrocyclic products has been explored in detail [21], and has provided insight into alternative methods for macrocycle templation. Prior studies have been able to demonstrate the impact of solvent selection on the size and conformations of Schiff base macrocycles [22, 23]. It has been shown that a co-solvent can control Schiff base macrocycles, converting a [2+2] macrocycle to [1+1] macrocycle when methanol is substituted with a mixed methanol – water solvent system [23].
The addition of metal cations is often used to direct macrocycle formation, and it has been observed that the choice of metal and stoichiometry can be used to control macrocycle size [24]. A sandwich conformation of a previously flat octaaza Schiff base macrocycle was induced by forming the barium(II) complex [15]. In other studies, a covalent bonding template molecule has been shown to transform a mixture of imine products to a single macrocycle product [25].
The primary aim of our investigation was to control Schiff base macrocycle assembly using a halogen bond template molecule as an alternative to metal templation. During this investigation, it was observed that macrocycles could be selectively synthesized under two different methods of metal-free templation: the choice of solvent in which the dicarbaldehyde and diamine were combined; or through the addition of halogen bonding guest molecules that shifted macrocycle product distribution through non-covalent intermolecular interactions.
Results and discussion
Synthesis of Schiff base macrocycles
In this work we attempted to assemble a library of different sized macrocycles from 2,6-pyridinedicarboxaldehyde and 1,10-phenanthroline-2,9-dicarbaldehyde with different alkyl chain length α,ω-diamines (Fig. 2). The macrocycles 1c and 2c were initially synthesized according to the literature procedures for the condensation of 2,6-pyridinedicarbaldehyde or 1,10-phenanthroline-2,9-dicarbaldehyde and 1,4-diaminobutane [10, 26]. When analysed by 1H NMR spectroscopy in deuterated chloroform (CDCl3), mixtures of products were observed. The desired [2+2] macrocycle resonances were identified by comparison to those reported in the literature, but there was also a mixture of other macrocyclic products and starting materials present. Multiple synthesis attempts with modifications to concentrations, time and stoichiometry had no significant impact on the distribution of the observed products. Although this outcome differed to that reported in the literature synthesis, similar synthetic procedures when analysed by MALDI-TOF mass spectrometry have shown that many different sized macrocycles are present, ranging from [1 + 1] to [7 + 7] condensation products [22]. There are three types of diamines: aliphatic being the most flexible and nucleophilic; cycloaliphatic being nucleophilic but rigid; and aromatic, being rigid but less nucleophilic. The product outcome of Schiff base macrocycle formation can be unpredictable and is thought to be highly dependent on the nature of the diamine [22]. For example, the condensation of 2,6-diformylanisoles with N'-(2-aminoethyl)ethane-1,2-diamine was reported to give [2+2] Schiff-base macrocycles in 65–80% yield, [27] while diformyl derivatives combined with 1,4-di(amino methyl)benzene produced only 33% of the [2+2] Schiff-base macrocycle [28].
The azeotropic distillation of toluene
The condensation of an amine and an aldehyde produces an equivalent of water, and it is known that the presence of water can impact the equilibrium of the Schiff base reaction [29], and influence the product outcomes [23, 30]. The role of water in imine synthesis can vary greatly; in the aforementioned study [23], water was used as a co-solvent to manipulate macrocycle condensation, while other claims regarding imines formed in aqueous solution were later revealed to involve imine formation during isolation and analysis [13, 23].
Our reaction procedure was modified to use a Dean Stark apparatus with toluene as a solvent. The azeotropic distillation of toluene allowed for the removal of water as the imine formation progressed. The attempted 1c macrocycle synthesis performed in the Dean Stark apparatus combined 2,6-pyridinedicarboxaldehyde and 1,4-diaminobutane in toluene, heating the mixture at reflux until the formation of water ceased. Later experiments showed higher yields of isolated macrocycles when the solution was stirred before heating, possibly due to the system reaching equilibrium prior to the removal of water [31]. The macrocycles of interest were partially soluble in toluene, and the solvent was removed using rotary evaporation to isolate the product as a yellow solid in 78% yield. The crude reaction product isolated from the Dean Stark apparatus was found to be a single macrocyclic product by 1H NMR spectroscopy in CDCl3, showing a characteristic singlet imine resonance at 8.39 ppm (N = C-H), a doublet at 7.96 ppm (ar) and a triplet at 7.75 ppm (ar), comparable to literature values [26], and residual toluene resonances from the reaction procedure (7.26–7.14, 2.32 ppm). The product was dried under vacuum and a second 1H NMR spectrum was collected, indicating a mixture of products similar to those found for our synthesis attempted following the original literature method using methanol [10, 26]. The difference between the two samples was the presence of residual toluene. It was hypothesized that the presence of residual toluene may have influenced the product equilibrium. The templation effect of toluene has previously been shown to selectively assemble macrocycles as nanocages [32]. Whilst it was thought the toluene may be having a favourable impact on the product equilibrium, it was also considered that other conditions could be having an adverse effect on product equilibria. For example, the chloroform-d NMR solvent could be potentially impacting the observed product distribution [33, 34]. The literature has many examples of solvent impacting the outcome of macrocyclizations and imine formation [7, 35,36,37]. To probe this idea, small scale macrocycle syntheses of 1c were performed in a range of deuterated solvents. Stoichiometric amounts of 2,6-pyridinedicarbaldehyde and 1,4-diaminobutane were combined in acetone-d6, acetonitrile-d3, methanol-d4, pyridine-d5, dimethyl sulfoxide-d6, toluene-d8, benzene-d6 and chloroform-d. Comparison of the 1H NMR spectra obtained showed a mixture of products or incomplete reaction mixtures observed in all solvents except benzene-d6, which produced a majority product (Fig. 3—some solvents were not included due to precipitation). Notably, at these concentrations the macrocycle 1c was only moderately soluble in toluene, which made benzene the preferable solvent choice for later experiments. Observationally, toluene is providing a similar influence as benzene, but the precipitation from solution may be amplifying the relative proportions of the starting material resonances relative to the imine product. This could make toluene a desirable solvent choice for synthetic methods where products are collected by precipitation.
