In accordance with the Federal Grid Company (FGC) standard STO 56947007-29.240.55.143-2013, the allowable current in the wires of the overhead power transmission lines shall be determined by considering the intensity of heat transfer between the wire and air. The heat transfer intensity is determined by the Newton – Richman formula and depends on the heat transfer coefficient, which is the main quantitative characteristic of the heat transfer process. This coefficient should become one of the characteristics of the new generation of wires, and especially, high-temperature wires. The paper describes how this coefficient is calculated using one of the new generation wires as an example.
Similar content being viewed by others
References
R. G. Shakirov, F. R. Ismagilov, N. K. Potapchuk, and T. Yu. Volkova, Principal Aspects of Designing the Overhead Power Transmission Lines: Study Guide [in Russian], Mashinostroenie, Moscow (2015).
STO 56947007-29.240.55.143-2013. Procedure for Calculating the Maximum Allowable Current Loads Based on the Conditions of Preserving the Mechanical Strength of the Wires and Allowable Overall Dimensions of the Overhead Power Lines [in Russian], JSC “FGC UES,” Moscow (2013).
RD 34.20.547 (MT 34-70-037-87). Procedure for Calculating the Maximum Current Loads Based on the Conditions of Heating the Wires for the Operating Power Transmission Lines [in Russian], SPO Soyuztekhenergo, Moscow (1978).
I. I. Levchenko, A. S. Zasypkin, A. A. Alliluyev, and E. I. Satsuk, Diagnostics, Reconstruction and Operation of the Overhead Power Transmission Lines in the Ice-Forming Regions: Study Guide [in Russian], Izd. MÉI, Moscow (2007).
MEK 61597. Electric Wires for the Overhead Power Transmission Lines. Calculation Procedures for Stranded Uninsulated Conductors [in Russian] (1995).
Author information
Authors and Affiliations
Corresponding author
Additional information
Translated from Élektricheskie Stantsii, No. 1, January 2019, pp. 28 – 33.
Rights and permissions
About this article
Cite this article
Shakirov, R.G., Fedorov, N.A. Calculation of Heat Transfer from the Surface of Uninsulated Conductors of New Generation. Power Technol Eng 53, 227–232 (2019). https://doi.org/10.1007/s10749-019-01064-2
Published:
Issue Date:
DOI: https://doi.org/10.1007/s10749-019-01064-2