Abstract
Cu–Zn–Sn (CZT) metallic films were electrodeposited on molybdenum-coated soda lime glass (Mo/SLG) substrates at a constant potential using an aqueous electrolyte solution containing Cu (II), Zn (II), Sn (II) ions, and tri-sodium citrate. The electrochemical growth process of the CZT film has been elucidated by analysis of the film thickness, charge consumption, elemental and phase composition, and surface morphology. Interestingly, it was found that only copper and tin were deposited in the initial stage (30 s) of electrodeposition, and after this zinc began to be incorporated into the film. Further study revealed that H2 evolution was responsible for the failed deposition of zinc on the Mo substrate. The grain size of the CZT film increased over the deposition time. It was also found that the film thickness (except for the first 1 min) increased linearly with the charge consumption, and the film grew at a constant rate. As a result, the composition of the CZT film remained constant throughout the deposition process and copper, tin, and zinc were distributed evenly in the film. Alloy phases of Cu6Sn5 and Cu5Zn8 were found in the CZT film and they were largely constant during the growth of the film. The new insight into the electrodeposition process of CZT films will be very useful for the production of high-quality solar active materials such as Cu2ZnSnS4 and Cu2ZnSnSe4.
Graphical Abstract
Similar content being viewed by others
References
Brenner A (2013) Electrodeposition of alloys: principles and practice. Elsevier, Amsterdam
Kazimierczak H, Ozga P, Świątek Z, Bielańska E (2013) Characterisation of Zn–Mo alloy layers electrodeposited from aqueous citrate solution. J Alloy Compd 578:82–89
Carvalho MF, Barbano EP, Carlos IA (2015) Electrodeposition of copper–tin–zinc ternary alloys from disodium ethylenediaminetetraacetate bath. Surf Coat Technol 262:111–122
Kazimierczak H, Ozga P (2013) Electrodeposition of Sn–Zn and Sn–Zn–Mo layers from citrate solutions. Surf Sci 607:33–38
Kazimierczak H, Ozga P, Socha R (2013) Investigation of electrochemical co-deposition of zinc and molybdenum from citrate solutions. Electrochim Acta 104:378–390
Wang HX (2011) Progress in Thin Film Solar Cells Based on Cu2ZnSnS4. Int J Photoenergy ID: 801292
Ramasamy K, Malik MA, O’Brien P (2012) Routes to copper zinc tin sulfide Cu2ZnSnS4 a potential material for solar cells. Chem Commun 48:5703–5714
Abermann S (2013) Non-vacuum processed next generation thin film photovoltaics: towards marketable efficiency and production of CZTS based solar cells. Sol Energy 94:37–70
Hreid T, Li JJ, Zhang Y, Spratt HJ, Wang HX, Will G (2015) Effects of metal ion concentration on electrodeposited CuZnSn film and its application in kesterite Cu2ZnSnS4 solar cells. RSC Advances 5:65114–65122
Colombara D, Crossay A, Vauche L, Jaime S, Arasimowicz M, Grand PP, Dale P (2015) Electrodeposition of kesterite thin films for photovoltaic applications: quo vadis? Physica Status Solidi (a) 212:88–102
Sarswat PK, Free ML (2013) An assessment of contact engineering for the Cu2ZnSnS4 alternative back contact. Mater Focus 2:244–250
Sarswat PK, Free ML (2012) A comparative study of co-electrodeposited Cu2ZnSnS4 absorber material on fluorinated tin oxide and molybdenum substrates. J Electron Mater 41:2210–2215
Li Y, Yuan T, Jiang L, Liu F, Liu Y, Lai Y (2015) Cu2ZnSnS4 thin film solar cell fabricated by co-electrodeposited metallic precursor. J Mater Sci: Mater Electron 26:204–210
Jeon JO, Lee KD, Seul LO, Seo SW, Lee DK, Kim H, Jeong JH, Ko MJ, Kim B, Son HJ (2014) Highly efficient copper–zinc–tin–selenide (CZTSe) solar cells by electrodeposition. Chem Sus Chem 7:1073–1077
Gougaud C, Rai D, Delbos S, Chassaing E, Lincot D (2013) Electrochemical studies of one-step electrodeposition of Cu–Sn–Zn layers from aqueous electrolytes for photovoltaic applications. J Electrochem Soc 160:D485–D494
Slupska M, Ozga P (2014) Electrodeposition of Sn–Zn–Cu alloys from citrate solutions. Electrochim Acta 141:149–160
Li Y, Yuan T, Jiang L, Su Z, Liu F (2014) Growth and characterization of Cu2ZnSnS4 photovoltaic thin films by electrodeposition and sulfurization. J Alloy Compd 610:331–336
Ananthoju B, Sonia FJ, Kushwaha A, Bahadur D, Medhekar N, Aslam M (2014) Improved structural and optical properties of Cu2ZnSnS4 thin films via optimized potential in single bath electrodeposition. Electrochim Acta 137:154–163
Lee KD, Seo SW, Lee DK, Kim H, Jeong JH, Ko MJ, Kim B, Kim DH, Kim JY (2013) Preparation of Cu2ZnSnS4 thin films via electrochemical deposition and rapid thermal annealing. Thin Solid Films 546:294–298
He X, Shen H, Wang W, Pi J, Hao Y, Shi X (2013) Synthesis of Cu2ZnSnS4 films from co-electrodeposited Cu–Zn–Sn precursors and their microstructural and optical properties. Appl Surf Sci 282:765–769
Guo L, Zhu Y, Gunawan O, Gokmen T, Deline VR, Ahmed S, Romankiw LT, Deligianni H (2014) Electrodeposited Cu2ZnSnSe4 thin film solar cell with 7% power conversion efficiency. Prog Photovoltaics Res Appl 22:58–68
Araki A, Kubo Y, Jimbo K, Maw WS, Katagiri H, Yamazaki M, Oishi K, Takeuchi A (2009) Preparation of Cu2ZnSnS4 thin films by sulfurization of co‐electroplated Cu–Zn–Sn precursors. physica status solidi (c 6(1268):1266
Ahmed S, Reuter KB, Gunawan O, Guo L, Romankiw LT, Deligianni H (2012) A high efficiency electrodeposited Cu2ZnSnS4 solar cell. Adv Energy Mater 2:253–259
Bard AJ, Faulkner LR (2001), Electrochemical methods: fundamentals and applications, 2nd edn.Wiley, New York
Gabe D (1997) The role of hydrogen in metal electrodeposition processes. J Appl Electrochem 27:908–915
Acknowledgements
T. Hreid acknowledges to the PhD scholarship program of Queensland University of Technology. H.W. Thanks to the funding support from Australian Research Council ARC Future Fellow Scheme (FT-120100674).
Author information
Authors and Affiliations
Corresponding authors
Rights and permissions
About this article
Cite this article
Hreid, T., O’Mullane, A.P., Spratt, H.J. et al. Investigation of the electrochemical growth of a Cu–Zn–Sn film on a molybdenum substrate using a citrate solution. J Appl Electrochem 46, 769–778 (2016). https://doi.org/10.1007/s10800-016-0967-8
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s10800-016-0967-8