Macrocycle equilibria under solvent control
The observed solvent influence was further tested by performing a 1H NMR titration in which a solution of macrocycle 1c in benzene-d6 was monitored during the addition of aliquots of chloroform-d. Each 1H NMR spectra collected showed the slowly increasing presence of chloroform-d had a minimal impact on macrocycle composition for the first 40 μL added. The final 60 μL additions showed a transition to more products, observable by the formation of multiple imine resonances.
To test the applicability of this solvent effect on other systems, reactions between 2,6-pyridinedicarbaldehyde and α,ω-diamines were conducted and analysed in chloroform-d and benzene-d6. 2,6-Pyridinedicarbaldehyde (1 equivalent) was dissolved in hot methanol (0.40 mL/mol) and the solution was cooled to room temperature. This solution was added dropwise to a solution of diamine (1 equivalent) in methanol (1.5 mL/mol) at ~ 0.40 mL/minute. The reaction mixture was stirred overnight, and a precipitate formed. The precipitate was collected on a glass frit and was washed with additional cold methanol, and thoroughly dried before being dissolved in the deuterated solvents. The diamines chosen ranged in size from 1,3-diaminopropane to 1,12-diaminododecane (Fig. 2). Macrocycles 1b, 1d, 1e, 1f and 1g behaved similarly; when analysed in chloroform-d they presented a mixture of macrocycle products and residual starting materials. The same macrocycles (1b, 1d, 1e, 1f, 1g) concurrently analysed using benzene-d6 showed a majority of imine product (Fig. 4; macrocycle 1e, spectra a and b). Notably, the largest macrocycle 1h, showed a mixture of starting materials and multiple imine products when analysed in chloroform-d, but two distinct sets of imine resonances when analysed in benzene-d6. Given the flexibility and potentially unfavourable kinetics of large condensation products for the 1,12-diamine, we postulate that these were the [1+1] and [2+2] macrocycles (Fig. 5). Molecules containing imines are highly responsive to reaction conditions, and in our hands, benzene was the most useful solvent for a dynamic sorting study. Toluene provided similar effects but had lower solubility limits for the larger macrocycles, making it less effective for the purpose of comparative experiments and NMR spectroscopic analysis.
Halogen bond directed macrocycle formation
In addition to solvent control, intermolecular non-covalent interactions with guest molecules can also act to template target macrocycles. Directional non-covalent bonds are a valuable tool in supramolecular chemistry, with hydrogen bonding being commonly used. Halogen bonds are similar to hydrogen bonds, and although often not as strong, the hydrophobicity of the halogen bond can facilitate non-covalent interactions in polar or aqueous media [38,39,40]. A halogen bond occurs between a positively polarized halogen donor atom and an acceptor atom in a colinear fashion, and is characterized by an interaction length less than the sum of the van der Waals radii and at an angle approximating 180°. The N-heterocycles chosen for this work are strong halogen bond acceptors [41]. The guest molecule primarily used in this work was tetraiodoethylene, which was chosen for its rectangular size and multiple halogen bond donor sites. Other iodinated guest molecules were also considered, specifically 1,4-diiodotetrafluorobenzene and diiodoacetylene. Iodinated molecules were chosen because iodine typically forms the strongest halogen bonding interactions, and 1,4-diiodotetrafluorobenzene was specifically chosen because the electron withdrawal from fluorine can facilitate halogen bonding whilst also providing a secondary NMR spectroscopic handle [42, 43].
Diiodoacetylene is considered hazardous because it can explosively decompose. Due to the potential risks of experimenting with diiodoacetylene, tetraiodoethylene was used as a proxy [44]. We wanted to consider both the potential for halogen bonding to induce macrocycle assembly by templation, and for pre-organized macrocycles to bind guest molecules through halogen bonding. Host – guest complex formation can sometimes stabilize or prevent decomposition [45], giving rise to the suggestion that diiodoacetylene could be a stabilized as a guest with a suitable host.
Crystallographic implications for host – guest matching
Preliminary host – guest matching was probed by cocrystallizing tetraiodoethylene with 2,9-dimethyl-1,10-phenanthroline. The assembly crystallized in the triclinic space group P-1, with the asymmetric unit containing one 2,9-dimethyl-1,10-phenanthroline and half of the tetraiodoethylene molecule, related around the crystallographic inversion centre (Fig. 6). Halogen bonds are the primary intermolecular feature of the structure. One iodine of the tetraiodoethylene interacts with the phenanthroline nitrogen atoms through a bifurcated halogen bond at distances of 3.2147(2) and 3.2178(3) Å. The iodine atom is 2.9098(2) Å from a centroid between the two nitrogen atoms, with a C–I···N centroid angle of 166.006(2)º). The second iodine atom forms a halogen bond to one of the two nitrogen atoms of a symmetry related phenanthroline at a distance of 3.1855(2) Å (ca. 90% of the sum of the van der Waals radii) and with a C–I···N angle of 161.385(2)º. Figure 6 also illustrates the potential for a bis(1,10-pheanthroline) macrocycle to encapsulate a halogen bonding guest, if the methyl groups were tethered together through an appropriately sized linker. The Cambridge Crystallographic Database was examined to establish a range of relevant distances and angles suitable for macrocyclic host – tetraiodoethylene guest adduct formation [46]. The crystallographic database was used to identify bifurcated halogen bonds between phenanthroline and carbon-bound iodine. These interactions were examined from the centroid between the two nitrogen atoms and an iodine atom. These database results were used to calculate an average I – bifurcated N-centroid distance of 2.86 Å, and an average tetraiodoethylene C – I bond length of 2.12 Å.
Tetraiodoethylene has the potential to form four halogen bonding interactions through the four iodine atoms, which may suggest it could bind to a macrocyclic guest through cis, trans or gem interactions. An interrogation of the Cambridge Crystallographic Database reveals that most crystal structures of tetraiodoethylene feature four halogen bonding interactions. Based on the determined bond parameters, the cis, trans and gem arrangements of iodine atoms would allow for a nitrogen centroid distance to nitrogen centroid distances of 6.82, 8.32 and 10.74 Å respectively (Fig. 7).
The potential nitrogen-centroid spacing for halogen bonding to tetraiodoethylene was determined from crystal structures of halogen bonding phenanthroline cocrystals, and tetraiodoethylene cocrystals. Trigonometry was applied to the average bond lengths and angles to determine approximate nitrogen centroid—nitrogen centroid distances
When the dataset is limited to interactions with two nitrogen halogen bond acceptors, the general trend is that the halogen bonds to nitrogen occur in a trans arrangement, with the remaining interactions to neighbouring iodides, and to arene \(\pi\) systems. The size of the macrocycle cavity can only be estimated due to potentially varied conformations of the alkyl chain diamines. To illustrate, the macrocycle 2c was prepared and recrystallized from methanol. The crystal structure of 2c reveals a partially folded, hyperbolic paraboloid-like conformation which suggests a N-centroid to N-centroid cavity length of ~ 6.94(2) Å (Fig. 8). The packing diagram for the crystal structure of 2c shows a stack of saddle-like molecules along the b axis, reminiscent of the packing in a tube of Pringles®. Our attempts at cocrystallizing 2c and tetraiodoethylene from a range of polar and non-polar solvents failed to give a cocrystal, prompting further solution phase experiments.
Tetraiodoethylene guest and template effects in solution
To understand the interactions of tetraiodoethylene and macrocycle 2c in solution, a 1H NMR spectroscopy titration experiment was conducted, by monitoring the resonances of the preformed 2c macrocycle (prepared and isolated from methanol) upon addition of aliquots of tetraiodoethylene. From a stock solution of macrocycle 2c (9.1 × 10–4 M) in benzene-d6, a 400 μL sample was prepared. As previously observed for macrocycle 2c prepared in methanol, the initial 1H NMR spectrum showed two sets of macrocycle resonances (Fig. 9a). To this sample, 0.5 molar equivalents of tetraiodoethylene were added in aliquots, and the mixture analysed by 1H NMR spectroscopy.
The 1H NMR spectra collected from a tetraiodoethylene titration in benzene-d6. Spectrum a shows the composition of products prior to guest addition. Spectra b and c show the changes observed when a total of 0.5 and 2.5 equivalents of tetraiodoethylene have been added. The plot shows the change in the relative intensity of the second imine peak in response to guest addition
The addition of tetraiodoethylene caused the relative proportions of the imine resonance at 8.98 ppm to decrease as the 9.02 ppm imine resonance increased, suggesting a shift in the product equilibrium (Fig. 9d). Another four equivalents of tetraiodoethylene were added, further changing the observed resonances. At these concentrations, no precipitation was observed. The sample was analysed 24 h later to check for changes to the product equilibrium, but there was no further change once the final addition of tetraiodoethylene had been made. Notably, the addition of tetraiodoethylene to macrocycle 2c changes the physicochemical properties of the system. When tetraiodoethylene is combined with macrocycle 2c in benzene at concentrations above approximately 10–3 M, a precipitate is formed. Characterisation of the precipitate by 1H NMR spectroscopy showed a single set of resonances as expected for macrocycle 2c. The presence of the guest in the solid sample was supported by ATR infrared spectroscopy (ν = 1495.85 cm−1, C = C). Prior to guest addition, macrocycle 2c had been readily soluble in benzene. If these changes in physical properties are due to guest binding it was considered this concept could be used to encapsulate and stabilize volatile guest molecules [47]. For example, the previously mentioned diiodoacetylene is a volatile and toxic molecule despite being the most stable of the dihaloalkynes [48]. Diiodoacetylene has similar physical properties to tetraiodoethylene and is geometrically more accessible for binding, but was not tested due to the noted experimental risks [49, 50].
Photochemical stabilization
It was observed that iodinated guest molecules in solution tended to decompose when exposed to sunlight. Decomposition was indicated by the development of colour from elemental iodine in solution. The presence of iodine is known to promote the decomposition of imines [29, 51] When various macrocycle samples were combined with an iodinated guest molecule and exposed to light, the solution became orange or purple in colour (depending on the solvent and concentration of the iodinated guest molecule), and 1H NMR spectroscopic analysis showed an absence of imine resonances. On occasion, it was noted that particular samples did not undergo visible decomposition despite containing an iodinated guest molecule and being exposed to sunlight. Experiments were conducted in which macrocycle 1c and macrocycle 2c were assembled in heated methanol prior to the addition of tetraiodoethylene. Both samples showed macrocyclic products and an absence of starting material immediately after analysis in benzene-d6. These solutions were exposed to natural light over the course of one day. The volatile components were removed using rotary evaporation and the solid remaining was dissolved in benzene-d6 for 1H NMR spectroscopic analysis. Macrocycle 1c and guest sample (8) underwent decomposition after extended exposure to natural light whilst macrocycle 2c and guest sample (7) did not (Fig. 10 and Table 1). This may be due to the fluxionality, or the lack of host – guest compatibility in macrocycle 1c. The samples were left in natural light for multiple days, and the combined macrocycle 2c and tetraiodoethylene sample did not undergo decomposition. This experiment suggested the combination of a macrocycle and guest molecule could result in a protective or stabilizing effect, but also demonstrated that the in-situ formation of a macrocycle in the presence of tetraiodoethylene had an influence on the phenanthroline-based system, but no discernible effect on the pyridine-based system. Comparison with a sample containing 1,10-phenanthroline-2,9-dicarbaldehyde (Sample 2) suggests that the effect is greater than the presence of a phenanthroline chromophore alone.
Photodecomposition experiment results as described in Table 1; Solutions of macrocycles (0.001 M) that were prepared in heated methanol, were combined with tetraiodoethylene in a 1:1 molar ratio
Competitive macrocycle formation in the presence of a halogen bonding guest
Tetraiodoethylene was considered a potential template molecule for the demonstration of self-sorting under dynamic combinatorial conditions. The ability of tetraiodoethylene to influence the product equilibrium of a reaction mixture was undertaken with a mixture containing two dicarbaldehydes and one diamine. The experiment was designed so the excess of dicarbaldehyde could be used as a 1H NMR spectroscopic handle to observe changes in relative product composition. A solution of 1,10-phenanthroline-2,9-dicarbaldehyde (1 equivalent), 2,6-pyridinedicarboxaldehyde (1 equivalent), and 1,4-diaminobutane (1 equivalent) in methanol was stirred for 48 h. This formed a mixture of products, with the 1H NMR spectrum showing at least 4 imine resonances and remaining free dicarbaldehyde resonances. An aliquot was removed and combined with one molar equivalent of tetraiodoethylene, and stirred for an additional hour. The range of mixed condensation products resulted in an overlapping of the resonances in the imine region, whilst the dicarbaldehyde resonances could be easily identified and integrated to monitor changes in their relative proportions.
The 1H NMR spectrum of the solution without tetraiodoethylene showed 2,6-pyridinedicarboxaldehyde and 1,10-phenanthroline-2,9-dicarbaldehyde at a 1:1.9 ratio, indicating preferential formation of imines containing 2,6-pyridinedicarbaldehyde. The aliquot that was combined with tetraiodoethylene indicated a change in the relative integrations of dicarbaldehyde peaks. The integration showed that 2,6-pyridinedicarboxaldehyde and 1,10-phenanthroline-2,9-dicarbaldehyde were present in a 1:1.4 ratio, indicating that in the presence of tetraiodoethylene, there is less 1,10-phenanthroline-2,9-dicarbaldehyde remaining in solution. This suggests that 1,10-phenanthroline-2,9-dicarbaldehyde had been incorporated into imine products when tetraiodoethylene was present.
Conclusions
The choice of solvent and the presence of a halogen bonding guest have been shown to influence the formation of Schiff base macrocycles. The aromatic solvents toluene and benzene were observed to give primarily [2+2] macrocycles with a range of alkyl α,ω-diamines, which were obtained as mixed products from other solvents. This solvent effect on macrocycle equilibrium highlights the importance of solvent choice when isolated Schiff base macrocycles are used in subsequent reactions, such as metal complexation. The halogen bonding guest tetraiodoethylene was observed to influence the product equilibria in the formation of Schiff base macrocycles from phenanthroline dicarbaldehydes with alkyl α,ω-diamines. The formation of a host–guest adduct was investigated, and a possible photoprotective effect of tetraiodoethylene was observed in the presence of phenanthroline macrocycles. Future work will look to incorporate the influence of macrocycle equilibrium with halogen bonding guests through dynamic combinatorial chemistry in the hope of forming macrocycles as selective halogen bonding hosts.
Experimental
All reagents were purchased from Sigma-Aldrich or Combi-Blocks and were used as received. Deuterated solvents were purchased from Novachem and used as received. 2,6-Pyridinedicarboxaldehyde and 1,10-phenanthroline-2,9-dicarbaldehyde were prepared by literature methods [52, 53]. 1H NMR spectroscopy was performed using a 400 MHz Bruker Avance 3 HD Wide Bore Spectrometer (5 mm BBFO probe) at room temperature (293 K) in CDCl3 and C6D6. 1H NMR spectra were obtained at 399.58 MHz and referenced to residual 1H solvent resonances. 1H, 13C and 19F NMR spectroscopy was performed using a 600 MHz Bruker Avance 3 HD Narrow Bore Spectrometer (5 mm TCI tuneable probe) at room temperature (293 K) in CDCl3 and C6D6. 1H NMR spectra were obtained at 600.1 MHz and referenced to residual 1H solvent resonances. 13C NMR spectra were obtained at 150.9 MHz and referenced to 13C solvent resonances. 19F NMR spectra were obtained at 376.0 MHz. NMR spectra were processed using Bruker Topspin 3.5 software.
Structure determinations
X-ray crystallographic data for the structural data were collected using synchrotron radiation (λ = 0.7108 Å) on the MX1 Beamline of the Australian Synchrotron [54] or with copper radiation (λ = 1.54178 Å) on a Bruker D8 Quest. The structures were solved by intrinsic phasing methods with SHELXT[55] and refined with SHELXL[56] in OLEX2 [57].
Tetraiodoethylene.Bis(2,9-dimethyl-1,10-phenanthroline)
C14H12N2·0.5(C2I4), M = 474.07, colourless block, 0.39 × 0.27 × 0.23 mm3, triclinic, P1, a = 7.7984 (7), b = 4.6090 (9), c = 26.274 (5) Å, α = 76.204 (4) β = 78.624 (3), γ = 67.520 (4)°, V = 741.54 (12) Å3, Z = 2, 2θmax = 64.19°, Dc = 2.123 g cm–3, μ = 33.2 mm–1. Bruker D8 Quest, λ = 1.54178 Å, 18,350 reflections collected, 2867 unique (Rint = 0.062). Final GooF = 1.07, R1 = 0.061, wR2 = 0.177, R indices based on 2527 reflections with I > 2σ(I), |Δρ|max 2.986 e Å–3, 174 parameters, 0 restraints. CCDC number 2107298.
2c
C36H32N8, M = 576.69, colourless plate, 0.20 × 0.05 × 0.05 mm3, monoclinic, P21 (No. 4), a = 13.497 (3), b = 4.6090 (9), c = 26.274 (5) Å, β = 90.51 (3)°, V = 1634.4 (6) Å3, Z = 2, 2θmax = 64.19°, Dc = 1.172 g cm–3, μ = 0.07 mm–1. Synchrotron, λ = 0.7108 Å, 14,889 reflections collected, 8334 unique (Rint = 0.046). Final GooF = 1.12, R1 = 0.051, wR2 = 0.151, R indices based on 7421 reflections with I > 2σ(I), |Δρ|max 0.279 e Å–3, 397 parameters, 1 restraint. CCDC number 2107297.
Variata
The crystal structure indicated a large void running through the centre of the stacked macrocycles. Attempts to model the visible Fourier peaks failed to give a satisfactory refinement, and a solvent mask was applied.
General procedure for synthesis of 2,6-pyridinedicarboxaldehyde and diamine macrocycles
This procedure was performed using a modified literature method [26]. A solution of 2,6-pyridinedicarboxaldehyde (1 equivalent) in acetonitrile (1.5 mL/mol) was added dropwise to a solution of diamine (1 equivalent), in acetonitrile (4.0 mL/mol) at ~ 0.40 mL/minute. The reaction mixture was stirred overnight, and a precipitate is formed. The precipitate was collected on a glass frit and was washed with additional acetonitrile.
General procedure for synthesis of 1,10-phenanthroline-2,9-dicarbaldehyde and diamine macrocycles
This procedure was performed using a modified literature method [15]. A solution of 1,10-phenanthroline-2,9-dicarbaldehyde (1 equivalent) in methanol (1.5 mL/mol) was added dropwise to a solution of diamine (1 equivalent), in methanol (4.0 mL/mol) at ~ 0.40 mL/minute. The reaction mixture was stirred overnight, and a precipitate is formed. The precipitate was collected on a glass frit and was washed with additional cold methanol.
Synthesis of macrocycle from 2,6-pyridinedicarboxaldehyde and 1,4-diaminobutane, 1c
2,6-Pyridinedicarboxaldehyde (0.12 g, 8.8 mmol) in acetonitrile (25 mL). 1,4-Diaminobutane (0.08 g, 9.0 mmol) in acetonitrile (75 mL). The 1H NMR spectroscopic data for the major product was consistent with literature values [58]. Yield: 0.09 g (27%). 1H NMR (CDCl3) δ 8.39 (s, 2H), 7.96 (d, 2H, J = 7.74 Hz), 7.74 (t, 1H, J = 7.74 Hz), 3.71 (m, 4H), 1.80 (m, 4H) ppm 13C NMR (CDCl3) δ 161.7, 154.3, 137.1, 125.2, 122.2, 61.2, 28.5 ppm.
![figure a](http://media.springernature.com/lw685/springer-static/image/art%3A10.1007%2Fs10847-022-01137-2/MediaObjects/10847_2022_1137_Figa_HTML.png)
Synthesis of macrocycle from 1,10-phenanthroline-2,9-dicarbaldehyde and 1,4-diaminobutane, 2c
1,10-Phenanthroline-2,9-dicarbaldehyde (0.03 g, 0.13 mmol) in hot methanol (2.6 mL). 1,4-Diaminobutane (0.011 g, 0.13 mmol) in methanol (1.6 mL). Crystals for solid state X-ray diffractometric analysis were formed using hot recrystallisation from methanol. Yield: 0.03 g (40%). 1H NMR (C6D6) δ 8.97 (HD, s, 4H), 8.38 (HB, d, 4H, J = 8.4 Hz), 7.51 (HC, d, 4H, J = 8.8 Hz), 7.17 (HA, m, 4H), 3.64 (HE, m, 8H), 1.82 (HF, m, 8H) ppm 13C NMR (CDCl3) δ 163.3, 154.7, 145.6, 136.6, 129.5, 127.2, 120.1, 60.4, 27.1 ppm. LR MS calculated for C36H33N8 (M+) 577.28, found 577.28.
Synthesis of templated macrocycle from 1,10-phenanthroline-2,9-dicarbaldehyde and 1,4-diaminobutane
1,10-Phenanthroline-2,9-dicarbaldehyde (0.04 g, 0.12 mmol) and tetraiodoethylene (0.05 g, 0.12 mmol) was dissolved in hot methanol (30 mL) and the solution was cooled to room temperature. This solution was added dropwise to a solution of 1,4-diaminobutane (0.10 g, 0.12 mmol) in methanol (20 mL) over 20 min. The reaction mixture was stirred overnight, and a precipitate was formed. The precipitate was collected on a glass frit and was washed with additional cold methanol. Yield: 0.04 g (69%). 1H NMR (C6D6) δ 8.54 (m, 4H), 8.14 (m, 4H), 8.12 (m, 4H), 7.10 (m, 4H), 2.43 (m, 8H), 1.12 (m, 8H). 13C NMR (CDCl3) δ 152.7, 145.9, 137.9, 131.6, 129.0, 120.5, 60.4, 28.63. Vmax/cm−1 3479 (br, C-H) 2899 (C-H), 1652 (s, C = N), 673 (s, C-I).
General procedure for crystallisation of macrocycles
A dried macrocycle sample was transferred to a glass vial. A minimal amount of solvent was added and stirring was used to assist dissolution. The sample was heated to encourage dissolution, and hot solvent was added until the solid was entirely dissolved. The solution was boiled until the solvent was reduced to a minimum volume without precipitation. The vial was removed from the heat and was left to cool slowly to room temperature. Methanol, propan-2-ol, benzene, toluene, dimethyl sulfoxide, carbon tetrachloride, cyclohexane and acetonitrile were used throughout.
General procedure for cocrystallisation
Dicarbonylheterocycle and guest molecule were combined in a 1:1 molar equivalent. A minimal amount of solvent was added, and the solution was heated until the solids are entirely dissolved. The solution was capped and allowed to cool to room temperature. The choice of solvent depends on the dicarbonylheterocycle and guest solubility. Dichloromethane, methanol, propan-2-ol, benzene and acetonitrile were used throughout.
General procedure for 1H NMR titration analysis
A stock solution of macrocycle (0.001 M, 1000 μL) in deuterated solvent was prepared using a micro syringe. A stock solution of guest molecule (0.020 M, 1000 μL) was prepared in the same manner. A 400 μL sample of the macrocycle stock solution was transferred to an NMR tube using a volumetric syringe. The sample was then analysed using 1H NMR spectroscopy. Aliquots of guest stock solution were added via a septum lid using a micro syringe and analysed sequentially [0.1, 1, 10 equivalents].
References
Novosjolova, I.: The mukaiyama reagent: An efficient condensation agent. Synlett 24, 135–136 (2012). https://doi.org/10.1055/s-0032-1317530
Almalki, F.A.: A Corey-Seebach Macrocyclisation strategy for the synthesis of riccardin C and an unnatural macrocyclic Bis(bibenzyl) analogue. Eur. J. Org. Chem. 34, 5738–5746 (2016). https://doi.org/10.1002/ejoc.201601179
Meng Q, Hesse M (1992) Ring closure methods in the synthesis of macrocyclic natural products In: Macrocycles. Springer Berlin Heidelberg, Berlin, Heidelberg, pp 107–176. doi: https://doi.org/10.1007/3-540-54348-1_9
Osowska, K., Miljanić, O.Š: Oxidative kinetic self-sorting of a dynamic imine library. J Am Chem Soc 133(4), 724–727 (2011). https://doi.org/10.1021/ja109754t
R. Korupoju S, S. Zacharias P,: New optically active hexaaza triphenolic macrocycles: synthesis, molecular structure and crystal packing features. Chem. Commun. 12, 1267–1268 (1998). https://doi.org/10.1039/A802201A
Adams, H., Bailey, N.A., Fenton, D.E., Moss, S., de Barbarin, C.O.R., Jones, G.: Copper(II) complexes of pyrrole-containing Schiff-base macrocycles: crystal and molecular structures of a mononuclear macrocyclic complex, and of pyrrole-2,5-dicarbaldehyde. J. Chem. Soc., Dalton Trans. 3, 693–699 (1986). https://doi.org/10.1039/DT9860000693
Martí-Centelles, V., Pandey, M.D., Burguete, M.I., Luis, S.V.: Macrocyclization reactions: The importance of conformational, configurational, and template-induced preorganization. Chem Rev 115(16), 8736–8834 (2015). https://doi.org/10.1021/acs.chemrev.5b00056
Clair, S., de Oteyza, D.G.: Controlling a chemical coupling reaction on a surface: Tools and strategies for on-surface synthesis. Chem. Rev. 119(7), 4717–4776 (2019). https://doi.org/10.1021/acs.chemrev.8b00601
Layer, R.W.: The chemistry of imines. Chem. Rev. 63(5), 489–510 (1963). https://doi.org/10.1021/cr60225a003
Krakowiak, K.E., Bradshaw, J.S., Jiang, W., Dalley, N.K., Wu, G., Izatt, R.M.: Preparation and structural properties of large-cavity peraza macrocycles containing pyridine, phenanthroline, or piperazine subcyclic units. J. Org. Chem. 56(8), 2675–2680 (1991). https://doi.org/10.1021/jo00008a019
Newkome GR (2003) Chapter 8 Eight-membered and larger rings. In: Gribble GW, Joule JA (eds) Progress in Heterocyclic Chemistry, vol 15. Elsevier, pp 431–449. doi: https://doi.org/10.1016/S0959-6380(03)80020-X
Shimakoshi, H., Kai, T., Aritome, I., Hisaeda, Y.: Syntheses of large-membered macrocycles having multiple hydrogen bonding moieties. Tetrahedron Lett. 43(46), 8261–8264 (2002). https://doi.org/10.1016/S0040-4039(02)02022-1
Saggiomo, V., Lüning, U.: On the formation of imines in water—a comparison. Tetrahedron Lett. 50(32), 4663–4665 (2009). https://doi.org/10.1016/j.tetlet.2009.05.117
Chen, B., Wang, L., Dai, W., Shang, S., Lv, Y., Gao, S.: Metal-free and solvent-free oxidative coupling of amines to imines with mesoporous carbon from macrocyclic compounds. ACS Catal. 5(5), 2788–2794 (2015). https://doi.org/10.1021/acscatal.5b00244
Tsukuda, T., Maeda, S., Yasui, M., Tamane, T., Tsubomura, T.: Structure of a Barium(II) complex sandwiched by a schiff base macrocycle. Bull. Chem. Soc. Jpn. 81(3), 358–360 (2008). https://doi.org/10.1246/bcsj.81.358
Lindoy, L.F.: Metal-Ion control in synthesis of Schiff base complexes. Q Rev Chem Soc 25(3), 379–391 (1971). https://doi.org/10.1039/qr9712500379
Pilkington, N.H., Robson, R.: Complexes of binucleating ligands. 3. novel complexes of a macrocyclic binucleating ligand. Aust J Chem 23(11), 2225–2236 (1970). https://doi.org/10.1071/CH9702225
Grannas, M.J., Hoskins, B.F., Robson, R.: Synthesis and X-Ray crystal-structures of a calixarene-related, tetraamino, tetraphenolic, polynucleating macrocyclic ligand and Its Zn-II(4) and Co-III(3) derivatives. Inorg Chem 33(6), 1071–1079 (1994). https://doi.org/10.1021/ic00084a017
Borisova, N.E., Reshetova, M.D., Ustynyuk, Y.A.: Metal-free methods in the synthesis of macrocyclic schiff bases. Chem. Rev. 107(1), 46–79 (2007). https://doi.org/10.1021/cr0683616
Jiang, J., MacLachlan, M.J.: Unsymmetrical triangular schiff base macrocycles with cone conformations. Org. Lett. 12(5), 1020–1023 (2010). https://doi.org/10.1021/ol100028s
Yudin, A.K.: Macrocycles: lessons from the distant past, recent developments, and future directions. Chem. Sci. 6(1), 30–49 (2015). https://doi.org/10.1039/C4SC03089C
Borisova, N.E., Reshetova, M.D., Ustynyuk, Y.A.: Metal-free methods in the synthesis of macrocyclic schiff bases. Chem Rev 107(1), 46–79 (2007). https://doi.org/10.1021/cr0683616
Chen, H., Huang, C., Deng, Y., Sun, Q., Zhang, Q.L., Zhu, B.X., Ni, X.L.: Solvent-switched Schiff-base macrocycles: Self-sorting and self-assembly-dependent unconventional organic particles. ACS Nano 13(3), 2840–2848 (2019). https://doi.org/10.1021/acsnano.8b09478
Sarnicka, A., Starynowicz, P., Lisowski, J.: Controlling the macrocycle size by the stoichiometry of the applied template ion. Chem. Commun. 48(16), 2237–2239 (2012). https://doi.org/10.1039/C2CC16673A
He, Z., Ye, G., Jiang, W.: Imine Macrocycle with a Deep Cavity: Guest-Selected Formation of syn/anti Configuration and Guest-Controlled Reconfiguration. Chemistry A European Journal 21(7), 3005–3012 (2015). https://doi.org/10.1002/chem.201405912
Katayev, E.A., Reshetova, M.D., Ustynyuk, Y.A.: Binuclear and polynuclear transition metal complexes with macrocyclic ligands 4 New polydentate azomethine ligands based on 2,5-diformylpyrrole and 2,6-diformylpyridine. Russ. Chem. Bull. 53(2), 335–339 (2004). https://doi.org/10.1023/B:RUCB.0000030807.35988.a5
Rezaeivala, M., Keypour, H.: Schiff base and non-Schiff base macrocyclic ligands and complexes incorporating the pyridine moiety – The first 50 years. Coord. Chem. Rev. 280, 203–253 (2014). https://doi.org/10.1016/j.ccr.2014.06.007
Houjou, H., Lee, S.-K., Hishikawa, Y., Nagawa, Y., Hiratani, K.: Highly selective formation of 2∶2 macrocycles from a novel hydroxybenzaldehyde derivative and diamines. Chem. Commun. 22, 2197–2198 (2000). https://doi.org/10.1039/B005536K
Cordes, E.H., Jencks, W.P.: On the Mechanism of Schiff Base Formation and Hydrolysis. J Am Chem Soc 84(5), 832–837 (1962). https://doi.org/10.1021/ja00864a031
Simion, A., Simion, C., Kanda, T., Nagashima, S., Mitoma, Y., Yamada, T., Mimura, K., Tashiro, M.: Synthesis of imines, diimines and macrocyclic diimines as possible ligands, in aqueous solution. Journal of the Chemical Society, Perkin Transactions 1(17), 2071–2078 (2001). https://doi.org/10.1039/B102749M
Jarrahpour, A.A., Khalili, D.: Synthesis of some new bis-Schiff bases of isatin and 5-fluoroisatin in a water suspension medium. Molecules (Basel, Switzerland) 11(1), 59–63 (2006). https://doi.org/10.3390/11010059
Morales-Sanfrutos, J., Ortega-Muñoz, M., Lopez-Jaramillo, J., Hernandez-Mateo, F., Santoyo-Gonzalez, F.: Synthesis of Molecular Nanocages by Click Chemistry. J. Org. Chem. 73(19), 7772–7774 (2008). https://doi.org/10.1021/jo801324x
Maltese, F., van der Kooy, F., Verpoorte, R.: Solvent derived artifacts in natural products chemistry. Nat Prod Commun 4(3), 193 (2009). https://doi.org/10.1177/1934578x0900400326
Kwak, K., Rosenfeld, D.E., Chung, J.K., Fayer, M.D.: Solute−solvent complex switching dynamics of chloroform between acetone and dimethylsulfoxide−two-dimensional IR chemical exchange spectroscopy. J. Phys. Chem. B 112(44), 13906–13915 (2008). https://doi.org/10.1021/jp806035w
Lawson, K.V., Rose, T.E., Harran, P.G.: Template-constrained macrocyclic peptides prepared from native, unprotected precursors. Proc. Natl. Acad. Sci. 110(40), E3753–E3760 (2013). https://doi.org/10.1073/pnas.1311706110
Howlader, P., Mukherjee, P.S.: Solvent directed synthesis of molecular cage and metal organic framework of Copper(II) paddlewheel cluster. Isr. J. Chem. 59(3–4), 292–298 (2019). https://doi.org/10.1002/ijch.201800155
Kulchat, S., Chaur, M.N., Lehn, J.-M.: Kinetic selectivity and thermodynamic features of competitive imine formation in dynamic covalent chemistry. Chemistry A European Journal 23(46), 11108–11118 (2017). https://doi.org/10.1002/chem.201702088
Pan, F., Dashti, M., Reynolds, M.R., Rissanen, K., Trant, J.F., Beyeh, N.K.: Halogen bonding and host–guest chemistry between N-alkylammonium resorcinarene halides, diiodoperfluorobutane and neutral guests. Beilstein J. Org. Chem. 15, 947–954 (2019). https://doi.org/10.3762/bjoc.15.91
Priimagi, A., Cavallo, G., Metrangolo, P., Resnati, G.: The halogen bond in the design of functional supramolecular materials: recent advances. Acc. Chem. Res. 46(11), 2686–2695 (2013). https://doi.org/10.1021/ar400103r
Chen, Z., Wang, G., Xu, Z., Wang, J., Yu, Y., Cai, T., Shao, Q., Shi, J., Zhu, W.: How do distance and solvent affect halogen bonding involving negatively charged donors? J. Phys. Chem. B 120(34), 8784–8793 (2016). https://doi.org/10.1021/acs.jpcb.6b05027
Dang, L., Huang, S., Yin, A.: Halogen bonds in the crystal structure of 2-bromo-1,10-phenanthroline – 1,4-diiodotetrafluorobenzene (2/1), C30H14Br 2F4I2N4. Zeitschrift für Kristallographie - New Crystal Structures 234(3), 469–471 (2019). https://doi.org/10.1515/ncrs-2018-0478
Cavallo, G., Metrangolo, P., Milani, R., Pilati, T., Priimagi, A., Resnati, G., Terraneo, G.: The Halogen Bond. Chem. Rev. 116(4), 2478–2601 (2016). https://doi.org/10.1021/acs.chemrev.5b00484
Pike, S.J., Hunter, C.A., Brammer, L., Perutz, R.N.: Benchmarking of halogen bond strength in solution with nickel fluorides bromine versus iodine and perfluoroaryl versus perfluoroalkyl donors. Chem–A Eur J 25(39), 9237–9241 (2019). https://doi.org/10.1002/chem.201900924
Perkins, C., Libri, S., Adams, H., Brammer, L.: Diiodoacetylene: compact, strong ditopic halogen bond donor. CrystEngComm 14(9), 3033–3038 (2012). https://doi.org/10.1039/C2CE00029F
Mal, P., Breiner, B., Rissanen, K., Nitschke, J.R.: White phosphorus is air-stable within a self-assembled tetrahedral capsule. Science 324(5935), 1697–1699 (2009). https://doi.org/10.1126/science.1175313
Groom, C.R., Bruno, I.J., Lightfoot, M.P., Ward, S.C.: The cambridge structural database. Acta Crystallogr. B 72(2), 171–179 (2016). https://doi.org/10.1107/S2052520616003954
Jiao, T., Chen, L., Yang, D., Li, X., Wu, G., Zeng, P., Zhou, A., Yin, Q., Pan, Y., Wu, B., Hong, X., Kong, X., Lynch, V.M., Sessler, J.L., Li, H.: Trapping white phosphorus within a purely organic molecular container produced by imine condensation. Angew. Chem. Int. Ed. 56(46), 14545–14550 (2017). https://doi.org/10.1002/anie.201708246
Young JA (2007) Bretherick's Handbook of Reactive Chemical Hazards, 7th Edition (Peter G. Urben, ed., assisted by Malcolm J. Pitt), vol 84. Journal of Chemical Education, vol 5. American Chemical Society. doi: https://doi.org/10.1021/ed084p768
Registry of Toxic Effects of Chemical Substances; National Institute for Occupational Safety Health (1987). U.S. Department of Health and Human Services, Public Health Service, Center for Disease Control, National Institute for Occupational Safety and Health,
Patnaik, P.: A Comprehensive Guide to the Hazardous Properties of Chemical Substances. Wiley (2007)
Xu, J., Liu, Y., Hsu, S.H.: Hydrogels based on Schiff base linkages for biomedical applications. Molecules 24(16), 3005 (2019). https://doi.org/10.3390/molecules24163005
Fraschetti, C., Filippi, A., Crestoni, M.E., Marcantoni, E., Glucini, M., Guarcini, L., Montagna, M., Guidoni, L., Speranza, M.: Contact ion pairs on a protonated azamacrocycle: the role of the anion basicity. J. Am. Soc. Mass Spectrom. 27(4), 615–621 (2016). https://doi.org/10.1007/s13361-015-1327-3
Medeiros-Silva, J., Guédin, A., Salgado, G.F., Mergny, J.L., Queiroz, J.A., Cabrita, E.J.: Cruz C (2017) Phenanthroline-bis-oxazole ligands for binding and stabilization of G-quadruplexes. Biochim. Biophys. Acta 5, 1281–1292 (1861). https://doi.org/10.1016/j.bbagen.2016.11.024
Cowieson, N.P., Aragao, D., Clift, M., Ericsson, D.J., Gee, C., Harrop, S.J., Mudie, N., Panjikar, S., Price, J.R., Riboldi-Tunnicliffe, A., Williamson, R., Caradoc-Davies, T.: MX1: a bending-magnet crystallography beamline serving both chemical and macromolecular crystallography communities at the Australian Synchrotron. J Synchrotron Radiat 22(1), 187–190 (2015). https://doi.org/10.1107/s1600577514021717
Sheldrick, G.M.: Crystal structure refinement withSHELXL. Acta Cryst C71(1), 3–8 (2015). https://doi.org/10.1107/s2053229614024218
Sheldrick, G.M.: SHELXT– Integrated space-group and crystal-structure determination. Acta Crystallographica Section A Foundations and Advances 71(1), 3–8 (2015). https://doi.org/10.1107/s2053273314026370
Dolomanov, O.V., Bourhis, L.J., Gildea, R.J., Howard, J.A.K., Puschmann, H.: OLEX2: a complete structure solution, refinement and analysis program. J. Appl. Crystallogr. 42(2), 339–341 (2009). https://doi.org/10.1107/S0021889808042726
Rieger, B., Allmendinger, M., Zell, P., Amin, A., Thewalt, U., Klinga, M.: High yield synthesis, separation and structural characterization of new [n+n]-Polyazamacrocycles. Heterocycles 60, 1065–1081 (2003)
Acknowledgements
The authors acknowledge the muwinina people, the traditional owners of the land on which this research was conducted. The authors acknowledge the Central Science Laboratory at the University of Tasmania for access to their services. C.M.T. thanks the Australian Government for a Research Training Program Scholarship. N.L.K.’s contribution to this research was supported under the Australian Research Council’s Discovery Early Career Research Award funding scheme (project number DE150100263). This research was undertaken in part on the MX1 beamline at the Australian Synchrotron, part of ANSTO.
Funding
Open Access funding enabled and organized by CAUL and its Member Institutions.
Author information
Authors and Affiliations
Corresponding author
Ethics declarations
Conflict of interest
All authors contributed to the study conception and design, material preparation, data collection and analysis. The first draft of the manuscript was written by Chloe M. Taylor and all authors commented on previous versions of the manuscript. All authors read and approved the final manuscript. We declare no competing financial interests.
Additional information
Publisher's Note
Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.
Rights and permissions
Open Access This article is licensed under a Creative Commons Attribution 4.0 International License, which permits use, sharing, adaptation, distribution and reproduction in any medium or format, as long as you give appropriate credit to the original author(s) and the source, provide a link to the Creative Commons licence, and indicate if changes were made. The images or other third party material in this article are included in the article's Creative Commons licence, unless indicated otherwise in a credit line to the material. If material is not included in the article's Creative Commons licence and your intended use is not permitted by statutory regulation or exceeds the permitted use, you will need to obtain permission directly from the copyright holder. To view a copy of this licence, visit http://creativecommons.org/licenses/by/4.0/.
About this article
Cite this article
Taylor, C.M., Kilah, N.L. Synthesis of [2+2] Schiff base macrocycles by a solvent templating strategy and halogen bonding directed assembly. J Incl Phenom Macrocycl Chem 102, 543–555 (2022). https://doi.org/10.1007/s10847-022-01137-2
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s10847-022-01137-2